| Message ID | 20210906202552.824598-1-marijn.suijten@somainline.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready | expand |
On 06/09/2021 23:25, Marijn Suijten wrote: > The downstream driver models this PLL lock check as an if-elseif-else. > The only way to reach the else case where pll_locked=true [1] is by > succeeding both readl_poll_timeout_atomic calls (which return zero on > success) in the if _and_ elseif condition. Hence both the "lock" and > "ready" bit need to be tested in the SM_READY_STATUS register before > considering the PLL locked and ready to go. > > Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). > > [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302 > > Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 30 +++++++++++----------- > 1 file changed, 15 insertions(+), 15 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > index 8905f365c932..789b08c24d25 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > @@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; > static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, > u32 nb_tries, u32 timeout_us) > { > - bool pll_locked = false; > + bool pll_locked = false, pll_ready = false; > void __iomem *base = pll_14nm->phy->pll_base; > u32 tries, val; > > tries = nb_tries; > while (tries--) { > - val = dsi_phy_read(base + > - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); > + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); > pll_locked = !!(val & BIT(5)); > > if (pll_locked) > @@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, > udelay(timeout_us); > } > > - if (!pll_locked) { > - tries = nb_tries; > - while (tries--) { > - val = dsi_phy_read(base + > - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); > - pll_locked = !!(val & BIT(0)); > + if (!pll_locked) > + goto out; > > - if (pll_locked) > - break; > + tries = nb_tries; > + while (tries--) { > + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); > + pll_ready = !!(val & BIT(0)); > > - udelay(timeout_us); > - } > + if (pll_ready) > + break; > + > + udelay(timeout_us); > } > > - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); > +out: > + DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* "); > > - return pll_locked; > + return pll_locked && pll_ready; > } > > static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf) >
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 8905f365c932..789b08c24d25 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, u32 nb_tries, u32 timeout_us) { - bool pll_locked = false; + bool pll_locked = false, pll_ready = false; void __iomem *base = pll_14nm->phy->pll_base; u32 tries, val; tries = nb_tries; while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); pll_locked = !!(val & BIT(5)); if (pll_locked) @@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, udelay(timeout_us); } - if (!pll_locked) { - tries = nb_tries; - while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); - pll_locked = !!(val & BIT(0)); + if (!pll_locked) + goto out; - if (pll_locked) - break; + tries = nb_tries; + while (tries--) { + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + pll_ready = !!(val & BIT(0)); - udelay(timeout_us); - } + if (pll_ready) + break; + + udelay(timeout_us); } - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); +out: + DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* "); - return pll_locked; + return pll_locked && pll_ready; } static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)
The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302 Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 30 +++++++++++----------- 1 file changed, 15 insertions(+), 15 deletions(-)