diff mbox series

[5/6] dts:qcom:sdm845: Add dt entries to support crypto engine.

Message ID 20201117134714.3456446-6-thara.gopinath@linaro.org (mailing list archive)
State Superseded
Headers show
Series Enable Qualcomm Crypto Engine on sdm845 | expand

Commit Message

Thara Gopinath Nov. 17, 2020, 1:47 p.m. UTC
Add crypto engine (CE) and CE BAM related nodes and definitions to
"sdm845.dtsi".

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 30 ++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Comments

Bjorn Andersson Nov. 18, 2020, 4:10 a.m. UTC | #1
On Tue 17 Nov 07:47 CST 2020, Thara Gopinath wrote:

> Add crypto engine (CE) and CE BAM related nodes and definitions to
> "sdm845.dtsi".
> 
> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 30 ++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 40e8c11f23ab..b5b2ea97681f 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2138,6 +2138,36 @@ ufs_mem_phy_lanes: lanes@1d87400 {
>  			};
>  		};
>  
> +		cryptobam: dma@1dc4000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0 0x01dc4000 0 0x24000>;
> +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rpmhcc RPMH_CE_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +			qcom,controlled-remotely = <1>;
> +			iommus = <&apps_smmu 0x704 0x1>,
> +				 <&apps_smmu 0x706 0x1>,
> +				 <&apps_smmu 0x714 0x1>,
> +				 <&apps_smmu 0x716 0x1>;

Can you confirm that this can't be written as:

iommus = <&apps_smmu 0x704 0x3>,
	 <&apps_smmu 0x714 0x3>;

(and same below).

Regards,
Bjorn
> +		};
> +
> +		crypto: crypto@1dfa000 {
> +			compatible = "qcom,crypto-v5.4";
> +			reg = <0 0x01dfa000 0 0x6000>;
> +			clocks = <&gcc GCC_CE1_AHB_CLK>,
> +				 <&gcc GCC_CE1_AHB_CLK>,
> +				 <&rpmhcc RPMH_CE_CLK>;
> +			clock-names = "iface", "bus", "core";
> +			dmas = <&cryptobam 6>, <&cryptobam 7>;
> +			dma-names = "rx", "tx";
> +			iommus = <&apps_smmu 0x704 0x1>,
> +				 <&apps_smmu 0x706 0x1>,
> +				 <&apps_smmu 0x714 0x1>,
> +				 <&apps_smmu 0x716 0x1>;
> +		};
> +
>  		ipa: ipa@1e40000 {
>  			compatible = "qcom,sdm845-ipa";
>  
> -- 
> 2.25.1
>
Thara Gopinath Nov. 18, 2020, 7:58 p.m. UTC | #2
On 11/17/20 11:10 PM, Bjorn Andersson wrote:
> On Tue 17 Nov 07:47 CST 2020, Thara Gopinath wrote:
> 
>> Add crypto engine (CE) and CE BAM related nodes and definitions to
>> "sdm845.dtsi".
>>
>> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sdm845.dtsi | 30 ++++++++++++++++++++++++++++
>>   1 file changed, 30 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index 40e8c11f23ab..b5b2ea97681f 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -2138,6 +2138,36 @@ ufs_mem_phy_lanes: lanes@1d87400 {
>>   			};
>>   		};
>>   
>> +		cryptobam: dma@1dc4000 {
>> +			compatible = "qcom,bam-v1.7.0";
>> +			reg = <0 0x01dc4000 0 0x24000>;
>> +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&rpmhcc RPMH_CE_CLK>;
>> +			clock-names = "bam_clk";
>> +			#dma-cells = <1>;
>> +			qcom,ee = <0>;
>> +			qcom,controlled-remotely = <1>;
>> +			iommus = <&apps_smmu 0x704 0x1>,
>> +				 <&apps_smmu 0x706 0x1>,
>> +				 <&apps_smmu 0x714 0x1>,
>> +				 <&apps_smmu 0x716 0x1>;
> 
> Can you confirm that this can't be written as:
> 
> iommus = <&apps_smmu 0x704 0x3>,
> 	 <&apps_smmu 0x714 0x3>;
> 
> (and same below).

Hi Bjorn,

Thanks for the reviews. Yes, I can confirm that the above does not work.
The tests hang. I will fix rest of your comments and post v2.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 40e8c11f23ab..b5b2ea97681f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2138,6 +2138,36 @@  ufs_mem_phy_lanes: lanes@1d87400 {
 			};
 		};
 
+		cryptobam: dma@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_CE_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely = <1>;
+			iommus = <&apps_smmu 0x704 0x1>,
+				 <&apps_smmu 0x706 0x1>,
+				 <&apps_smmu 0x714 0x1>,
+				 <&apps_smmu 0x716 0x1>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,crypto-v5.4";
+			reg = <0 0x01dfa000 0 0x6000>;
+			clocks = <&gcc GCC_CE1_AHB_CLK>,
+				 <&gcc GCC_CE1_AHB_CLK>,
+				 <&rpmhcc RPMH_CE_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x704 0x1>,
+				 <&apps_smmu 0x706 0x1>,
+				 <&apps_smmu 0x714 0x1>,
+				 <&apps_smmu 0x716 0x1>;
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sdm845-ipa";