diff mbox series

[RFC,v2,1/4] arm64: dts: qcom: sm8150: add dispcc node

Message ID 20211113023955.105989-2-kaperez@linux.microsoft.com (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo | expand

Commit Message

Katherine Perez Nov. 13, 2021, 2:39 a.m. UTC 
Add the display clock controller node to sm8150.

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---

Changes since v1:
- Picked up Konrad's Reviewed-by

 arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

--
2.31.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 81b4ff2cc4cd..ee40af469fab 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -9,6 +9,7 @@ 
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -3260,6 +3261,30 @@  camnoc_virt: interconnect@ac00000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};

+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8150-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sm8150-aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;