diff mbox series

[1/2] dt-bindings: pinctrl: qcom: Add SM8450 pinctrl bindings

Message ID 20211201072434.3968768-2-vkoul@kernel.org (mailing list archive)
State Not Applicable
Headers show
Series pinctrl: qcom: Add SM8450 pinctrl | expand

Commit Message

Vinod Koul Dec. 1, 2021, 7:24 a.m. UTC 
Add device tree binding Documentation details for Qualcomm SM8450
TLMM device

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml | 143 ++++++++++++++++++
 1 file changed, 143 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml

Comments

Rob Herring Dec. 7, 2021, 9:36 p.m. UTC | #1 
On Wed, 01 Dec 2021 12:54:33 +0530, Vinod Koul wrote:
> Add device tree binding Documentation details for Qualcomm SM8450
> TLMM device
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml | 143 ++++++++++++++++++
>  1 file changed, 143 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Bjorn Andersson Dec. 8, 2021, 4:30 p.m. UTC | #2 
On Tue 30 Nov 23:24 PST 2021, Vinod Koul wrote:

> Add device tree binding Documentation details for Qualcomm SM8450
> TLMM device
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml | 143 ++++++++++++++++++
>  1 file changed, 143 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
> new file mode 100644
> index 000000000000..9c891246245b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
> @@ -0,0 +1,143 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SM8450 TLMM block
> +
> +maintainers:
> +  - Vinod Koul <vkoul@kernel.org>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer (TLMM) block found
> +  in the SM8450 platform.
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,sm8450-tlmm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts: true
> +  interrupt-controller: true
> +  '#interrupt-cells': true
> +  gpio-controller: true
> +  gpio-reserved-ranges: true
> +  '#gpio-cells': true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +patternProperties:
> +  '-state$':
> +    oneOf:
> +      - $ref: "#/$defs/qcom-sm8450-tlmm-state"
> +      - patternProperties:
> +          ".*":
> +            $ref: "#/$defs/qcom-sm8450-tlmm-state"
> +
> +$defs:
> +  qcom-sm8450-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
> +            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
> +        minItems: 1
> +        maxItems: 36
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +        enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
> +                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
> +                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
> +                ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
> +                gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
> +                mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
> +                mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
> +                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
> +                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
> +                mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
> +                pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
> +                prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
> +                qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
> +                qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
> +                qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
> +                qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
> +                qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
> +                qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
> +                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
> +                tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
> +                tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
> +                uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
> +                usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
> +
> +      bias-disable: true
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      drive-strength: true
> +      input-enable: true
> +      output-high: true
> +      output-low: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        pinctrl@f100000 {
> +                compatible = "qcom,sm8450-tlmm";
> +                reg = <0x0f100000 0x300000>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                gpio-ranges = <&tlmm 0 0 211>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +
> +                gpio-wo-subnode-state {
> +                        pins = "gpio1";
> +                        function = "gpio";
> +                };
> +
> +                uart-w-subnodes-state {
> +                    rx {
> +                            pins = "gpio26";
> +                            function = "qup7";
> +                            bias-pull-up;
> +                    };
> +
> +                    tx {
> +                            pins = "gpio27";
> +                            function = "qup7";
> +                            bias-disable;
> +                    };
> +               };
> +        };
> +...
> -- 
> 2.31.1
>
Linus Walleij Dec. 9, 2021, 2:01 a.m. UTC | #3 
On Wed, Dec 1, 2021 at 8:24 AM Vinod Koul <vkoul@kernel.org> wrote:

> Add device tree binding Documentation details for Qualcomm SM8450
> TLMM device
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Patch applied!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
new file mode 100644
index 000000000000..9c891246245b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -0,0 +1,143 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8450 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM8450 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8450-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sm8450-tlmm-state"
+
+$defs:
+  qcom-sm8450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+                mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+                mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
+                pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
+                prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
+                qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
+                qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+                qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
+                qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
+                qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
+                qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+                uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@f100000 {
+                compatible = "qcom,sm8450-tlmm";
+                reg = <0x0f100000 0x300000>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 211>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                    rx {
+                            pins = "gpio26";
+                            function = "qup7";
+                            bias-pull-up;
+                    };
+
+                    tx {
+                            pins = "gpio27";
+                            function = "qup7";
+                            bias-disable;
+                    };
+               };
+        };
+...