| Message ID | 20201006160516.319830-2-ulf.hansson@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] power: avs: qcom-cpr: Move the driver to the qcom specific drivers | expand |
On Tue 06 Oct 11:05 CDT 2020, Ulf Hansson wrote: > The avs drivers are all SoC specific drivers that doesn't share any code. > Instead they are located in a directory, mostly to keep similar > functionality together. From a maintenance point of view, it makes better > sense to collect SoC specific drivers like these, into the SoC specific > directories. > > Therefore, let's move the qcom-cpr driver to the qcom directory. > > Cc: Niklas Cassel <nks@flawful.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Andy Gross <agross@kernel.org> > Cc: linux-arm-msm@vger.kernel.org > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > MAINTAINERS | 2 +- > drivers/power/avs/Kconfig | 16 ---------------- > drivers/power/avs/Makefile | 1 - > drivers/soc/qcom/Kconfig | 16 ++++++++++++++++ > drivers/soc/qcom/Makefile | 1 + > drivers/{power/avs/qcom-cpr.c => soc/qcom/cpr.c} | 0 > 6 files changed, 18 insertions(+), 18 deletions(-) > rename drivers/{power/avs/qcom-cpr.c => soc/qcom/cpr.c} (100%) > > diff --git a/MAINTAINERS b/MAINTAINERS > index 4f1a56f6efaa..f51dd1944fe6 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -14337,7 +14337,7 @@ L: linux-pm@vger.kernel.org > L: linux-arm-msm@vger.kernel.org > S: Maintained > F: Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > -F: drivers/power/avs/qcom-cpr.c > +F: drivers/soc/qcom/cpr.c > > QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096 > M: Ilia Lin <ilia.lin@kernel.org> > diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig > index cdb4237bfd02..089b6244b716 100644 > --- a/drivers/power/avs/Kconfig > +++ b/drivers/power/avs/Kconfig > @@ -12,22 +12,6 @@ menuconfig POWER_AVS > > Say Y here to enable Adaptive Voltage Scaling class support. > > -config QCOM_CPR > - tristate "QCOM Core Power Reduction (CPR) support" > - depends on POWER_AVS && HAS_IOMEM > - select PM_OPP > - select REGMAP > - help > - Say Y here to enable support for the CPR hardware found on Qualcomm > - SoCs like QCS404. > - > - This driver populates CPU OPPs tables and makes adjustments to the > - tables based on feedback from the CPR hardware. If you want to do > - CPUfrequency scaling say Y here. > - > - To compile this driver as a module, choose M here: the module will > - be called qcom-cpr > - > config ROCKCHIP_IODOMAIN > tristate "Rockchip IO domain support" > depends on POWER_AVS && ARCH_ROCKCHIP && OF > diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile > index 9007d05853e2..a1b8cd453f19 100644 > --- a/drivers/power/avs/Makefile > +++ b/drivers/power/avs/Makefile > @@ -1,4 +1,3 @@ > # SPDX-License-Identifier: GPL-2.0-only > obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o > -obj-$(CONFIG_QCOM_CPR) += qcom-cpr.o > obj-$(CONFIG_ROCKCHIP_IODOMAIN) += rockchip-io-domain.o > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig > index 3dc3e3d61ea3..6a3b69b43ad5 100644 > --- a/drivers/soc/qcom/Kconfig > +++ b/drivers/soc/qcom/Kconfig > @@ -26,6 +26,22 @@ config QCOM_COMMAND_DB > resource on a RPM-hardened platform must use this database to get > SoC specific identifier and information for the shared resources. > > +config QCOM_CPR > + tristate "QCOM Core Power Reduction (CPR) support" > + depends on ARCH_QCOM && HAS_IOMEM > + select PM_OPP > + select REGMAP > + help > + Say Y here to enable support for the CPR hardware found on Qualcomm > + SoCs like QCS404. > + > + This driver populates CPU OPPs tables and makes adjustments to the > + tables based on feedback from the CPR hardware. If you want to do > + CPUfrequency scaling say Y here. > + > + To compile this driver as a module, choose M here: the module will > + be called qcom-cpr > + > config QCOM_GENI_SE > tristate "QCOM GENI Serial Engine Driver" > depends on ARCH_QCOM || COMPILE_TEST > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile > index 93392d9dc7f7..ad675a6593d0 100644 > --- a/drivers/soc/qcom/Makefile > +++ b/drivers/soc/qcom/Makefile > @@ -3,6 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src) > obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o > obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o > obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o > +obj-$(CONFIG_QCOM_CPR) += cpr.o > obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o > obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o > obj-$(CONFIG_QCOM_OCMEM) += ocmem.o > diff --git a/drivers/power/avs/qcom-cpr.c b/drivers/soc/qcom/cpr.c > similarity index 100% > rename from drivers/power/avs/qcom-cpr.c > rename to drivers/soc/qcom/cpr.c > -- > 2.25.1 >
On Tue, Oct 06, 2020 at 06:05:13PM +0200, Ulf Hansson wrote: > The avs drivers are all SoC specific drivers that doesn't share any code. > Instead they are located in a directory, mostly to keep similar > functionality together. From a maintenance point of view, it makes better > sense to collect SoC specific drivers like these, into the SoC specific > directories. > > Therefore, let's move the qcom-cpr driver to the qcom directory. > > Cc: Niklas Cassel <nks@flawful.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Andy Gross <agross@kernel.org> > Cc: linux-arm-msm@vger.kernel.org > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> > --- Acked-by: Niklas Cassel <nks@flawful.org>
diff --git a/MAINTAINERS b/MAINTAINERS index 4f1a56f6efaa..f51dd1944fe6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14337,7 +14337,7 @@ L: linux-pm@vger.kernel.org L: linux-arm-msm@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/power/avs/qcom,cpr.txt -F: drivers/power/avs/qcom-cpr.c +F: drivers/soc/qcom/cpr.c QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096 M: Ilia Lin <ilia.lin@kernel.org> diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig index cdb4237bfd02..089b6244b716 100644 --- a/drivers/power/avs/Kconfig +++ b/drivers/power/avs/Kconfig @@ -12,22 +12,6 @@ menuconfig POWER_AVS Say Y here to enable Adaptive Voltage Scaling class support. -config QCOM_CPR - tristate "QCOM Core Power Reduction (CPR) support" - depends on POWER_AVS && HAS_IOMEM - select PM_OPP - select REGMAP - help - Say Y here to enable support for the CPR hardware found on Qualcomm - SoCs like QCS404. - - This driver populates CPU OPPs tables and makes adjustments to the - tables based on feedback from the CPR hardware. If you want to do - CPUfrequency scaling say Y here. - - To compile this driver as a module, choose M here: the module will - be called qcom-cpr - config ROCKCHIP_IODOMAIN tristate "Rockchip IO domain support" depends on POWER_AVS && ARCH_ROCKCHIP && OF diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile index 9007d05853e2..a1b8cd453f19 100644 --- a/drivers/power/avs/Makefile +++ b/drivers/power/avs/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o -obj-$(CONFIG_QCOM_CPR) += qcom-cpr.o obj-$(CONFIG_ROCKCHIP_IODOMAIN) += rockchip-io-domain.o diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 3dc3e3d61ea3..6a3b69b43ad5 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -26,6 +26,22 @@ config QCOM_COMMAND_DB resource on a RPM-hardened platform must use this database to get SoC specific identifier and information for the shared resources. +config QCOM_CPR + tristate "QCOM Core Power Reduction (CPR) support" + depends on ARCH_QCOM && HAS_IOMEM + select PM_OPP + select REGMAP + help + Say Y here to enable support for the CPR hardware found on Qualcomm + SoCs like QCS404. + + This driver populates CPU OPPs tables and makes adjustments to the + tables based on feedback from the CPR hardware. If you want to do + CPUfrequency scaling say Y here. + + To compile this driver as a module, choose M here: the module will + be called qcom-cpr + config QCOM_GENI_SE tristate "QCOM GENI Serial Engine Driver" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 93392d9dc7f7..ad675a6593d0 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -3,6 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src) obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o +obj-$(CONFIG_QCOM_CPR) += cpr.o obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o obj-$(CONFIG_QCOM_OCMEM) += ocmem.o diff --git a/drivers/power/avs/qcom-cpr.c b/drivers/soc/qcom/cpr.c similarity index 100% rename from drivers/power/avs/qcom-cpr.c rename to drivers/soc/qcom/cpr.c
The avs drivers are all SoC specific drivers that doesn't share any code. Instead they are located in a directory, mostly to keep similar functionality together. From a maintenance point of view, it makes better sense to collect SoC specific drivers like these, into the SoC specific directories. Therefore, let's move the qcom-cpr driver to the qcom directory. Cc: Niklas Cassel <nks@flawful.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- MAINTAINERS | 2 +- drivers/power/avs/Kconfig | 16 ---------------- drivers/power/avs/Makefile | 1 - drivers/soc/qcom/Kconfig | 16 ++++++++++++++++ drivers/soc/qcom/Makefile | 1 + drivers/{power/avs/qcom-cpr.c => soc/qcom/cpr.c} | 0 6 files changed, 18 insertions(+), 18 deletions(-) rename drivers/{power/avs/qcom-cpr.c => soc/qcom/cpr.c} (100%)