| Message ID | 20220109000348.106534-1-david@ixit.cz (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v3] dt-bindings: display/msm: hdmi: split and convert to yaml | expand |
On Sun, Jan 09, 2022 at 01:03:47AM +0100, David Heidelberg wrote: > Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings. > > Other changes: > - fixed reg-names numbering to match 0..3 instead 0,1,3,4 > - phy part moved into phy/ directory > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > v2: > - move phy into phy/ > - added maxItems for gpios > - simplified pinctrl-names > - dropped some inconsistent quotes > > v3: > - adjusted $id of phy file to the new path from v2 > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../devicetree/bindings/display/msm/hdmi.txt | 99 --------- > .../bindings/display/msm/qcom,hdmi.yaml | 206 ++++++++++++++++++ > .../bindings/phy/qcom,hdmi-phy.yaml | 119 ++++++++++ > 3 files changed, 325 insertions(+), 99 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.txt > create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml > create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml > > diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt > deleted file mode 100644 > index 5f90a40da51b..000000000000 > --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt > +++ /dev/null > @@ -1,99 +0,0 @@ > -Qualcomm adreno/snapdragon hdmi output > - > -Required properties: > -- compatible: one of the following > - * "qcom,hdmi-tx-8996" > - * "qcom,hdmi-tx-8994" > - * "qcom,hdmi-tx-8084" > - * "qcom,hdmi-tx-8974" > - * "qcom,hdmi-tx-8660" > - * "qcom,hdmi-tx-8960" > -- reg: Physical base address and length of the controller's registers > -- reg-names: "core_physical" > -- interrupts: The interrupt signal from the hdmi block. > -- power-domains: Should be <&mmcc MDSS_GDSC>. > -- clocks: device clocks > - See ../clocks/clock-bindings.txt for details. > -- core-vdda-supply: phandle to supply regulator > -- hdmi-mux-supply: phandle to mux regulator > -- phys: the phandle for the HDMI PHY device > -- phy-names: the name of the corresponding PHY device > - > -Optional properties: > -- hpd-gpios: hpd pin > -- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin > -- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin > -- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin > -- power-domains: reference to the power domain(s), if available. > -- pinctrl-names: the pin control state names; should contain "default" > -- pinctrl-0: the default pinctrl state (active) > -- pinctrl-1: the "sleep" pinctrl state > - > -HDMI PHY: > -Required properties: > -- compatible: Could be the following > - * "qcom,hdmi-phy-8660" > - * "qcom,hdmi-phy-8960" > - * "qcom,hdmi-phy-8974" > - * "qcom,hdmi-phy-8084" > - * "qcom,hdmi-phy-8996" > -- #phy-cells: Number of cells in a PHY specifier; Should be 0. > -- reg: Physical base address and length of the registers of the PHY sub blocks. > -- reg-names: The names of register regions. The following regions are required: > - * "hdmi_phy" > - * "hdmi_pll" > - For HDMI PHY on msm8996, these additional register regions are required: > - * "hdmi_tx_l0" > - * "hdmi_tx_l1" > - * "hdmi_tx_l3" > - * "hdmi_tx_l4" > -- power-domains: Should be <&mmcc MDSS_GDSC>. > -- clocks: device clocks > - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. > -- core-vdda-supply: phandle to vdda regulator device node > - > -Example: > - > -/ { > - ... > - > - hdmi: hdmi@4a00000 { > - compatible = "qcom,hdmi-tx-8960"; > - reg-names = "core_physical"; > - reg = <0x04a00000 0x2f0>; > - interrupts = <GIC_SPI 79 0>; > - power-domains = <&mmcc MDSS_GDSC>; > - clock-names = > - "core", > - "master_iface", > - "slave_iface"; > - clocks = > - <&mmcc HDMI_APP_CLK>, > - <&mmcc HDMI_M_AHB_CLK>, > - <&mmcc HDMI_S_AHB_CLK>; > - qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; > - qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; > - qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; > - core-vdda-supply = <&pm8921_hdmi_mvs>; > - hdmi-mux-supply = <&ext_3p3v>; > - pinctrl-names = "default", "sleep"; > - pinctrl-0 = <&hpd_active &ddc_active &cec_active>; > - pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; > - > - phys = <&hdmi_phy>; > - phy-names = "hdmi_phy"; > - }; > - > - hdmi_phy: phy@4a00400 { > - compatible = "qcom,hdmi-phy-8960"; > - reg-names = "hdmi_phy", > - "hdmi_pll"; > - reg = <0x4a00400 0x60>, > - <0x4a00500 0x100>; > - #phy-cells = <0>; > - power-domains = <&mmcc MDSS_GDSC>; > - clock-names = "slave_iface"; > - clocks = <&mmcc HDMI_S_AHB_CLK>; > - core-vdda-supply = <&pm8921_hdmi_mvs>; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml b/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml > new file mode 100644 > index 000000000000..33ebc879af93 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml > @@ -0,0 +1,206 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > + > +$id: "http://devicetree.org/schemas/display/msm/qcom,hdmi.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Qualcomm Adreno/Snapdragon HDMI output > + > +maintainers: > + - Rob Clark <robdclark@gmail.com> > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: qcom,hdmi-tx-8996 > + then: > + properties: > + clocks: > + minItems: 5 > + maxItems: 5 > + > + clock-names: > + items: > + - const: mdp_core > + - const: iface > + - const: core > + - const: alt_iface > + - const: extp > + else: > + properties: > + clocks: > + minItems: 1 > + maxItems: 5 > + > + clock-names: > + minItems: 1 > + maxItems: 5 So for !8996 we have a 1-5 undefined clocks? Though like all the other messes I imagine there's 5 different variations. > + > + > +properties: > + compatible: > + enum: > + - qcom,hdmi-tx-8996 > + - qcom,hdmi-tx-8994 > + - qcom,hdmi-tx-8084 > + - qcom,hdmi-tx-8974 > + - qcom,hdmi-tx-8660 > + - qcom,hdmi-tx-8960 > + > + clocks: true > + > + clock-names: true > + > + reg: > + minItems: 1 > + maxItems: 3 > + description: Physical base address and length of the controller's registers > + > + reg-names: > + minItems: 1 > + items: > + - const: core_physical > + - const: qfprom_physical > + - const: hdcp_physical > + > + interrupts: > + maxItems: 1 > + description: The interrupt signal from the hdmi block. Don't need a generic description. > + > + power-domains: > + description: should be <&mmcc MDSS_GDSC> Drop. Should be 'maxItems: 1'. > + > + core-vdda-supply: true > + > + core-vcc-supply: true > + > + hdmi-mux-supply: > + description: phandle to mux regulator > + > + phys: > + description: the phandle for the HDMI PHY device How many? > + > + phy-names: > + description: the name of the corresponding PHY device names? > + > + hpd-gpios: > + maxItems: 1 > + description: hpd pin > + > + qcom,hdmi-tx-ddc-clk-gpios: > + maxItems: 1 > + description: HDMI DDC clock > + > + qcom,hdmi-tx-ddc-data-gpios: > + maxItems: 1 > + description: HDMI DDC data > + > + qcom,hdmi-tx-mux-en-gpios: > + maxItems: 1 > + description: HDMI mux enable pin > + > + qcom,hdmi-tx-mux-sel-gpios: > + maxItems: 1 > + description: HDMI mux select pin > + > + qcom,hdmi-tx-mux-lpm-gpios: > + maxItems: 1 > + description: HDMI mux lpm pin > + > + pinctrl-0: true > + pinctrl-1: true > + > + pinctrl-names: > + minItems: 1 > + items: > + - const: default > + - const: sleep > + > + '#phy-cells': > + const: 0 The HDMI block is a phy provider? > + > + '#sound-dai-cells': > + const: 1 > + > + ports: > + type: object > + $ref: /schemas/graph.yaml#/properties/ports > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: | > + Input endpoints of the controller. > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + properties: > + data-lanes: > + maxItems: 4 > + minItems: 4 > + items: > + enum: [0, 1, 2, 3] > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: | > + Output endpoints of the controller. > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + properties: > + data-lanes: > + maxItems: 4 > + minItems: 4 > + items: > + enum: [0, 1, 2, 3] > + > + required: > + - port@0 > + > +required: > + - compatible > + - clocks > + - clock-names > + - reg > + - reg-names > + - interrupts > + - phys > + - phy-names > + > +additionalProperties: false > + > +examples: > + - | > + hdmi: hdmi@4a00000 { > + compatible = "qcom,hdmi-tx-8960"; > + reg-names = "core_physical"; > + reg = <0x04a00000 0x2f0>; > + interrupts = <0 79 0>; > + power-domains = <&mmcc 1>; > + clock-names = > + "core", > + "master_iface", > + "slave_iface"; > + clocks = > + <&clk 61>, > + <&clk 72>, > + <&clk 98>; > + qcom,hdmi-tx-ddc-clk-gpios = <&msmgpio 70 0>; > + qcom,hdmi-tx-ddc-data-gpios = <&msmgpio 71 0>; > + hpd-gpios = <&msmgpio 72 0>; > + core-vdda-supply = <&pm8921_hdmi_mvs>; > + hdmi-mux-supply = <&ext_3p3v>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&hpd_active &ddc_active &cec_active>; > + pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; > + > + phys = <&hdmi_phy>; > + phy-names = "hdmi_phy"; > + }; > diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml > new file mode 100644 > index 000000000000..1203b0c6709f > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml > @@ -0,0 +1,119 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > + > +$id: "http://devicetree.org/schemas/phy/qcom,hdmi-phy.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Qualcomm Adreno/Snapdragon HDMI phy > + > +maintainers: > + - Rob Clark <robdclark@gmail.com> > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: qcom,hdmi-phy-8996 > + then: > + properties: > + reg: > + minItems: 6 > + maxItems: 6 > + > + reg-names: > + items: > + - const: hdmi_pll > + - const: hdmi_tx_l0 > + - const: hdmi_tx_l1 > + - const: hdmi_tx_l2 > + - const: hdmi_tx_l3 > + - const: hdmi_phy > + > + else: > + properties: > + reg: > + minItems: 2 > + maxItems: 2 > + > + reg-names: > + items: > + - const: hdmi_phy > + - const: hdmi_pll > + - if: > + properties: > + compatible: > + contains: > + const: qcom,hdmi-phy-8960 > + then: > + properties: > + clock-names: > + const: slave_iface > + > + - if: > + properties: > + compatible: > + contains: > + const: qcom,hdmi-phy-8996 > + then: > + properties: > + clock-names: > + items: > + - const: iface > + - const: ref > + > +properties: > + compatible: > + contains: > + enum: > + - qcom,hdmi-phy-8084 > + - qcom,hdmi-phy-8660 > + - qcom,hdmi-phy-8960 > + - qcom,hdmi-phy-8974 > + - qcom,hdmi-phy-8994 > + - qcom,hdmi-phy-8996 > + > + reg: true > + > + reg-names: true > + > + clocks: true > + > + clock-names: true > + > + power-domains: > + maxItems: 1 > + > + core-vdda-supply: true > + > + vcca-supply: true > + > + vddio-supply: true > + > + '#phy-cells': > + const: 0 > + > +required: > + - compatible > + - clocks > + - reg > + - reg-names > + - '#phy-cells' > + > +additionalProperties: false > + > +examples: > + - | > + hdmi_phy: phy@4a00400 { > + compatible = "qcom,hdmi-phy-8960"; > + reg-names = "hdmi_phy", > + "hdmi_pll"; > + reg = <0x4a00400 0x60>, > + <0x4a00500 0x100>; > + #phy-cells = <0>; > + power-domains = <&mmcc 1>; > + clock-names = "slave_iface"; > + clocks = <&clk 21>; > + core-vdda-supply = <&pm8921_hdmi_mvs>; > + }; > -- > 2.34.1 > >
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt deleted file mode 100644 index 5f90a40da51b..000000000000 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ /dev/null @@ -1,99 +0,0 @@ -Qualcomm adreno/snapdragon hdmi output - -Required properties: -- compatible: one of the following - * "qcom,hdmi-tx-8996" - * "qcom,hdmi-tx-8994" - * "qcom,hdmi-tx-8084" - * "qcom,hdmi-tx-8974" - * "qcom,hdmi-tx-8660" - * "qcom,hdmi-tx-8960" -- reg: Physical base address and length of the controller's registers -- reg-names: "core_physical" -- interrupts: The interrupt signal from the hdmi block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See ../clocks/clock-bindings.txt for details. -- core-vdda-supply: phandle to supply regulator -- hdmi-mux-supply: phandle to mux regulator -- phys: the phandle for the HDMI PHY device -- phy-names: the name of the corresponding PHY device - -Optional properties: -- hpd-gpios: hpd pin -- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin -- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin -- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin -- power-domains: reference to the power domain(s), if available. -- pinctrl-names: the pin control state names; should contain "default" -- pinctrl-0: the default pinctrl state (active) -- pinctrl-1: the "sleep" pinctrl state - -HDMI PHY: -Required properties: -- compatible: Could be the following - * "qcom,hdmi-phy-8660" - * "qcom,hdmi-phy-8960" - * "qcom,hdmi-phy-8974" - * "qcom,hdmi-phy-8084" - * "qcom,hdmi-phy-8996" -- #phy-cells: Number of cells in a PHY specifier; Should be 0. -- reg: Physical base address and length of the registers of the PHY sub blocks. -- reg-names: The names of register regions. The following regions are required: - * "hdmi_phy" - * "hdmi_pll" - For HDMI PHY on msm8996, these additional register regions are required: - * "hdmi_tx_l0" - * "hdmi_tx_l1" - * "hdmi_tx_l3" - * "hdmi_tx_l4" -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- core-vdda-supply: phandle to vdda regulator device node - -Example: - -/ { - ... - - hdmi: hdmi@4a00000 { - compatible = "qcom,hdmi-tx-8960"; - reg-names = "core_physical"; - reg = <0x04a00000 0x2f0>; - interrupts = <GIC_SPI 79 0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "core", - "master_iface", - "slave_iface"; - clocks = - <&mmcc HDMI_APP_CLK>, - <&mmcc HDMI_M_AHB_CLK>, - <&mmcc HDMI_S_AHB_CLK>; - qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; - qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; - qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; - core-vdda-supply = <&pm8921_hdmi_mvs>; - hdmi-mux-supply = <&ext_3p3v>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hpd_active &ddc_active &cec_active>; - pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; - - phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; - }; - - hdmi_phy: phy@4a00400 { - compatible = "qcom,hdmi-phy-8960"; - reg-names = "hdmi_phy", - "hdmi_pll"; - reg = <0x4a00400 0x60>, - <0x4a00500 0x100>; - #phy-cells = <0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = "slave_iface"; - clocks = <&mmcc HDMI_S_AHB_CLK>; - core-vdda-supply = <&pm8921_hdmi_mvs>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml b/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml new file mode 100644 index 000000000000..33ebc879af93 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/qcom,hdmi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Adreno/Snapdragon HDMI output + +maintainers: + - Rob Clark <robdclark@gmail.com> + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,hdmi-tx-8996 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + + clock-names: + items: + - const: mdp_core + - const: iface + - const: core + - const: alt_iface + - const: extp + else: + properties: + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + +properties: + compatible: + enum: + - qcom,hdmi-tx-8996 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + + clocks: true + + clock-names: true + + reg: + minItems: 1 + maxItems: 3 + description: Physical base address and length of the controller's registers + + reg-names: + minItems: 1 + items: + - const: core_physical + - const: qfprom_physical + - const: hdcp_physical + + interrupts: + maxItems: 1 + description: The interrupt signal from the hdmi block. + + power-domains: + description: should be <&mmcc MDSS_GDSC> + + core-vdda-supply: true + + core-vcc-supply: true + + hdmi-mux-supply: + description: phandle to mux regulator + + phys: + description: the phandle for the HDMI PHY device + + phy-names: + description: the name of the corresponding PHY device + + hpd-gpios: + maxItems: 1 + description: hpd pin + + qcom,hdmi-tx-ddc-clk-gpios: + maxItems: 1 + description: HDMI DDC clock + + qcom,hdmi-tx-ddc-data-gpios: + maxItems: 1 + description: HDMI DDC data + + qcom,hdmi-tx-mux-en-gpios: + maxItems: 1 + description: HDMI mux enable pin + + qcom,hdmi-tx-mux-sel-gpios: + maxItems: 1 + description: HDMI mux select pin + + qcom,hdmi-tx-mux-lpm-gpios: + maxItems: 1 + description: HDMI mux lpm pin + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + '#phy-cells': + const: 0 + + '#sound-dai-cells': + const: 1 + + ports: + type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + Input endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 4 + items: + enum: [0, 1, 2, 3] + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + Output endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 4 + items: + enum: [0, 1, 2, 3] + + required: + - port@0 + +required: + - compatible + - clocks + - clock-names + - reg + - reg-names + - interrupts + - phys + - phy-names + +additionalProperties: false + +examples: + - | + hdmi: hdmi@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x2f0>; + interrupts = <0 79 0>; + power-domains = <&mmcc 1>; + clock-names = + "core", + "master_iface", + "slave_iface"; + clocks = + <&clk 61>, + <&clk 72>, + <&clk 98>; + qcom,hdmi-tx-ddc-clk-gpios = <&msmgpio 70 0>; + qcom,hdmi-tx-ddc-data-gpios = <&msmgpio 71 0>; + hpd-gpios = <&msmgpio 72 0>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hpd_active &ddc_active &cec_active>; + pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml new file mode 100644 index 000000000000..1203b0c6709f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/phy/qcom,hdmi-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Adreno/Snapdragon HDMI phy + +maintainers: + - Rob Clark <robdclark@gmail.com> + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,hdmi-phy-8996 + then: + properties: + reg: + minItems: 6 + maxItems: 6 + + reg-names: + items: + - const: hdmi_pll + - const: hdmi_tx_l0 + - const: hdmi_tx_l1 + - const: hdmi_tx_l2 + - const: hdmi_tx_l3 + - const: hdmi_phy + + else: + properties: + reg: + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: hdmi_phy + - const: hdmi_pll + - if: + properties: + compatible: + contains: + const: qcom,hdmi-phy-8960 + then: + properties: + clock-names: + const: slave_iface + + - if: + properties: + compatible: + contains: + const: qcom,hdmi-phy-8996 + then: + properties: + clock-names: + items: + - const: iface + - const: ref + +properties: + compatible: + contains: + enum: + - qcom,hdmi-phy-8084 + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + - qcom,hdmi-phy-8974 + - qcom,hdmi-phy-8994 + - qcom,hdmi-phy-8996 + + reg: true + + reg-names: true + + clocks: true + + clock-names: true + + power-domains: + maxItems: 1 + + core-vdda-supply: true + + vcca-supply: true + + vddio-supply: true + + '#phy-cells': + const: 0 + +required: + - compatible + - clocks + - reg + - reg-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + hdmi_phy: phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg-names = "hdmi_phy", + "hdmi_pll"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + #phy-cells = <0>; + power-domains = <&mmcc 1>; + clock-names = "slave_iface"; + clocks = <&clk 21>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + };