diff mbox series

[v2,2/2] wcn36xx: add missing 5GHz channels 136 and 144

Message ID 20211025175359.3591048-3-benl@squareup.com (mailing list archive)
State Not Applicable
Headers show
Series wcn36xx: add missing 5GHz channels 136 and 144 | expand

Commit Message

Benjamin Li Oct. 25, 2021, 5:53 p.m. UTC 
The official feature-complete WCN3680B driver (known as prima, open source
but not upstream) supports channels 136 and 144.

However, these channels are missing in upstream. Add them here to get
closer to feature parity with prima.

Signed-off-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 2 ++
 drivers/net/wireless/ath/wcn36xx/smd.c  | 1 +
 2 files changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 263af65a889ab..13d09c66ae921 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -85,7 +85,9 @@  static struct ieee80211_channel wcn_5ghz_channels[] = {
 	CHAN5G(5620, 124, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
 	CHAN5G(5640, 128, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
 	CHAN5G(5660, 132, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
+	CHAN5G(5680, 136, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
 	CHAN5G(5700, 140, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
+	CHAN5G(5720, 144, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH),
 	CHAN5G(5745, 149, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW),
 	CHAN5G(5765, 153, PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW),
 	CHAN5G(5785, 157, PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH),
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index be6442b3c80b1..9785327593d26 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2396,6 +2396,7 @@  int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn)
 	set_feat_caps(msg_body.feat_caps, STA_POWERSAVE);
 	if (wcn->rf_id == RF_IRIS_WCN3680) {
 		set_feat_caps(msg_body.feat_caps, DOT11AC);
+		set_feat_caps(msg_body.feat_caps, WLAN_CH144);
 		set_feat_caps(msg_body.feat_caps, ANTENNA_DIVERSITY_SELECTION);
 	}