| Message ID | 20211217221232.3664417-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 8a3804c030e44335890bc9ca70cfa987488d9ec6 |
| Headers | show |
| Series | ARM: dts: Remove "spidev" nodes | expand |
On 17/12/2021 at 23:12, Rob Herring wrote: > "spidev" is not a real device, but a Linux implementation detail. It has > never been documented either. The kernel has WARNed on the use of it for > over 6 years. Time to remove its usage from the tree. > > Cc: Mark Brown <broonie@kernel.org> > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Arnd, Olof, Can you please apply this directly. > > arch/arm/boot/dts/at91-q5xr5.dts | 18 ---------- > arch/arm/boot/dts/at91-wb50n.dts | 6 ---- For at91: Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Sorry for having re-introduced this use recently. Best regards, Nicolas > arch/arm/boot/dts/imx28-tx28.dts | 36 ------------------- > arch/arm/boot/dts/imx53-tx53.dtsi | 11 ------ > arch/arm/boot/dts/imx6qdl-tx6.dtsi | 12 ------- > .../boot/dts/imx6ul-imx6ull-opos6uldev.dtsi | 12 ------- > arch/arm/boot/dts/imx6ul-prti6g.dts | 6 ---- > arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 24 ------------- > arch/arm/boot/dts/omap3-tao3530.dtsi | 14 -------- > .../dts/qcom-mdm9615-wp8548-mangoh-green.dts | 2 +- > arch/arm/boot/dts/spear1310-evb.dts | 16 --------- > arch/arm/boot/dts/spear1340-evb.dts | 16 --------- > 12 files changed, 1 insertion(+), 172 deletions(-) > > diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts > index 5827383b181b..47a00062f01f 100644 > --- a/arch/arm/boot/dts/at91-q5xr5.dts > +++ b/arch/arm/boot/dts/at91-q5xr5.dts > @@ -147,12 +147,6 @@ uboot@8000 { > reg = <0x8000 0x3E000>; > }; > }; > - > - spidev@1 { > - compatible = "spidev"; > - spi-max-frequency = <2000000>; > - reg = <1>; > - }; > }; > > &spi1 { > @@ -160,18 +154,6 @@ &spi1 { > pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>; > cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>; > status = "okay"; > - > - spidev@0 { > - compatible = "spidev"; > - spi-max-frequency = <2000000>; > - reg = <0>; > - }; > - > - spidev@1 { > - compatible = "spidev"; > - spi-max-frequency = <2000000>; > - reg = <1>; > - }; > }; > > &usart0 { > diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts > index a5e45bb95c04..89f0f717f7ed 100644 > --- a/arch/arm/boot/dts/at91-wb50n.dts > +++ b/arch/arm/boot/dts/at91-wb50n.dts > @@ -90,12 +90,6 @@ &i2c0 { > > &spi1 { > status = "okay"; > - > - spidev@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <8000000>; > - }; > }; > > &usb0 { > diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts > index 164254c28f8e..9e5651c7ea6b 100644 > --- a/arch/arm/boot/dts/imx28-tx28.dts > +++ b/arch/arm/boot/dts/imx28-tx28.dts > @@ -239,24 +239,6 @@ &gpio3 9 GPIO_ACTIVE_LOW > >; > /* enable this and disable ssp3 below, if you need full duplex SPI transfer */ > status = "disabled"; > - > - spi@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <57600000>; > - }; > - > - spi@1 { > - compatible = "spidev"; > - reg = <1>; > - spi-max-frequency = <57600000>; > - }; > - > - spi@2 { > - compatible = "spidev"; > - reg = <2>; > - spi-max-frequency = <57600000>; > - }; > }; > }; > > @@ -700,24 +682,6 @@ &ssp3 { > pinctrl-0 = <&spi3_pins_a>; > clock-frequency = <57600000>; > status = "okay"; > - > - spi@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <57600000>; > - }; > - > - spi@1 { > - compatible = "spidev"; > - reg = <1>; > - spi-max-frequency = <57600000>; > - }; > - > - spi@2 { > - compatible = "spidev"; > - reg = <2>; > - spi-max-frequency = <57600000>; > - }; > }; > > &usb0 { > diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi > index 7c9730f3f820..81c2726a328a 100644 > --- a/arch/arm/boot/dts/imx53-tx53.dtsi > +++ b/arch/arm/boot/dts/imx53-tx53.dtsi > @@ -192,17 +192,6 @@ &gpio2 30 GPIO_ACTIVE_HIGH > &gpio3 19 GPIO_ACTIVE_HIGH > >; > > - spidev0: spi@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <54000000>; > - }; > - > - spidev1: spi@1 { > - compatible = "spidev"; > - reg = <1>; > - spi-max-frequency = <54000000>; > - }; > }; > > &esdhc1 { > diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > index 362e65ccaa78..bcc5bbcce769 100644 > --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > @@ -259,18 +259,6 @@ &gpio2 30 GPIO_ACTIVE_HIGH > &gpio3 19 GPIO_ACTIVE_HIGH > >; > status = "disabled"; > - > - spidev0: spi@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <54000000>; > - }; > - > - spidev1: spi@1 { > - compatible = "spidev"; > - reg = <1>; > - spi-max-frequency = <54000000>; > - }; > }; > > &fec { > diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi > index 935a77d717a6..18cac19aa9b0 100644 > --- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi > +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi > @@ -114,18 +114,6 @@ &ecspi4 { > pinctrl-0 = <&pinctrl_ecspi4>; > cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; > status = "okay"; > - > - spidev0: spi@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <5000000>; > - }; > - > - spidev1: spi@1 { > - compatible = "spidev"; > - reg = <1>; > - spi-max-frequency = <5000000>; > - }; > }; > > &i2c1 { > diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts > index d62015701d0a..c18390f238e1 100644 > --- a/arch/arm/boot/dts/imx6ul-prti6g.dts > +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts > @@ -78,12 +78,6 @@ &ecspi2 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_ecspi2>; > status = "okay"; > - > - spi@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <1000000>; > - }; > }; > > &fec1 { > diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi > index 938a32ced88d..c485d058e079 100644 > --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi > +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi > @@ -227,18 +227,6 @@ &gpio1 29 GPIO_ACTIVE_HIGH > &gpio1 10 GPIO_ACTIVE_HIGH > >; > status = "disabled"; > - > - spi@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <660000>; > - }; > - > - spi@1 { > - compatible = "spidev"; > - reg = <1>; > - spi-max-frequency = <660000>; > - }; > }; > > sound { > @@ -290,18 +278,6 @@ &gpio1 29 GPIO_ACTIVE_HIGH > &gpio1 10 GPIO_ACTIVE_HIGH > >; > status = "disabled"; > - > - spidev0: spi@0 { > - compatible = "spidev"; > - reg = <0>; > - spi-max-frequency = <60000000>; > - }; > - > - spidev1: spi@1 { > - compatible = "spidev"; > - reg = <1>; > - spi-max-frequency = <60000000>; > - }; > }; > > &fec1 { > diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi > index 580bfa1931c8..7f440d11f7e7 100644 > --- a/arch/arm/boot/dts/omap3-tao3530.dtsi > +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi > @@ -197,25 +197,11 @@ &i2c3 { > &mcspi1 { > pinctrl-names = "default"; > pinctrl-0 = <&mcspi1_pins>; > - > - spidev@0 { > - compatible = "spidev"; > - spi-max-frequency = <48000000>; > - reg = <0>; > - spi-cpha; > - }; > }; > > &mcspi3 { > pinctrl-names = "default"; > pinctrl-0 = <&mcspi3_pins>; > - > - spidev@0 { > - compatible = "spidev"; > - spi-max-frequency = <48000000>; > - reg = <0>; > - spi-cpha; > - }; > }; > > #include "twl4030.dtsi" > diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts > index 942e3a2cac35..0827de5426c1 100644 > --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts > +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts > @@ -103,7 +103,7 @@ pins { > > &gsbi3_spi { > spi@0 { > - compatible = "swir,mangoh-iotport-spi", "spidev"; > + compatible = "swir,mangoh-iotport-spi"; > spi-max-frequency = <24000000>; > reg = <0>; > }; > diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts > index 8fcb6be6e7c7..4cbadcb41084 100644 > --- a/arch/arm/boot/dts/spear1310-evb.dts > +++ b/arch/arm/boot/dts/spear1310-evb.dts > @@ -395,22 +395,6 @@ m25p80@1 { > pl022,wait-state = <0>; > pl022,duplex = <0>; > }; > - > - spidev@2 { > - compatible = "spidev"; > - reg = <2>; > - spi-max-frequency = <25000000>; > - spi-cpha; > - pl022,hierarchy = <0>; > - pl022,interface = <0>; > - pl022,slave-tx-disable; > - pl022,com-mode = <0x2>; > - pl022,rx-level-trig = <0>; > - pl022,tx-level-trig = <0>; > - pl022,ctrl-len = <0x11>; > - pl022,wait-state = <0>; > - pl022,duplex = <0>; > - }; > }; > > wdt@ec800620 { > diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts > index f70ff56d4542..fd194ebeedc9 100644 > --- a/arch/arm/boot/dts/spear1340-evb.dts > +++ b/arch/arm/boot/dts/spear1340-evb.dts > @@ -489,22 +489,6 @@ stmpe_touchscreen { > ts,i-drive = <1>; > }; > }; > - > - spidev@2 { > - compatible = "spidev"; > - reg = <2>; > - spi-max-frequency = <25000000>; > - spi-cpha; > - pl022,hierarchy = <0>; > - pl022,interface = <0>; > - pl022,slave-tx-disable; > - pl022,com-mode = <0x2>; > - pl022,rx-level-trig = <0>; > - pl022,tx-level-trig = <0>; > - pl022,ctrl-len = <0x11>; > - pl022,wait-state = <0>; > - pl022,duplex = <0>; > - }; > }; > > timer@ec800600 { > -- > 2.32.0 >
On 17-12-21, 16:12, Rob Herring wrote: > "spidev" is not a real device, but a Linux implementation detail. It has > never been documented either. The kernel has WARNed on the use of it for > over 6 years. Time to remove its usage from the tree. > > Cc: Mark Brown <broonie@kernel.org> > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Arnd, Olof, Can you please apply this directly. > > arch/arm/boot/dts/spear1310-evb.dts | 16 --------- > arch/arm/boot/dts/spear1340-evb.dts | 16 --------- Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Hello Mark, On 20/12/2021 12:30:30+0000, Mark Brown wrote: > On Fri, Dec 17, 2021 at 04:12:32PM -0600, Rob Herring wrote: > > "spidev" is not a real device, but a Linux implementation detail. It has > > never been documented either. The kernel has WARNed on the use of it for > > over 6 years. Time to remove its usage from the tree. > > Reviwed-by: Mark Brown <broonie@kernel.org> You have a typo there so I'm not sure b4 will be able to pick that up
Hello: This patch was applied to qcom/linux.git (for-next) by Arnd Bergmann <arnd@arndb.de>: On Fri, 17 Dec 2021 16:12:32 -0600 you wrote: > "spidev" is not a real device, but a Linux implementation detail. It has > never been documented either. The kernel has WARNed on the use of it for > over 6 years. Time to remove its usage from the tree. > > Cc: Mark Brown <broonie@kernel.org> > Signed-off-by: Rob Herring <robh@kernel.org> > > [...] Here is the summary with links: - ARM: dts: Remove "spidev" nodes https://git.kernel.org/qcom/c/8a3804c030e4 You are awesome, thank you!
diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts index 5827383b181b..47a00062f01f 100644 --- a/arch/arm/boot/dts/at91-q5xr5.dts +++ b/arch/arm/boot/dts/at91-q5xr5.dts @@ -147,12 +147,6 @@ uboot@8000 { reg = <0x8000 0x3E000>; }; }; - - spidev@1 { - compatible = "spidev"; - spi-max-frequency = <2000000>; - reg = <1>; - }; }; &spi1 { @@ -160,18 +154,6 @@ &spi1 { pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>; cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>; status = "okay"; - - spidev@0 { - compatible = "spidev"; - spi-max-frequency = <2000000>; - reg = <0>; - }; - - spidev@1 { - compatible = "spidev"; - spi-max-frequency = <2000000>; - reg = <1>; - }; }; &usart0 { diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts index a5e45bb95c04..89f0f717f7ed 100644 --- a/arch/arm/boot/dts/at91-wb50n.dts +++ b/arch/arm/boot/dts/at91-wb50n.dts @@ -90,12 +90,6 @@ &i2c0 { &spi1 { status = "okay"; - - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <8000000>; - }; }; &usb0 { diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 164254c28f8e..9e5651c7ea6b 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -239,24 +239,6 @@ &gpio3 9 GPIO_ACTIVE_LOW >; /* enable this and disable ssp3 below, if you need full duplex SPI transfer */ status = "disabled"; - - spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <57600000>; - }; - - spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <57600000>; - }; - - spi@2 { - compatible = "spidev"; - reg = <2>; - spi-max-frequency = <57600000>; - }; }; }; @@ -700,24 +682,6 @@ &ssp3 { pinctrl-0 = <&spi3_pins_a>; clock-frequency = <57600000>; status = "okay"; - - spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <57600000>; - }; - - spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <57600000>; - }; - - spi@2 { - compatible = "spidev"; - reg = <2>; - spi-max-frequency = <57600000>; - }; }; &usb0 { diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 7c9730f3f820..81c2726a328a 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -192,17 +192,6 @@ &gpio2 30 GPIO_ACTIVE_HIGH &gpio3 19 GPIO_ACTIVE_HIGH >; - spidev0: spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <54000000>; - }; - - spidev1: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <54000000>; - }; }; &esdhc1 { diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 362e65ccaa78..bcc5bbcce769 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -259,18 +259,6 @@ &gpio2 30 GPIO_ACTIVE_HIGH &gpio3 19 GPIO_ACTIVE_HIGH >; status = "disabled"; - - spidev0: spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <54000000>; - }; - - spidev1: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <54000000>; - }; }; &fec { diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi index 935a77d717a6..18cac19aa9b0 100644 --- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi @@ -114,18 +114,6 @@ &ecspi4 { pinctrl-0 = <&pinctrl_ecspi4>; cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; status = "okay"; - - spidev0: spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <5000000>; - }; - - spidev1: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <5000000>; - }; }; &i2c1 { diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts index d62015701d0a..c18390f238e1 100644 --- a/arch/arm/boot/dts/imx6ul-prti6g.dts +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts @@ -78,12 +78,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; - - spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <1000000>; - }; }; &fec1 { diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 938a32ced88d..c485d058e079 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -227,18 +227,6 @@ &gpio1 29 GPIO_ACTIVE_HIGH &gpio1 10 GPIO_ACTIVE_HIGH >; status = "disabled"; - - spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <660000>; - }; - - spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <660000>; - }; }; sound { @@ -290,18 +278,6 @@ &gpio1 29 GPIO_ACTIVE_HIGH &gpio1 10 GPIO_ACTIVE_HIGH >; status = "disabled"; - - spidev0: spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <60000000>; - }; - - spidev1: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <60000000>; - }; }; &fec1 { diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 580bfa1931c8..7f440d11f7e7 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -197,25 +197,11 @@ &i2c3 { &mcspi1 { pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - - spidev@0 { - compatible = "spidev"; - spi-max-frequency = <48000000>; - reg = <0>; - spi-cpha; - }; }; &mcspi3 { pinctrl-names = "default"; pinctrl-0 = <&mcspi3_pins>; - - spidev@0 { - compatible = "spidev"; - spi-max-frequency = <48000000>; - reg = <0>; - spi-cpha; - }; }; #include "twl4030.dtsi" diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts index 942e3a2cac35..0827de5426c1 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts @@ -103,7 +103,7 @@ pins { &gsbi3_spi { spi@0 { - compatible = "swir,mangoh-iotport-spi", "spidev"; + compatible = "swir,mangoh-iotport-spi"; spi-max-frequency = <24000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8fcb6be6e7c7..4cbadcb41084 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -395,22 +395,6 @@ m25p80@1 { pl022,wait-state = <0>; pl022,duplex = <0>; }; - - spidev@2 { - compatible = "spidev"; - reg = <2>; - spi-max-frequency = <25000000>; - spi-cpha; - pl022,hierarchy = <0>; - pl022,interface = <0>; - pl022,slave-tx-disable; - pl022,com-mode = <0x2>; - pl022,rx-level-trig = <0>; - pl022,tx-level-trig = <0>; - pl022,ctrl-len = <0x11>; - pl022,wait-state = <0>; - pl022,duplex = <0>; - }; }; wdt@ec800620 { diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index f70ff56d4542..fd194ebeedc9 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -489,22 +489,6 @@ stmpe_touchscreen { ts,i-drive = <1>; }; }; - - spidev@2 { - compatible = "spidev"; - reg = <2>; - spi-max-frequency = <25000000>; - spi-cpha; - pl022,hierarchy = <0>; - pl022,interface = <0>; - pl022,slave-tx-disable; - pl022,com-mode = <0x2>; - pl022,rx-level-trig = <0>; - pl022,tx-level-trig = <0>; - pl022,ctrl-len = <0x11>; - pl022,wait-state = <0>; - pl022,duplex = <0>; - }; }; timer@ec800600 {
"spidev" is not a real device, but a Linux implementation detail. It has never been documented either. The kernel has WARNed on the use of it for over 6 years. Time to remove its usage from the tree. Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> --- Arnd, Olof, Can you please apply this directly. arch/arm/boot/dts/at91-q5xr5.dts | 18 ---------- arch/arm/boot/dts/at91-wb50n.dts | 6 ---- arch/arm/boot/dts/imx28-tx28.dts | 36 ------------------- arch/arm/boot/dts/imx53-tx53.dtsi | 11 ------ arch/arm/boot/dts/imx6qdl-tx6.dtsi | 12 ------- .../boot/dts/imx6ul-imx6ull-opos6uldev.dtsi | 12 ------- arch/arm/boot/dts/imx6ul-prti6g.dts | 6 ---- arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 24 ------------- arch/arm/boot/dts/omap3-tao3530.dtsi | 14 -------- .../dts/qcom-mdm9615-wp8548-mangoh-green.dts | 2 +- arch/arm/boot/dts/spear1310-evb.dts | 16 --------- arch/arm/boot/dts/spear1340-evb.dts | 16 --------- 12 files changed, 1 insertion(+), 172 deletions(-)