diff mbox series

[v2,03/13] clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid

Message ID 20200629172049.30452-4-jonathan@marek.ca (mailing list archive)
State Superseded
Headers show
Series Enable GPU for SM8150 and SM8250 | expand

Commit Message

Jonathan Marek June 29, 2020, 5:20 p.m. UTC 
Fixed ops were already identical, this adds support for non-fixed ops by
sharing between trion and lucid.

This also changes the names for trion ops to be consistent with the rest.

Note LUCID_PCAL_DONE is renamed to TRION_PCAL_DONE because it is wrong for
lucid, LUCID_PCAL_DONE should be BIT(27). Next patch will address this.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/clk-alpha-pll.c | 58 ++++++++++----------------------
 drivers/clk/qcom/clk-alpha-pll.h | 17 ++++++----
 drivers/clk/qcom/gcc-sm8150.c    |  8 ++---
 3 files changed, 32 insertions(+), 51 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 1325139173c9..be7ffeae21b1 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -101,21 +101,6 @@  const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_FRAC] = 0x38,
 	},
 	[CLK_ALPHA_PLL_TYPE_TRION] = {
-		[PLL_OFF_L_VAL] = 0x04,
-		[PLL_OFF_CAL_L_VAL] = 0x08,
-		[PLL_OFF_USER_CTL] = 0x0c,
-		[PLL_OFF_USER_CTL_U] = 0x10,
-		[PLL_OFF_USER_CTL_U1] = 0x14,
-		[PLL_OFF_CONFIG_CTL] = 0x18,
-		[PLL_OFF_CONFIG_CTL_U] = 0x1c,
-		[PLL_OFF_CONFIG_CTL_U1] = 0x20,
-		[PLL_OFF_TEST_CTL] = 0x24,
-		[PLL_OFF_TEST_CTL_U] = 0x28,
-		[PLL_OFF_STATUS] = 0x30,
-		[PLL_OFF_OPMODE] = 0x38,
-		[PLL_OFF_ALPHA_VAL] = 0x40,
-	},
-	[CLK_ALPHA_PLL_TYPE_LUCID] =  {
 		[PLL_OFF_L_VAL] = 0x04,
 		[PLL_OFF_CAL_L_VAL] = 0x08,
 		[PLL_OFF_USER_CTL] = 0x0c,
@@ -154,9 +139,9 @@  EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define PLL_OUT_MASK		0x7
 #define PLL_RATE_MARGIN		500
 
-/* LUCID PLL specific settings and offsets */
-#define LUCID_PLL_CAL_VAL	0x44
-#define LUCID_PCAL_DONE		BIT(26)
+/* TRION PLL specific settings and offsets */
+#define TRION_PLL_CAL_VAL	0x44
+#define TRION_PCAL_DONE		BIT(26)
 
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
@@ -910,14 +895,14 @@  const struct clk_ops clk_alpha_pll_hwfsm_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
 
-const struct clk_ops clk_trion_fixed_pll_ops = {
+const struct clk_ops clk_alpha_pll_fixed_trion_ops = {
 	.enable = clk_trion_pll_enable,
 	.disable = clk_trion_pll_disable,
 	.is_enabled = clk_trion_pll_is_enabled,
 	.recalc_rate = clk_trion_pll_recalc_rate,
 	.round_rate = clk_alpha_pll_round_rate,
 };
-EXPORT_SYMBOL_GPL(clk_trion_fixed_pll_ops);
+EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_trion_ops);
 
 static unsigned long
 clk_alpha_pll_postdiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
@@ -1337,12 +1322,12 @@  clk_trion_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
 				  val << PLL_POST_DIV_SHIFT);
 }
 
-const struct clk_ops clk_trion_pll_postdiv_ops = {
+const struct clk_ops clk_alpha_pll_postdiv_trion_ops = {
 	.recalc_rate = clk_trion_pll_postdiv_recalc_rate,
 	.round_rate = clk_trion_pll_postdiv_round_rate,
 	.set_rate = clk_trion_pll_postdiv_set_rate,
 };
-EXPORT_SYMBOL_GPL(clk_trion_pll_postdiv_ops);
+EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_trion_ops);
 
 static long clk_alpha_pll_postdiv_fabia_round_rate(struct clk_hw *hw,
 				unsigned long rate, unsigned long *prate)
@@ -1397,13 +1382,13 @@  EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_fabia_ops);
  * @regmap: register map
  * @config: configuration to apply for pll
  */
-void clk_lucid_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config)
 {
 	if (config->l)
 		regmap_write(regmap, PLL_L_VAL(pll), config->l);
 
-	regmap_write(regmap, PLL_CAL_L_VAL(pll), LUCID_PLL_CAL_VAL);
+	regmap_write(regmap, PLL_CAL_L_VAL(pll), TRION_PLL_CAL_VAL);
 
 	if (config->alpha)
 		regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
@@ -1456,13 +1441,13 @@  void clk_lucid_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 	/* Place the PLL in STANDBY mode */
 	regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
 }
-EXPORT_SYMBOL_GPL(clk_lucid_pll_configure);
+EXPORT_SYMBOL_GPL(clk_trion_pll_configure);
 
 /*
- * The Lucid PLL requires a power-on self-calibration which happens when the
+ * The TRION PLL requires a power-on self-calibration which happens when the
  * PLL comes out of reset. Calibrate in case it is not completed.
  */
-static int alpha_pll_lucid_prepare(struct clk_hw *hw)
+static int alpha_pll_trion_prepare(struct clk_hw *hw)
 {
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
 	u32 regval;
@@ -1470,7 +1455,7 @@  static int alpha_pll_lucid_prepare(struct clk_hw *hw)
 
 	/* Return early if calibration is not needed. */
 	regmap_read(pll->clkr.regmap, PLL_STATUS(pll), &regval);
-	if (regval & LUCID_PCAL_DONE)
+	if (regval & TRION_PCAL_DONE)
 		return 0;
 
 	/* On/off to calibrate */
@@ -1481,7 +1466,7 @@  static int alpha_pll_lucid_prepare(struct clk_hw *hw)
 	return ret;
 }
 
-static int alpha_pll_lucid_set_rate(struct clk_hw *hw, unsigned long rate,
+static int alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
 				    unsigned long prate)
 {
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
@@ -1535,26 +1520,17 @@  static int alpha_pll_lucid_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-const struct clk_ops clk_alpha_pll_lucid_ops = {
-	.prepare = alpha_pll_lucid_prepare,
+const struct clk_ops clk_alpha_pll_trion_ops = {
+	.prepare = alpha_pll_trion_prepare,
 	.enable = clk_trion_pll_enable,
 	.disable = clk_trion_pll_disable,
 	.is_enabled = clk_trion_pll_is_enabled,
 	.recalc_rate = clk_trion_pll_recalc_rate,
 	.round_rate = clk_alpha_pll_round_rate,
-	.set_rate = alpha_pll_lucid_set_rate,
+	.set_rate = alpha_pll_trion_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_lucid_ops);
 
-const struct clk_ops clk_alpha_pll_fixed_lucid_ops = {
-	.enable = clk_trion_pll_enable,
-	.disable = clk_trion_pll_disable,
-	.is_enabled = clk_trion_pll_is_enabled,
-	.recalc_rate = clk_trion_pll_recalc_rate,
-	.round_rate = clk_alpha_pll_round_rate,
-};
-EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_lucid_ops);
-
 const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
 	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
 	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 704674a153b6..67f1fd271931 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -14,7 +14,7 @@  enum {
 	CLK_ALPHA_PLL_TYPE_BRAMMO,
 	CLK_ALPHA_PLL_TYPE_FABIA,
 	CLK_ALPHA_PLL_TYPE_TRION,
-	CLK_ALPHA_PLL_TYPE_LUCID,
+	CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
@@ -128,18 +128,23 @@  extern const struct clk_ops clk_alpha_pll_fabia_ops;
 extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_fabia_ops;
 
-extern const struct clk_ops clk_alpha_pll_lucid_ops;
-extern const struct clk_ops clk_alpha_pll_fixed_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_trion_ops;
+extern const struct clk_ops clk_alpha_pll_fixed_trion_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_trion_ops;
+
+#define clk_alpha_pll_lucid_ops clk_alpha_pll_trion_ops
+#define clk_alpha_pll_fixed_lucid_ops clk_alpha_pll_fixed_trion_ops
 extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
 
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
 void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 				const struct alpha_pll_config *config);
-void clk_lucid_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
+#define clk_lucid_pll_configure(pll, regmap, config) \
+	clk_trion_pll_configure(pll, regmap, config)
+
 
-extern const struct clk_ops clk_trion_fixed_pll_ops;
-extern const struct clk_ops clk_trion_pll_postdiv_ops;
 
 #endif
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 55e9d6d75a0c..d7778def37da 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -53,7 +53,7 @@  static struct clk_alpha_pll gpll0 = {
 				.name = "bi_tcxo",
 			},
 			.num_parents = 1,
-			.ops = &clk_trion_fixed_pll_ops,
+			.ops = &clk_alpha_pll_fixed_trion_ops,
 		},
 	},
 };
@@ -79,7 +79,7 @@  static struct clk_alpha_pll_postdiv gpll0_out_even = {
 			.hw = &gpll0.clkr.hw,
 		},
 		.num_parents = 1,
-		.ops = &clk_trion_pll_postdiv_ops,
+		.ops = &clk_alpha_pll_postdiv_trion_ops,
 	},
 };
 
@@ -98,7 +98,7 @@  static struct clk_alpha_pll gpll7 = {
 				.name = "bi_tcxo",
 			},
 			.num_parents = 1,
-			.ops = &clk_trion_fixed_pll_ops,
+			.ops = &clk_alpha_pll_fixed_trion_ops,
 		},
 	},
 };
@@ -118,7 +118,7 @@  static struct clk_alpha_pll gpll9 = {
 				.name = "bi_tcxo",
 			},
 			.num_parents = 1,
-			.ops = &clk_trion_fixed_pll_ops,
+			.ops = &clk_alpha_pll_fixed_trion_ops,
 		},
 	},
 };