@@ -577,12 +577,26 @@ gcc: clock-controller@100000 {
<&sleep_clk>;
};
+ qupv3_id_0: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x008c0000 0x0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ iommus = <&apps_smmu 0xc3 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x603 0x0>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -598,6 +612,20 @@ uart2: serial@a90000 {
};
};
+ qupv3_id_2: geniqup@cc0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x00cc0000 0x0 0x6000>;
+
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x7a3 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ };
+
config_noc: interconnect@1500000 {
compatible = "qcom,sm8150-config-noc";
reg = <0 0x01500000 0 0x7400>;
Add the first and third qupv3 nodes used to hook up peripherals on some devices, as well as the iommus properties for all of them. Signed-off-by: Caleb Connolly <caleb@connolly.tech> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)