diff mbox series

[RESEND,v2,02/13] clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL

Message ID 20200629211725.2592-3-jonathan@marek.ca (mailing list archive)
State Superseded
Headers show
Series Enable GPU for SM8150 and SM8250 | expand

Commit Message

Jonathan Marek June 29, 2020, 9:17 p.m. UTC 
0x44 isn't a register offset, it is the value that goes into CAL_L_VAL.

Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/clk-alpha-pll.c | 2 --
 1 file changed, 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 9b2dfa08acb2..1325139173c9 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -56,7 +56,6 @@ 
 #define PLL_STATUS(p)		((p)->offset + (p)->regs[PLL_OFF_STATUS])
 #define PLL_OPMODE(p)		((p)->offset + (p)->regs[PLL_OFF_OPMODE])
 #define PLL_FRAC(p)		((p)->offset + (p)->regs[PLL_OFF_FRAC])
-#define PLL_CAL_VAL(p)		((p)->offset + (p)->regs[PLL_OFF_CAL_VAL])
 
 const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 	[CLK_ALPHA_PLL_TYPE_DEFAULT] =  {
@@ -115,7 +114,6 @@  const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_STATUS] = 0x30,
 		[PLL_OFF_OPMODE] = 0x38,
 		[PLL_OFF_ALPHA_VAL] = 0x40,
-		[PLL_OFF_CAL_VAL] = 0x44,
 	},
 	[CLK_ALPHA_PLL_TYPE_LUCID] =  {
 		[PLL_OFF_L_VAL] = 0x04,