@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
new file mode 100644
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z5";
+ compatible = "somc,sumire-row", "qcom,msm8994";
+};
new file mode 100644
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <0xcf 0x20001>;
+ qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+ qcom,board-id = <8 0>;
+
+ /* Kitakami firmware doesn't support PSCI */
+ /delete-node/ psci;
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@0 {
+ label = "Volume Down";
+ gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@1 {
+ label = "Volume Up";
+ gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@2 {
+ label = "Camera Snapshot";
+ gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@3 {
+ label = "Camera Focus";
+ gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* This is for getting crash logs using Android downstream kernels */
+ ramoops@1fe00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x1fe00000 0x0 0x200000>;
+ console-size = <0x100000>;
+ record-size = <0x10000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x80000>;
+ };
+
+ continuous_splash: framebuffer@3401000{
+ reg = <0x0 0x3401000 0x0 0x2200000>;
+ no-map;
+ };
+
+ dfps_data_mem: dfps_data_mem@3400000 {
+ reg = <0x0 0x3400000 0x0 0x1000>;
+ no-map;
+ };
+
+ peripheral_region: peripheral_region@7400000 {
+ reg = <0x0 0x7400000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ modem_region: modem_region@9000000 {
+ reg = <0x0 0x9000000 0x0 0x5a00000>;
+ no-map;
+ };
+
+ tzapp: modem_region@ea00000 {
+ reg = <0x0 0xea00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ fb_region: fb_region@40000000 {
+ reg = <0x00 0x40000000 0x00 0x1000000>;
+ no-map;
+ };
+ };
+};
+
+&blsp_spi0 {
+ status = "okay";
+
+ /* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp_i2c2 {
+ status = "okay";
+
+ /* NXP NFC */
+};
+
+&blsp_i2c4 {
+ status = "okay";
+
+ /* Empty but active */
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ /* SMB1357 charger and sii8620 HDMI/MHL bridge */
+};
+
+&blsp_i2c6 {
+ status = "okay";
+
+ /* Synaptics touchscreen */
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_uart2 {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8994_regulators: pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+ vdd_l1-supply = <&pm8994_s1>;
+ vdd_l2_26_28-supply = <&pm8994_s3>;
+ vdd_l3_11-supply = <&pm8994_s3>;
+ vdd_l4_27_31-supply = <&pm8994_s3>;
+ vdd_l5_7-supply = <&pm8994_s3>;
+ vdd_l6_12_32-supply = <&pm8994_s5>;
+ vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l14_15-supply = <&pm8994_s5>;
+ vdd_l17_29-supply = <&vreg_vph_pwr>;
+ vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l25-supply = <&pm8994_s5>;
+ vdd_lvs1_2 = <&pm8994_s4>;
+
+ pm8994_s1: s1 {};
+ pm8994_s2: s2 {};
+ pm8994_s3: s3 {};
+ pm8994_s4: s4 {};
+ pm8994_s5: s5 {};
+ pm8994_s6: s6 {};
+ pm8994_s7: s7 {};
+
+ pm8994_l1: l1 {};
+ pm8994_l2: l2 {};
+ pm8994_l3: l3 {};
+ pm8994_l4: l4 {};
+ pm8994_l6: l6 {};
+ pm8994_l8: l8 {};
+ pm8994_l9: l9 {};
+ pm8994_l10: l10 {};
+ pm8994_l11: l11 {};
+ pm8994_l12: l12 {};
+ pm8994_l13: l13 {};
+ pm8994_l14: l14 {};
+ pm8994_l15: l15 {};
+ pm8994_l16: l16 {};
+ pm8994_l17: l17 {};
+ pm8994_l18: l18 {};
+ pm8994_l19: l19 {};
+ pm8994_l20: l20 {};
+ pm8994_l21: l21 {};
+ pm8994_l22: l22 {};
+ pm8994_l23: l23 {};
+ pm8994_l24: l24 {};
+ pm8994_l25: l25 {};
+ pm8994_l26: l26 {};
+ pm8994_l27: l27 {};
+ pm8994_l28: l28 {};
+ pm8994_l29: l29 {};
+ pm8994_l30: l30 {};
+ pm8994_l31: l31 {};
+ pm8994_l32: l32 {};
+
+ pm8994_lvs1: lvs1 {};
+ pm8994_lvs2: lvs2 {};
+ };
+
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ pmi8994_s1: s1 {};
+ pmi8994_s2: s2 {};
+ pmi8994_s3: s3 {};
+ pmi8994_bby: boost-bypass {};
+ };
+};
+
+&sdhc1 {
+ status = "okay";
+
+ /* Downstream pushes 2.95V to the sdhci device,
+ * but upstream driver REALLY wants to make vmmc 1.8v
+ * cause of the hs400-1_8v mode. MMC works fine without
+ * that regulator, so let's not use it for now.
+ * vqmmc is also disabled cause driver stll complains.
+ *
+ * vmmc-supply = <&pm8994_l20>;
+ * vqmmc-supply = <&pm8994_s4>;
+ */
+};
Add device tree support for the Sony Xperia Z5 smartphone. It's based on Sony Kitakami platform (msm8994) and hence a Kitakami-common DTSI has been created so as to reduce clutter when remaining devices are added. The board currently supports * Serial * SDHCI * I2C * Regulator configuration * pstore log dump * GPIO keys Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../msm8994-sony-xperia-kitakami-sumire.dts | 13 + .../qcom/msm8994-sony-xperia-kitakami.dtsi | 235 ++++++++++++++++++ 3 files changed, 249 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi