@@ -1839,6 +1839,101 @@
#sound-dai-cells = <1>;
};
+ rxmacro: rxmacro@3200000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rx_swr_active>;
+ compatible = "qcom,sm8250-lpass-rx-macro";
+ reg = <0 0x3200000 0 0x1000>;
+
+ clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&vamacro>;
+
+ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ swr1: soundwire-controller@3210000 {
+ reg = <0 0x3210000 0 0x2000>;
+ compatible = "qcom,soundwire-v1.5.1";
+ interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rxmacro>;
+ clock-names = "iface";
+ label = "RX";
+ qcom,din-ports = <0>;
+ qcom,dout-ports = <5>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>;
+ qcom,ports-hstop = /bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>;
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+ qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ txmacro: txmacro@3220000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tx_swr_active>;
+ compatible = "qcom,sm8250-lpass-tx-macro";
+ reg = <0 0x3220000 0 0x1000>;
+
+ clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&vamacro>;
+
+ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #sound-dai-cells = <1>;
+ };
+
+ /* tx macro */
+ swr2: soundwire-controller@3230000 {
+ reg = <0 0x3230000 0 0x2000>;
+ compatible = "qcom,soundwire-v1.5.1";
+ interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "core";
+
+ clocks = <&txmacro>;
+ clock-names = "iface";
+ label = "TX";
+
+ qcom,din-ports = <5>;
+ qcom,dout-ports = <0>;
+ qcom,ports-sinterval-low = /bits/ 8 <0xFF 0x01 0x01 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0xFF 0x01 0x00 0x02 0x00>;
+ qcom,ports-offset2 = /bits/ 8 <0xFF 0x00 0x00 0x00 0x00>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+ qcom,ports-hstart = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+ qcom,ports-hstop = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+ qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+ qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+ qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>;
+ qcom,port-offset = <1>;
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
aoncc: clock-controller@3380000 {
compatible = "qcom,sm8250-lpass-aoncc";
reg = <0 0x03380000 0 0x40000>;
@@ -1931,6 +2026,68 @@
input-enable;
};
};
+
+ rx_swr_active: rx_swr-active-pins {
+ clk {
+ pins = "gpio3";
+ function = "swr_rx_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data {
+ pins = "gpio4", "gpio5";
+ function = "swr_rx_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+
+ tx_swr_active: tx_swr-active-pins {
+ clk {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data {
+ pins = "gpio1", "gpio2";
+ function = "swr_tx_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+
+ tx_swr_sleep: tx_swr-sleep-pins {
+ clk {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ input-enable;
+ bias-pull-down;
+ };
+
+ data1 {
+ pins = "gpio1";
+ function = "swr_tx_data";
+ drive-strength = <2>;
+ input-enable;
+ bias-bus-hold;
+ };
+
+ data2 {
+ pins = "gpio2";
+ function = "swr_tx_data";
+ drive-strength = <2>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
};
gpu: gpu@3d00000 {
SM8250 has TX and RX macros with SoundWire Controllers to attach with codecs like WCD938x. Add these nodes for sm8250 mtp audio use case. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 157 +++++++++++++++++++++++++++ 1 file changed, 157 insertions(+)