Message ID | 20211123181119.2897-1-dominikkobinski314@gmail.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | [1/4] pinctrl: qcom: spmi-gpio: Add pm8226 compatibility | expand |
On Tue 23 Nov 10:11 PST 2021, Dominik Kobinski wrote: > The PM8226 PMIC is very often seen on > MSM8x26 boards. The appropriate width of a commit message is 72 chars, so there's no need to break this line. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Suggested-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> > Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com> > --- > drivers/regulator/qcom_spmi-regulator.c | 39 +++++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c > index 41424a3366d0..02bfce981150 100644 > --- a/drivers/regulator/qcom_spmi-regulator.c > +++ b/drivers/regulator/qcom_spmi-regulator.c > @@ -1895,6 +1895,44 @@ static const struct spmi_regulator_data pm8941_regulators[] = { > { } > }; > > +static const struct spmi_regulator_data pm8226_regulators[] = { > + { "s1", 0x1400, "vdd_s1", }, > + { "s2", 0x1700, "vdd_s2", }, > + { "s3", 0x1a00, "vdd_s3", }, > + { "s4", 0x1d00, "vdd_s4", }, > + { "s5", 0x2000, "vdd_s5", }, > + { "l1", 0x4000, "vdd_l1_l2_l4_l5", }, > + { "l2", 0x4100, "vdd_l1_l2_l4_l5", }, > + { "l3", 0x4200, "vdd_l3_l24_l26", }, > + { "l4", 0x4300, "vdd_l1_l2_l4_l5", }, > + { "l5", 0x4400, "vdd_l1_l2_l4_l5", }, > + { "l6", 0x4500, "vdd_l6_l7_l8_l9_l27", }, > + { "l7", 0x4600, "vdd_l6_l7_l8_l9_l27", }, > + { "l8", 0x4700, "vdd_l6_l7_l8_l9_l27", }, > + { "l9", 0x4800, "vdd_l6_l7_l8_l9_l27", }, > + { "l10", 0x4900, "vdd_l10_l11_l13", }, > + { "l11", 0x4a00, "vdd_l10_l11_l13", }, > + { "l12", 0x4b00, "vdd_l12_l14", }, > + { "l13", 0x4c00, "vdd_l10_l11_l13", }, > + { "l14", 0x4d00, "vdd_l12_l14", }, > + { "l15", 0x4e00, "vdd_l15_l16_l17_l18", }, > + { "l16", 0x4f00, "vdd_l15_l16_l17_l18", }, > + { "l17", 0x5000, "vdd_l15_l16_l17_l18", }, > + { "l18", 0x5100, "vdd_l15_l16_l17_l18", }, > + { "l19", 0x5200, "vdd_l19_l20_l21_l22_l23_l28", }, > + { "l20", 0x5300, "vdd_l19_l20_l21_l22_l23_l28", }, > + { "l21", 0x5400, "vdd_l19_l20_l21_l22_l23_l28", }, > + { "l22", 0x5500, "vdd_l19_l20_l21_l22_l23_l28", }, > + { "l23", 0x5600, "vdd_l19_l20_l21_l22_l23_l28", }, > + { "l24", 0x5700, "vdd_l3_l24_l26", }, > + { "l25", 0x5800, "vdd_l25", }, > + { "l26", 0x5900, "vdd_l3_l24_l26", }, > + { "l27", 0x5a00, "vdd_l6_l7_l8_l9_l27", }, > + { "l28", 0x5b00, "vdd_l19_l20_l21_l22_l23_l28", }, > + { "lvs1", 0x8000, "vdd_lvs1", }, > + { } > +}; > + > static const struct spmi_regulator_data pm8841_regulators[] = { > { "s1", 0x1400, "vdd_s1", }, > { "s2", 0x1700, "vdd_s2", NULL, 0x1c08 }, > @@ -2095,6 +2133,7 @@ static const struct spmi_regulator_data pms405_regulators[] = { > static const struct of_device_id qcom_spmi_regulator_match[] = { > { .compatible = "qcom,pm8004-regulators", .data = &pm8004_regulators }, > { .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators }, > + { .compatible = "qcom,pm8226-regulators", .data = &pm8226_regulators }, > { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators }, > { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators }, > { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators }, > -- > 2.34.0 >
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 41424a3366d0..02bfce981150 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -1895,6 +1895,44 @@ static const struct spmi_regulator_data pm8941_regulators[] = { { } }; +static const struct spmi_regulator_data pm8226_regulators[] = { + { "s1", 0x1400, "vdd_s1", }, + { "s2", 0x1700, "vdd_s2", }, + { "s3", 0x1a00, "vdd_s3", }, + { "s4", 0x1d00, "vdd_s4", }, + { "s5", 0x2000, "vdd_s5", }, + { "l1", 0x4000, "vdd_l1_l2_l4_l5", }, + { "l2", 0x4100, "vdd_l1_l2_l4_l5", }, + { "l3", 0x4200, "vdd_l3_l24_l26", }, + { "l4", 0x4300, "vdd_l1_l2_l4_l5", }, + { "l5", 0x4400, "vdd_l1_l2_l4_l5", }, + { "l6", 0x4500, "vdd_l6_l7_l8_l9_l27", }, + { "l7", 0x4600, "vdd_l6_l7_l8_l9_l27", }, + { "l8", 0x4700, "vdd_l6_l7_l8_l9_l27", }, + { "l9", 0x4800, "vdd_l6_l7_l8_l9_l27", }, + { "l10", 0x4900, "vdd_l10_l11_l13", }, + { "l11", 0x4a00, "vdd_l10_l11_l13", }, + { "l12", 0x4b00, "vdd_l12_l14", }, + { "l13", 0x4c00, "vdd_l10_l11_l13", }, + { "l14", 0x4d00, "vdd_l12_l14", }, + { "l15", 0x4e00, "vdd_l15_l16_l17_l18", }, + { "l16", 0x4f00, "vdd_l15_l16_l17_l18", }, + { "l17", 0x5000, "vdd_l15_l16_l17_l18", }, + { "l18", 0x5100, "vdd_l15_l16_l17_l18", }, + { "l19", 0x5200, "vdd_l19_l20_l21_l22_l23_l28", }, + { "l20", 0x5300, "vdd_l19_l20_l21_l22_l23_l28", }, + { "l21", 0x5400, "vdd_l19_l20_l21_l22_l23_l28", }, + { "l22", 0x5500, "vdd_l19_l20_l21_l22_l23_l28", }, + { "l23", 0x5600, "vdd_l19_l20_l21_l22_l23_l28", }, + { "l24", 0x5700, "vdd_l3_l24_l26", }, + { "l25", 0x5800, "vdd_l25", }, + { "l26", 0x5900, "vdd_l3_l24_l26", }, + { "l27", 0x5a00, "vdd_l6_l7_l8_l9_l27", }, + { "l28", 0x5b00, "vdd_l19_l20_l21_l22_l23_l28", }, + { "lvs1", 0x8000, "vdd_lvs1", }, + { } +}; + static const struct spmi_regulator_data pm8841_regulators[] = { { "s1", 0x1400, "vdd_s1", }, { "s2", 0x1700, "vdd_s2", NULL, 0x1c08 }, @@ -2095,6 +2133,7 @@ static const struct spmi_regulator_data pms405_regulators[] = { static const struct of_device_id qcom_spmi_regulator_match[] = { { .compatible = "qcom,pm8004-regulators", .data = &pm8004_regulators }, { .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators }, + { .compatible = "qcom,pm8226-regulators", .data = &pm8226_regulators }, { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators }, { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators }, { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
The PM8226 PMIC is very often seen on MSM8x26 boards. Suggested-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com> --- drivers/regulator/qcom_spmi-regulator.c | 39 +++++++++++++++++++++++++ 1 file changed, 39 insertions(+)