| Message ID | 20211122235230.2467246-1-jm5112356@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: qcom: pm8226: Add PON node | expand |
Hi Jack, On Dienstag, 23. November 2021 00:52:30 CEST Jack Matthews wrote: > Add PON node with pwrkey and resin as child nodes. > Also adds resin, and additional properties to pwrkey. I just saw that this patch hasn't been applied yet. As it doesn't apply cleanly anymore can you please rebase it and send a v2? Hopefully Bjorn can apply it then :) Regards Luca > > Signed-off-by: Jack Matthews <jm5112356@gmail.com> > --- > arch/arm/boot/dts/qcom-pm8226.dtsi | 27 +++++++++++++++++++++------ > 1 file changed, 21 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi > b/arch/arm/boot/dts/qcom-pm8226.dtsi index 666bc6350c50..63f3026c25bf > 100644 > --- a/arch/arm/boot/dts/qcom-pm8226.dtsi > +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi > @@ -1,5 +1,6 @@ > // SPDX-License-Identifier: BSD-3-Clause > #include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/input/input.h> > #include <dt-bindings/spmi/spmi.h> > > &spmi_bus { > @@ -9,12 +10,26 @@ pm8226_0: pm8226@0 { > #address-cells = <1>; > #size-cells = <0>; > > - pwrkey@800 { > - compatible = "qcom,pm8941-pwrkey"; > - reg = <0x800>; > - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > - debounce = <15625>; > - bias-pull-up; > + pon: power-on@800 { > + compatible = "qcom,pm8916-pon"; > + reg = <0x0800>; > + > + pm8226_pwrkey: pwrkey { > + compatible = "qcom,pm8941- pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_POWER>; > + }; > + > + pm8226_resin: resin { > + compatible = "qcom,pm8941-resin"; > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + > + status = "disabled"; > + }; > }; > > smbb: charger@1000 {
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi index 666bc6350c50..63f3026c25bf 100644 --- a/arch/arm/boot/dts/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -9,12 +10,26 @@ pm8226_0: pm8226@0 { #address-cells = <1>; #size-cells = <0>; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; - reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + pm8226_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm8226_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + + status = "disabled"; + }; }; smbb: charger@1000 {
Add PON node with pwrkey and resin as child nodes. Also adds resin, and additional properties to pwrkey. Signed-off-by: Jack Matthews <jm5112356@gmail.com> --- arch/arm/boot/dts/qcom-pm8226.dtsi | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-)