diff mbox series

[2/2] arm64: dts: qcom: sdm845: Switch SPI to use GPIO for CS

Message ID 20200624170746.2.I0cabe4244069dd6e3ba47d522c54d4a36ff413f2@changeid (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: qcom: sc7180: Switch SPI to use GPIO for CS | expand

Commit Message

Douglas Anderson June 25, 2020, 12:08 a.m. UTC 
This is like the same change for sc7180 but just for sdm845.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 113 +++++++++++++++++++++++----
 1 file changed, 97 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8eb5a31346d2..417cf1530848 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -12,6 +12,7 @@ 
 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
@@ -837,6 +838,7 @@  spi0: spi@880000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -874,6 +876,7 @@  spi1: spi@884000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi1_default>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -911,6 +914,7 @@  spi2: spi@888000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi2_default>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -948,6 +952,7 @@  spi3: spi@88c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi3_default>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -985,6 +990,7 @@  spi4: spi@890000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi4_default>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1022,6 +1028,7 @@  spi5: spi@894000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi5_default>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1059,6 +1066,7 @@  spi6: spi@898000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi6_default>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1096,6 +1104,7 @@  spi7: spi@89c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi7_default>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1145,6 +1154,7 @@  spi8: spi@a80000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi8_default>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1182,6 +1192,7 @@  spi9: spi@a84000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi9_default>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1219,6 +1230,7 @@  spi10: spi@a88000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi10_default>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1256,6 +1268,7 @@  spi11: spi@a8c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi11_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1293,6 +1306,7 @@  spi12: spi@a90000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi12_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1330,6 +1344,7 @@  spi13: spi@a94000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi13_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1367,6 +1382,7 @@  spi14: spi@a98000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi14_default>;
 				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1404,6 +1420,7 @@  spi15: spi@a9c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_default>;
 				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 84 GPIO_ACTIVE_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -2002,129 +2019,193 @@  pinmux {
 			qup_spi0_default: qup-spi0-default {
 				pinmux {
 					pins = "gpio0", "gpio1",
-					       "gpio2", "gpio3";
+					       "gpio2";
 					function = "qup0";
 				};
+				pinmux-cs {
+					pins = "gpio3";
+					function = "gpio";
+				};
 			};
 
 			qup_spi1_default: qup-spi1-default {
 				pinmux {
 					pins = "gpio17", "gpio18",
-					       "gpio19", "gpio20";
+					       "gpio19";
 					function = "qup1";
 				};
+				pinmux-cs {
+					pins = "gpio20";
+					function = "gpio";
+				};
 			};
 
 			qup_spi2_default: qup-spi2-default {
 				pinmux {
 					pins = "gpio27", "gpio28",
-					       "gpio29", "gpio30";
+					       "gpio29";
 					function = "qup2";
 				};
+				pinmux-cs {
+					pins = "gpio30";
+					function = "gpio";
+				};
 			};
 
 			qup_spi3_default: qup-spi3-default {
 				pinmux {
 					pins = "gpio41", "gpio42",
-					       "gpio43", "gpio44";
+					       "gpio43";
 					function = "qup3";
 				};
+				pinmux-cs {
+					pins = "gpio44";
+					function = "gpio";
+				};
 			};
 
 			qup_spi4_default: qup-spi4-default {
 				pinmux {
 					pins = "gpio89", "gpio90",
-					       "gpio91", "gpio92";
+					       "gpio91";
 					function = "qup4";
 				};
+				pinmux-cs {
+					pins = "gpio92";
+					function = "gpio";
+				};
 			};
 
 			qup_spi5_default: qup-spi5-default {
 				pinmux {
 					pins = "gpio85", "gpio86",
-					       "gpio87", "gpio88";
+					       "gpio87";
 					function = "qup5";
 				};
+				pinmux-cs {
+					pins = "gpio88";
+					function = "gpio";
+				};
 			};
 
 			qup_spi6_default: qup-spi6-default {
 				pinmux {
 					pins = "gpio45", "gpio46",
-					       "gpio47", "gpio48";
+					       "gpio47";
 					function = "qup6";
 				};
+				pinmux-cs {
+					pins = "gpio48";
+					function = "gpio";
+				};
 			};
 
 			qup_spi7_default: qup-spi7-default {
 				pinmux {
 					pins = "gpio93", "gpio94",
-					       "gpio95", "gpio96";
+					       "gpio95";
 					function = "qup7";
 				};
+				pinmux-cs {
+					pins = "gpio96";
+					function = "gpio";
+				};
 			};
 
 			qup_spi8_default: qup-spi8-default {
 				pinmux {
 					pins = "gpio65", "gpio66",
-					       "gpio67", "gpio68";
+					       "gpio67";
 					function = "qup8";
 				};
+				pinmux-cs {
+					pins = "gpio68";
+					function = "gpio";
+				};
 			};
 
 			qup_spi9_default: qup-spi9-default {
 				pinmux {
 					pins = "gpio6", "gpio7",
-					       "gpio4", "gpio5";
+					       "gpio4";
 					function = "qup9";
 				};
+				pinmux-cs {
+					pins = "gpio5";
+					function = "gpio";
+				};
 			};
 
 			qup_spi10_default: qup-spi10-default {
 				pinmux {
 					pins = "gpio55", "gpio56",
-					       "gpio53", "gpio54";
+					       "gpio53";
 					function = "qup10";
 				};
+				pinmux-cs {
+					pins = "gpio54";
+					function = "gpio";
+				};
 			};
 
 			qup_spi11_default: qup-spi11-default {
 				pinmux {
 					pins = "gpio31", "gpio32",
-					       "gpio33", "gpio34";
+					       "gpio33";
 					function = "qup11";
 				};
+				pinmux-cs {
+					pins = "gpio34";
+					function = "gpio";
+				};
 			};
 
 			qup_spi12_default: qup-spi12-default {
 				pinmux {
 					pins = "gpio49", "gpio50",
-					       "gpio51", "gpio52";
+					       "gpio51";
 					function = "qup12";
 				};
+				pinmux-cs {
+					pins = "gpio52";
+					function = "gpio";
+				};
 			};
 
 			qup_spi13_default: qup-spi13-default {
 				pinmux {
 					pins = "gpio105", "gpio106",
-					       "gpio107", "gpio108";
+					       "gpio107";
 					function = "qup13";
 				};
+				pinmux-cs {
+					pins = "gpio108";
+					function = "gpio";
+				};
 			};
 
 			qup_spi14_default: qup-spi14-default {
 				pinmux {
 					pins = "gpio33", "gpio34",
-					       "gpio31", "gpio32";
+					       "gpio31";
 					function = "qup14";
 				};
+				pinmux-cs {
+					pins = "gpio32";
+					function = "gpio";
+				};
 			};
 
 			qup_spi15_default: qup-spi15-default {
 				pinmux {
 					pins = "gpio81", "gpio82",
-					       "gpio83", "gpio84";
+					       "gpio83";
 					function = "qup15";
 				};
+				pinmux-cs {
+					pins = "gpio84";
+					function = "gpio";
+				};
 			};
 
 			qup_uart0_default: qup-uart0-default {