[1/2] ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi

Commit Message

Adrian Schmutzler Sept. 2, 2020, 4:51 p.m. UTC

This adds some additional DT labels which are handy when referring
to the nodes in derived DTS(I) files. It will also make the
definitions more consistent, e.g. by adding gsbi2_serial and
gsbi5_serial where we previously "only" had gsbi4_serial defined.

While at it, add missing spaces after some DT labels and remove one
useless empty line.

Signed-off-by: Adrian Schmutzler <[e-mail]>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

Comments

[e-mail] Jan. 22, 2021, 9:40 p.m. UTC | #1

Hello:

This series was applied to qcom/linux.git (refs/heads/for-next):

On Wed,  2 Sep 2020 18:51:58 +0200 you wrote:
> This adds some additional DT labels which are handy when referring
> to the nodes in derived DTS(I) files. It will also make the
> definitions more consistent, e.g. by adding gsbi2_serial and
> gsbi5_serial where we previously "only" had gsbi4_serial defined.
> 
> While at it, add missing spaces after some DT labels and remove one
> useless empty line.
> 
> [...]

Here is the summary with links:
  - [1/2] ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
    https://git.kernel.org/qcom/c/dd1ebbcf7b60
  - [2/2] ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3
    https://git.kernel.org/qcom/c/59595f65b3aa

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index c51481405e7f..c51f9fb4a0eb 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -20,7 +20,7 @@ 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -30,7 +30,7 @@ 
 			qcom,saw = <&saw0>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -67,7 +67,7 @@ 
 			no-map;
 		};
 
-		smem@41000000 {
+		smem: smem@41000000 {
 			reg = <0x41000000 0x200000>;
 			no-map;
 		};
@@ -251,7 +251,7 @@ 
 
 			syscon-tcsr = <&tcsr>;
 
-			serial@12490000 {
+			gsbi2_serial: serial@12490000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x12490000 0x1000>,
 				      <0x12480000 0x1000>;
@@ -273,7 +273,6 @@ 
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-
 		};
 
 		gsbi4: gsbi@16300000 {
@@ -326,7 +325,7 @@ 
 
 			syscon-tcsr = <&tcsr>;
 
-			serial@1a240000 {
+			gsbi5_serial: serial@1a240000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x1a240000 0x1000>,
 				      <0x1a200000 0x1000>;
@@ -397,7 +396,7 @@ 
 			status = "disabled";
 		};
 
-		sata@29000000 {
+		sata: sata@29000000 {
 			compatible = "qcom,ipq806x-ahci", "generic-ahci";
 			reg = <0x29000000 0x180>;
 
@@ -720,7 +719,7 @@ 
 			regulator-always-on;
 		};
 
-		sdcc1bam:dma@12402000 {
+		sdcc1bam: dma@12402000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -730,7 +729,7 @@ 
 			qcom,ee = <0>;
 		};
 
-		sdcc3bam:dma@12182000 {
+		sdcc3bam: dma@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -740,13 +739,13 @@ 
 			qcom,ee = <0>;
 		};
 
-		amba {
+		amba: amba {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
-			sdcc@12400000 {
+			sdcc1: sdcc@12400000 {
 				status          = "disabled";
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -766,7 +765,7 @@ 
 				dma-names = "tx", "rx";
 			};
 
-			sdcc@12180000 {
+			sdcc3: sdcc@12180000 {
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status          = "disabled";