[v3,12/13] arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree

Message ID	20200625182118.131476-13-konradybcio@gmail.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=dPzO=AG=vger.kernel.org=linux-arm-msm-owner@kernel.org> From: Konrad Dybcio <konradybcio@gmail.com> To: skrzynka@konradybcio.pl Cc: Konrad Dybcio <konradybcio@gmail.com>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Kees Cook <keescook@chromium.org>, Anton Vorontsov <anton@enomsg.org>, Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 12/13] arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree Date: Thu, 25 Jun 2020 20:21:16 +0200 Message-Id: <20200625182118.131476-13-konradybcio@gmail.com> In-Reply-To: <20200625182118.131476-1-konradybcio@gmail.com> References: <20200625182118.131476-1-konradybcio@gmail.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk
Series	msm8992 DTS updates, peripheral enablement \| expand [v3,00/13] msm8992 DTS updates, peripheral enablement [v3,01/13] arm64: dts: qcom: msm8992: Modernize the DTS style [v3,02/13] arm64: dts: qcom: msm8992: Fix SDHCI1 [v3,03/13] arm64: dts: qcom: bullhead: Add qcom,msm-id [v3,04/13] arm64: dts: qcom: bullhead: Move UART pinctrl to SoC [v3,05/13] arm64: dts: qcom: msm8992: Add a proper CPU map [v3,06/13] arm64: dts: qcom: msm8992: Add a SCM node [v3,07/13] arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device [v3,08/13] arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes [v3,09/13] arm64: dts: qcom: msm8992: Add PMU node [v3,10/13] arm64: dts: qcom: msm8992: Add PSCI support. [v3,11/13] arm64: dts: qcom: msm8992: Add RPMCC node [v3,12/13] arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree [v3,13/13] arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 0f2c33d611df..344cdeb68b16 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts new file mode 100644 index 000000000000..ac9b2f325fc1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + model = "Xiaomi Mi 4C"; + compatible = "xiaomi,libra", "qcom,msm8992"; + /* required for bootloader to select correct board */ + qcom,msm-id = <251 0 252 0>; + qcom,pmic-id = <65545 65546 0 0>; + qcom,board-id = <12 0>; + + /* This enables graphical output via bootloader-enabled display */ + chosen { + bootargs = "earlycon=tty0 console=tty0"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@3404000 { + status= "okay"; + compatible = "simple-framebuffer"; + reg = <0 0x3404000 0 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* This is for getting crash logs using Android downstream kernels */ + ramoops@dfc00000 { + compatible = "ramoops"; + reg = <0x0 0xdfc00000 0x0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; + + continuous_splash: framebuffer@3401000{ + reg = <0x0 0x3401000 0x0 0x2200000>; + no-map; + }; + + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0x0 0x3400000 0x0 0x1000>; + no-map; + }; + + peripheral_region: peripheral_region@7400000 { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; + }; + + modem_region: modem_region@9000000 { + reg = <0x0 0x9000000 0x0 0x5a00000>; + no-map; + }; + + tzapp: modem_region@ea00000 { + reg = <0x0 0xea00000 0x0 0x1900000>; + no-map; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + /* Atmel or Synaptics touchscreen */ +}; + +&blsp_i2c5 { + status = "okay"; + + /* Silabs si4705 FM transmitter */ +}; + +&blsp_i2c6 { + status = "okay"; + + /* NCI NFC, + * TI USB320 Type-C controller, + * Pericom 30216a USB (de)mux switch + */ +}; + +&blsp_i2c7 { + status = "okay"; + + /* cm36686 proximity and ambient light sensor */ +}; + +&blsp_i2c13 { + status = "okay"; + + /* ST lsm6db0 gyro/accelerometer */ +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_l1-supply = <&pm8994_s7>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + pm8994_s1: s1 { + /* unused */ + status = "disabled"; + }; + + pm8994_s2: s2 { + /* unused */ + status = "disabled"; + }; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8994_l5: l5 { + /* unused */ + status = "disabled"; + }; + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l7: l7 { + /* unused */ + status = "disabled"; + }; + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + mmc-hs400-1_8v; + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; +};

[v3,12/13] arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree

Commit Message

Patch