@@ -593,6 +593,82 @@ rpmhcc: clock-controller {
};
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc 25>;
+ reset-names = "rst";
+
+ power-domains = <&gcc 3>;
+
+ iommus = <&apps_smmu 0xe0 0x0>;
+
+ clock-names =
+ "ref_clk",
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc 155>,
+ <&gcc 16>,
+ <&gcc 154>,
+ <&gcc 170>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc 168>,
+ <&gcc 164>,
+ <&gcc 166>;
+ freq-table-hz =
+ <75000000 300000000>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <75000000 300000000>;
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sm8350-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0xe10>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #clock-cells = <1>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc 161>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufs_mem_phy_lanes: lanes@1d87400 {
+ reg = <0 0x01d87400 0 0x108>,
+ <0 0x01d87600 0 0x1e0>,
+ <0 0x01d87c00 0 0x1dc>,
+ <0 0x01d87800 0 0x108>,
+ <0 0x01d87a00 0 0x1e0>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ };
+ };
+
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8350-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
This adds UFS HC and UFS phy nodes to the SM8350 DTS Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 76 ++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+)