diff mbox series

[6/7] arm64: dts: qcom: sm8350-mtp: Enable remoteprocs

Message ID 20210212115532.1339942-7-vkoul@kernel.org (mailing list archive)
State Accepted
Headers show
Series arm64: dts: qcom: sm8350: additional device support | expand

Commit Message

Vinod Koul Feb. 12, 2021, 11:55 a.m. UTC 
This enabled the four remoteprocs found in SM8350, audio, compute, modem
and sensor for MTP platform and adds firmware for them.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
index e544fe6b421f..98a517edd442 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -32,6 +32,11 @@  vph_pwr: vph-pwr-regulator {
 	};
 };
 
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/adsp.mbn";
+};
+
 &apps_rsc {
 	pm8350-rpmh-regulators {
 		compatible = "qcom,pm8350-rpmh-regulators";
@@ -265,10 +270,25 @@  vreg_l13c_3p0: ldo13 {
 	};
 };
 
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/cdsp.mbn";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/modem.mbn";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
 
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/slpi.mbn";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <52 8>;
 };