| Message ID | 20200622192558.152828-2-konradybcio@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for Sony SDM630-based boards | expand |
On Mon 22 Jun 12:25 PDT 2020, Konrad Dybcio wrote: > Add support for pm660(l) SPMI GPIOs. The PMICs feature > 13 and 12 GPIOs respectively, though with a lot of > holes inbetween. > > Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Didn't I ack this change in v2? If so please remember to add such tags when you resubmit the change... Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > index fe0be8a6ebb7..95ca66e24e7c 100644 > --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > @@ -1118,6 +1118,10 @@ static const struct of_device_id pmic_gpio_of_match[] = { > { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 }, > /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */ > { .compatible = "qcom,pms405-gpio", .data = (void *) 12 }, > + /* pm660 has 13 GPIOs with holes on 1, 5, 6, 7, 8 and 10 */ > + { .compatible = "qcom,pm660-gpio", .data = (void *) 13 }, > + /* pm660l has 12 GPIOs with holes on 1, 2, 10, 11 and 12 */ > + { .compatible = "qcom,pm660l-gpio", .data = (void *) 12 }, > /* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */ > { .compatible = "qcom,pm8150-gpio", .data = (void *) 10 }, > /* pm8150b has 12 GPIOs with holes on 3, r and 7 */ > -- > 2.27.0 >
Yes, you did. This was a mistake on my end and I realized it after sending the v3, but I figured there's no point in sending it yet again exclusively for this reason. Hope you don't mind. Regards Konrad
On Tue 23 Jun 01:02 PDT 2020, Konrad Dybcio wrote: > Yes, you did. > > This was a mistake on my end and I realized it > after sending the v3, but I figured there's no > point in sending it yet again exclusively for this reason. > Hope you don't mind. > No worries, try to remember in the future. Thanks, Bjorn
On Mon, Jun 22, 2020 at 9:26 PM Konrad Dybcio <konradybcio@gmail.com> wrote: > Add support for pm660(l) SPMI GPIOs. The PMICs feature > 13 and 12 GPIOs respectively, though with a lot of > holes inbetween. > > Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Patch applied. Yours, Linus Walleij
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index fe0be8a6ebb7..95ca66e24e7c 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1118,6 +1118,10 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 }, /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */ { .compatible = "qcom,pms405-gpio", .data = (void *) 12 }, + /* pm660 has 13 GPIOs with holes on 1, 5, 6, 7, 8 and 10 */ + { .compatible = "qcom,pm660-gpio", .data = (void *) 13 }, + /* pm660l has 12 GPIOs with holes on 1, 2, 10, 11 and 12 */ + { .compatible = "qcom,pm660l-gpio", .data = (void *) 12 }, /* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */ { .compatible = "qcom,pm8150-gpio", .data = (void *) 10 }, /* pm8150b has 12 GPIOs with holes on 3, r and 7 */
Add support for pm660(l) SPMI GPIOs. The PMICs feature 13 and 12 GPIOs respectively, though with a lot of holes inbetween. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 4 ++++ 1 file changed, 4 insertions(+)