diff mbox series

[v2,5/7] drm/msm/dpu: Disable autorefresh in command mode

Message ID 20210112192632.502897-6-angelogioacchino.delregno@somainline.org (mailing list archive)
State Accepted
Commit aa9223a602544fea033b63e1b1d6c8d9eaa4ed43
Headers show
Series Qualcomm DRM DPU fixes | expand

Commit Message

AngeloGioacchino Del Regno Jan. 12, 2021, 7:26 p.m. UTC
When a command mode display is used, it may be retaining the bootloader
configuration which, in most of the cases, enables the autorefresh
feature in order to keep the splash up.

Since there is no autorefresh management in this driver, wire up the
autorefresh ops in the dpu_hw_pingpong and disable the feature when
preparing for cmd commit: instead of disabling it when initializing
the command mode, this road was chosen as to open future possibility
of enabling and managing the autorefresh feature in the driver.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c  | 68 +++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 26 +++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++++
 3 files changed, 108 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 5a056c1191df..4d3481baaead 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -4,8 +4,10 @@ 
  */
 
 #define pr_fmt(fmt)	"[drm:%s:%d] " fmt, __func__, __LINE__
+#include <linux/delay.h>
 #include "dpu_encoder_phys.h"
 #include "dpu_hw_interrupts.h"
+#include "dpu_hw_pingpong.h"
 #include "dpu_core_irq.h"
 #include "dpu_formats.h"
 #include "dpu_trace.h"
@@ -35,6 +37,8 @@ 
 
 #define DPU_ENC_WR_PTR_START_TIMEOUT_US 20000
 
+#define DPU_ENC_MAX_POLL_TIMEOUT_US	2000
+
 static bool dpu_encoder_phys_cmd_is_master(struct dpu_encoder_phys *phys_enc)
 {
 	return (phys_enc->split_role != ENC_ROLE_SLAVE) ? true : false;
@@ -580,6 +584,69 @@  static void dpu_encoder_phys_cmd_prepare_for_kickoff(
 			atomic_read(&phys_enc->pending_kickoff_cnt));
 }
 
+static bool dpu_encoder_phys_cmd_is_ongoing_pptx(
+		struct dpu_encoder_phys *phys_enc)
+{
+	struct dpu_hw_pp_vsync_info info;
+
+	if (!phys_enc)
+		return false;
+
+	phys_enc->hw_pp->ops.get_vsync_info(phys_enc->hw_pp, &info);
+	if (info.wr_ptr_line_count > 0 &&
+	    info.wr_ptr_line_count < phys_enc->cached_mode.vdisplay)
+		return true;
+
+	return false;
+}
+
+static void dpu_encoder_phys_cmd_prepare_commit(
+		struct dpu_encoder_phys *phys_enc)
+{
+	struct dpu_encoder_phys_cmd *cmd_enc =
+		to_dpu_encoder_phys_cmd(phys_enc);
+	int trial = 0;
+
+	if (!phys_enc)
+		return;
+	if (!phys_enc->hw_pp)
+		return;
+	if (!dpu_encoder_phys_cmd_is_master(phys_enc))
+		return;
+
+	/* If autorefresh is already disabled, we have nothing to do */
+	if (!phys_enc->hw_pp->ops.get_autorefresh(phys_enc->hw_pp, NULL))
+		return;
+
+	/*
+	 * If autorefresh is enabled, disable it and make sure it is safe to
+	 * proceed with current frame commit/push. Sequence fallowed is,
+	 * 1. Disable TE
+	 * 2. Disable autorefresh config
+	 * 4. Poll for frame transfer ongoing to be false
+	 * 5. Enable TE back
+	 */
+	_dpu_encoder_phys_cmd_connect_te(phys_enc, false);
+	phys_enc->hw_pp->ops.setup_autorefresh(phys_enc->hw_pp, 0, false);
+
+	do {
+		udelay(DPU_ENC_MAX_POLL_TIMEOUT_US);
+		if ((trial * DPU_ENC_MAX_POLL_TIMEOUT_US)
+				> (KICKOFF_TIMEOUT_MS * USEC_PER_MSEC)) {
+			DPU_ERROR_CMDENC(cmd_enc,
+					"disable autorefresh failed\n");
+			break;
+		}
+
+		trial++;
+	} while (dpu_encoder_phys_cmd_is_ongoing_pptx(phys_enc));
+
+	_dpu_encoder_phys_cmd_connect_te(phys_enc, true);
+
+	DPU_DEBUG_CMDENC(to_dpu_encoder_phys_cmd(phys_enc),
+			 "disabled autorefresh\n");
+}
+
 static int _dpu_encoder_phys_cmd_wait_for_ctl_start(
 		struct dpu_encoder_phys *phys_enc)
 {
@@ -681,6 +748,7 @@  static void dpu_encoder_phys_cmd_trigger_start(
 static void dpu_encoder_phys_cmd_init_ops(
 		struct dpu_encoder_phys_ops *ops)
 {
+	ops->prepare_commit = dpu_encoder_phys_cmd_prepare_commit;
 	ops->is_master = dpu_encoder_phys_cmd_is_master;
 	ops->mode_set = dpu_encoder_phys_cmd_mode_set;
 	ops->mode_fixup = dpu_encoder_phys_cmd_mode_fixup;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
index bea4ab5c58c5..245a7a62b5c6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
@@ -23,6 +23,7 @@ 
 #define PP_WR_PTR_IRQ                   0x024
 #define PP_OUT_LINE_COUNT               0x028
 #define PP_LINE_COUNT                   0x02C
+#define PP_AUTOREFRESH_CONFIG           0x030
 
 #define PP_FBC_MODE                     0x034
 #define PP_FBC_BUDGET_CTL               0x038
@@ -120,6 +121,29 @@  static int dpu_hw_pp_setup_te_config(struct dpu_hw_pingpong *pp,
 	return 0;
 }
 
+static void dpu_hw_pp_setup_autorefresh_config(struct dpu_hw_pingpong *pp,
+					       u32 frame_count, bool enable)
+{
+	DPU_REG_WRITE(&pp->hw, PP_AUTOREFRESH_CONFIG,
+		      enable ? (BIT(31) | frame_count) : 0);
+}
+
+/*
+ * dpu_hw_pp_get_autorefresh_config - Get autorefresh config from HW
+ * @pp:          DPU pingpong structure
+ * @frame_count: Used to return the current frame count from hw
+ *
+ * Returns: True if autorefresh enabled, false if disabled.
+ */
+static bool dpu_hw_pp_get_autorefresh_config(struct dpu_hw_pingpong *pp,
+					     u32 *frame_count)
+{
+	u32 val = DPU_REG_READ(&pp->hw, PP_AUTOREFRESH_CONFIG);
+	if (frame_count != NULL)
+		*frame_count = val & 0xffff;
+	return !!((val & BIT(31)) >> 31);
+}
+
 static int dpu_hw_pp_poll_timeout_wr_ptr(struct dpu_hw_pingpong *pp,
 		u32 timeout_us)
 {
@@ -228,6 +252,8 @@  static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
 	c->ops.enable_tearcheck = dpu_hw_pp_enable_te;
 	c->ops.connect_external_te = dpu_hw_pp_connect_external_te;
 	c->ops.get_vsync_info = dpu_hw_pp_get_vsync_info;
+	c->ops.setup_autorefresh = dpu_hw_pp_setup_autorefresh_config;
+	c->ops.get_autorefresh = dpu_hw_pp_get_autorefresh_config;
 	c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
 	c->ops.get_line_count = dpu_hw_pp_get_line_count;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
index 6902b9b95c8e..845b9ce80e31 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
@@ -63,6 +63,8 @@  struct dpu_hw_dither_cfg {
  *  @setup_tearcheck : program tear check values
  *  @enable_tearcheck : enables tear check
  *  @get_vsync_info : retries timing info of the panel
+ *  @setup_autorefresh : configure and enable the autorefresh config
+ *  @get_autorefresh : retrieve autorefresh config from hardware
  *  @setup_dither : function to program the dither hw block
  *  @get_line_count: obtain current vertical line counter
  */
@@ -94,6 +96,18 @@  struct dpu_hw_pingpong_ops {
 	int (*get_vsync_info)(struct dpu_hw_pingpong *pp,
 			struct dpu_hw_pp_vsync_info  *info);
 
+	/**
+	 * configure and enable the autorefresh config
+	 */
+	void (*setup_autorefresh)(struct dpu_hw_pingpong *pp,
+				  u32 frame_count, bool enable);
+
+	/**
+	 * retrieve autorefresh config from hardware
+	 */
+	bool (*get_autorefresh)(struct dpu_hw_pingpong *pp,
+				u32 *frame_count);
+
 	/**
 	 * poll until write pointer transmission starts
 	 * @Return: 0 on success, -ETIMEDOUT on timeout