diff mbox series

[v2,06/11] arm64: dts: qcom: Add PM6350 PMIC

Message ID 20211007212444.328034-7-luca@z3ntu.xyz (mailing list archive)
State Accepted
Headers show
Series Initial Fairphone 4 support | expand

Commit Message

Luca Weiss Oct. 7, 2021, 9:24 p.m. UTC 
PM6350 is used in SM6350 and provides similar functionality to other
Qualcomm PMICs.

Add the pon node with power & volume key and the gpios.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
v2: add R-b

 arch/arm64/boot/dts/qcom/pm6350.dtsi | 54 ++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6350.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi
new file mode 100644
index 000000000000..c5d85064562b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -0,0 +1,54 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm6350", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6350_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm6350_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm6350_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm6350_gpios: gpios@c000 {
+			compatible = "qcom,pm6350-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm6350", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};