diff mbox series

[v3,1/2] phy: qcom-snps: Add runtime suspend and resume handlers

Message ID 20200625195444.15130-2-wcheng@codeaurora.org (mailing list archive)
State Accepted, archived
Commit 0d75f508a9d56133a2834215959cde4605c804d1
Headers show
Series phy: qcom-snps: Add runtime suspend and resume handlers | expand

Commit Message

Wesley Cheng June 25, 2020, 7:54 p.m. UTC
Allow for the PHY to be put into a powered down state when possible.
Add the required suspend and resume callbacks, which will determine
what resources can be turned off depending on the cable status.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)

Comments

Vinod Koul June 29, 2020, 9:44 a.m. UTC | #1
Hi Wesley,

On 25-06-20, 12:54, Wesley Cheng wrote:
> Allow for the PHY to be put into a powered down state when possible.
> Add the required suspend and resume callbacks, which will determine
> what resources can be turned off depending on the cable status.
> 
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>

Please do not add this tag unless someone send it explictly over the
email.. I do not recall sending a review tag

> ---
>  drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> index 4d74045271eb..152d8633f4ea 100644
> --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> @@ -104,6 +104,63 @@ static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
>  	readl_relaxed(base + offset);
>  }
>  
> +static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
> +{
> +	dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY\n");
> +
> +	if (hsphy->mode == PHY_MODE_USB_HOST) {
> +		/* Enable auto-resume to meet remote wakeup timing */
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +					   USB2_PHY_USB_PHY_HS_PHY_CTRL2,
> +					   USB2_AUTO_RESUME,
> +					   USB2_AUTO_RESUME);
> +		usleep_range(500, 1000);
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +					   USB2_PHY_USB_PHY_HS_PHY_CTRL2,
> +					   0, USB2_AUTO_RESUME);
> +	}
> +
> +	clk_disable_unprepare(hsphy->cfg_ahb_clk);
> +	return 0;
> +}
> +
> +static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
> +{
> +	int ret;
> +
> +	dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n");
> +
> +	ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
> +	if (ret) {
> +		dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev)
> +{
> +	struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
> +
> +	if (!hsphy->phy_initialized)
> +		return 0;
> +
> +	qcom_snps_hsphy_suspend(hsphy);
> +	return 0;
> +}
> +
> +static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)
> +{
> +	struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
> +
> +	if (!hsphy->phy_initialized)
> +		return 0;
> +
> +	qcom_snps_hsphy_resume(hsphy);
> +	return 0;
> +}
> +
>  static int qcom_snps_hsphy_init(struct phy *phy)
>  {
>  	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
> @@ -212,6 +269,11 @@ static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
>  };
>  MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
>  
> +static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
> +	SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend,
> +			   qcom_snps_hsphy_runtime_resume, NULL)
> +};
> +
>  static int qcom_snps_hsphy_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -255,6 +317,14 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> +	/*
> +	 * Prevent runtime pm from being ON by default. Users can enable
> +	 * it using power/control in sysfs.
> +	 */
> +	pm_runtime_forbid(dev);
> +
>  	generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
>  	if (IS_ERR(generic_phy)) {
>  		ret = PTR_ERR(generic_phy);
> @@ -269,6 +339,8 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
>  	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>  	if (!IS_ERR(phy_provider))
>  		dev_dbg(dev, "Registered Qcom-SNPS HS phy\n");
> +	else
> +		pm_runtime_disable(dev);
>  
>  	return PTR_ERR_OR_ZERO(phy_provider);
>  }
> @@ -277,6 +349,7 @@ static struct platform_driver qcom_snps_hsphy_driver = {
>  	.probe		= qcom_snps_hsphy_probe,
>  	.driver = {
>  		.name	= "qcom-snps-hs-femto-v2-phy",
> +		.pm = &qcom_snps_hsphy_pm_ops,
>  		.of_match_table = qcom_snps_hsphy_of_match_table,
>  	},
>  };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 4d74045271eb..152d8633f4ea 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -104,6 +104,63 @@  static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
 	readl_relaxed(base + offset);
 }
 
+static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
+{
+	dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY\n");
+
+	if (hsphy->mode == PHY_MODE_USB_HOST) {
+		/* Enable auto-resume to meet remote wakeup timing */
+		qcom_snps_hsphy_write_mask(hsphy->base,
+					   USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+					   USB2_AUTO_RESUME,
+					   USB2_AUTO_RESUME);
+		usleep_range(500, 1000);
+		qcom_snps_hsphy_write_mask(hsphy->base,
+					   USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+					   0, USB2_AUTO_RESUME);
+	}
+
+	clk_disable_unprepare(hsphy->cfg_ahb_clk);
+	return 0;
+}
+
+static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
+{
+	int ret;
+
+	dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n");
+
+	ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
+	if (ret) {
+		dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev)
+{
+	struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+	if (!hsphy->phy_initialized)
+		return 0;
+
+	qcom_snps_hsphy_suspend(hsphy);
+	return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)
+{
+	struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+	if (!hsphy->phy_initialized)
+		return 0;
+
+	qcom_snps_hsphy_resume(hsphy);
+	return 0;
+}
+
 static int qcom_snps_hsphy_init(struct phy *phy)
 {
 	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
@@ -212,6 +269,11 @@  static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
 
+static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
+	SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend,
+			   qcom_snps_hsphy_runtime_resume, NULL)
+};
+
 static int qcom_snps_hsphy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -255,6 +317,14 @@  static int qcom_snps_hsphy_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Prevent runtime pm from being ON by default. Users can enable
+	 * it using power/control in sysfs.
+	 */
+	pm_runtime_forbid(dev);
+
 	generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
 	if (IS_ERR(generic_phy)) {
 		ret = PTR_ERR(generic_phy);
@@ -269,6 +339,8 @@  static int qcom_snps_hsphy_probe(struct platform_device *pdev)
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (!IS_ERR(phy_provider))
 		dev_dbg(dev, "Registered Qcom-SNPS HS phy\n");
+	else
+		pm_runtime_disable(dev);
 
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
@@ -277,6 +349,7 @@  static struct platform_driver qcom_snps_hsphy_driver = {
 	.probe		= qcom_snps_hsphy_probe,
 	.driver = {
 		.name	= "qcom-snps-hs-femto-v2-phy",
+		.pm = &qcom_snps_hsphy_pm_ops,
 		.of_match_table = qcom_snps_hsphy_of_match_table,
 	},
 };