| Message ID | 20210708120656.663851-6-thara.gopinath@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introduce LMh driver for Qualcomm SoCs | expand |
On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote: > Now that Limits h/w is enabled to monitor thermal events around cpus and > throttle the cpu frequencies, remove cpufreq cooling device for the CPU > thermal zones which does software throttling of cpu frequencies. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> > --- > > v2->v3: > - Improved the subject header and descrption to better reflect the > patch as per Matthias's review comments. > > v1->v2: > Removing only cooling maps for cpu specific thermal zones keeping the > trip point definitions intact as per Daniel's suggestion. This is to > ensure that thermal zone temparature and trip violation information is > available to any userspace daemon monitoring these zones. > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 136 --------------------------- > 1 file changed, 136 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 4da6b8f3dd7b..6185fff8859a 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -4994,23 +4994,6 @@ cpu0_crit: cpu_crit { > type = "critical"; > }; > }; > - > - cooling-maps { > - map0 { > - trip = <&cpu0_alert0>; > - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - map1 { > - trip = <&cpu0_alert1>; > - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > }; > > cpu1-thermal { > @@ -5038,23 +5021,6 @@ cpu1_crit: cpu_crit { > type = "critical"; > }; > }; > - > - cooling-maps { > - map0 { > - trip = <&cpu1_alert0>; > - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - map1 { > - trip = <&cpu1_alert1>; > - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > }; > > cpu2-thermal { > @@ -5082,23 +5048,6 @@ cpu2_crit: cpu_crit { > type = "critical"; > }; > }; > - > - cooling-maps { > - map0 { > - trip = <&cpu2_alert0>; > - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - map1 { > - trip = <&cpu2_alert1>; > - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > }; > > cpu3-thermal { > @@ -5126,23 +5075,6 @@ cpu3_crit: cpu_crit { > type = "critical"; > }; > }; > - > - cooling-maps { > - map0 { > - trip = <&cpu3_alert0>; > - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - map1 { > - trip = <&cpu3_alert1>; > - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > }; > > cpu4-thermal { > @@ -5170,23 +5102,6 @@ cpu4_crit: cpu_crit { > type = "critical"; > }; > }; > - > - cooling-maps { > - map0 { > - trip = <&cpu4_alert0>; > - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - map1 { > - trip = <&cpu4_alert1>; > - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > }; > > cpu5-thermal { > @@ -5214,23 +5129,6 @@ cpu5_crit: cpu_crit { > type = "critical"; > }; > }; > - > - cooling-maps { > - map0 { > - trip = <&cpu5_alert0>; > - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - map1 { > - trip = <&cpu5_alert1>; > - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > }; > > cpu6-thermal { > @@ -5258,23 +5156,6 @@ cpu6_crit: cpu_crit { > type = "critical"; > }; > }; > - > - cooling-maps { > - map0 { > - trip = <&cpu6_alert0>; > - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - map1 { > - trip = <&cpu6_alert1>; > - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > }; > > cpu7-thermal { > @@ -5302,23 +5183,6 @@ cpu7_crit: cpu_crit { > type = "critical"; > }; > }; > - > - cooling-maps { > - map0 { > - trip = <&cpu7_alert0>; > - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - map1 { > - trip = <&cpu7_alert1>; > - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > - }; > - }; > }; > > aoss0-thermal { > -- > 2.25.1 >
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 4da6b8f3dd7b..6185fff8859a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4994,23 +4994,6 @@ cpu0_crit: cpu_crit { type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu1-thermal { @@ -5038,23 +5021,6 @@ cpu1_crit: cpu_crit { type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu2-thermal { @@ -5082,23 +5048,6 @@ cpu2_crit: cpu_crit { type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu3-thermal { @@ -5126,23 +5075,6 @@ cpu3_crit: cpu_crit { type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu4-thermal { @@ -5170,23 +5102,6 @@ cpu4_crit: cpu_crit { type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu4_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu4_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu5-thermal { @@ -5214,23 +5129,6 @@ cpu5_crit: cpu_crit { type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu5_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu5_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu6-thermal { @@ -5258,23 +5156,6 @@ cpu6_crit: cpu_crit { type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu6_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu6_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu7-thermal { @@ -5302,23 +5183,6 @@ cpu7_crit: cpu_crit { type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu7_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu7_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; aoss0-thermal {
Now that Limits h/w is enabled to monitor thermal events around cpus and throttle the cpu frequencies, remove cpufreq cooling device for the CPU thermal zones which does software throttling of cpu frequencies. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> --- v2->v3: - Improved the subject header and descrption to better reflect the patch as per Matthias's review comments. v1->v2: Removing only cooling maps for cpu specific thermal zones keeping the trip point definitions intact as per Daniel's suggestion. This is to ensure that thermal zone temparature and trip violation information is available to any userspace daemon monitoring these zones. arch/arm64/boot/dts/qcom/sdm845.dtsi | 136 --------------------------- 1 file changed, 136 deletions(-)