diff mbox series

[v4,03/20] arm64/dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node

Message ID 20211013105541.68045-4-bhupesh.sharma@linaro.org (mailing list archive)
State Accepted
Headers show
Series Enable Qualcomm Crypto Engine on sm8250 | expand

Commit Message

Bhupesh Sharma Oct. 13, 2021, 10:55 a.m. UTC 
'iface_clk' clock is not used by the
qcom, bam_dma driver, so remove the same from 'ipq6018' dts.

This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.

Without this change, 'make dtbs_check' leads to the following
error:
 $ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
     dma-controller@7984000: clock-names: ['iface_clk', 'bam_clk']
     is too long

Fix the same.

Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 6a05ee82547f..55c961b5f1ab 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -346,9 +346,8 @@  qpic_bam: dma-controller@7984000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07984000 0x0 0x1a000>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_QPIC_CLK>,
-				 <&gcc GCC_QPIC_AHB_CLK>;
-			clock-names = "iface_clk", "bam_clk";
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
 			status = "disabled";