deleted file mode 100644
@@ -1,114 +0,0 @@
-Qualcomm adreno/snapdragon MDP4 display controller
-
-Description:
-
-This is the bindings documentation for the MDP4 display controller found in
-SoCs like MSM8960, APQ8064 and MSM8660.
-
-Required properties:
-- compatible:
- * "qcom,mdp4" - mdp4
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the display controller.
-- clocks: device clocks
- See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
- * "core_clk"
- * "iface_clk"
- * "bus_clk"
- * "lut_clk"
- * "hdmi_clk"
- * "tv_clk"
-- ports: contains the list of output ports from MDP. These connect to interfaces
- that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
- special case since it is a part of the MDP block itself).
-
- Each output port contains an endpoint that describes how it is connected to an
- external interface. These are described by the standard properties documented
- here:
- Documentation/devicetree/bindings/graph.txt
- Documentation/devicetree/bindings/media/video-interfaces.txt
-
- The output port mappings are:
- Port 0 -> LCDC/LVDS
- Port 1 -> DSI1 Cmd/Video
- Port 2 -> DSI2 Cmd/Video
- Port 3 -> DTV
-
-Optional properties:
-- clock-names: the following clocks are optional:
- * "lut_clk"
-- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be
- used for LCDC. This is only valid for 18bpp panels.
-
-Example:
-
-/ {
- ...
-
- hdmi: hdmi@4a00000 {
- ...
- ports {
- ...
- port@0 {
- reg = <0>;
- hdmi_in: endpoint {
- remote-endpoint = <&mdp_dtv_out>;
- };
- };
- ...
- };
- ...
- };
-
- ...
-
- mdp: mdp@5100000 {
- compatible = "qcom,mdp4";
- reg = <0x05100000 0xf0000>;
- interrupts = <GIC_SPI 75 0>;
- clock-names =
- "core_clk",
- "iface_clk",
- "lut_clk",
- "hdmi_clk",
- "tv_clk";
- clocks =
- <&mmcc MDP_CLK>,
- <&mmcc MDP_AHB_CLK>,
- <&mmcc MDP_AXI_CLK>,
- <&mmcc MDP_LUT_CLK>,
- <&mmcc HDMI_TV_CLK>,
- <&mmcc MDP_TV_CLK>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- mdp_lvds_out: endpoint {
- };
- };
-
- port@1 {
- reg = <1>;
- mdp_dsi1_out: endpoint {
- };
- };
-
- port@2 {
- reg = <2>;
- mdp_dsi2_out: endpoint {
- };
- };
-
- port@3 {
- reg = <3>;
- mdp_dtv_out: endpoint {
- remote-endpoint = <&hdmi_in>;
- };
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/msm/mdp4.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Adreno/Snapdragon MDP4 display controller
+
+description: >
+ MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660.
+
+maintainers:
+ - Rob Clark <robdclark@gmail.com>
+
+properties:
+ compatible:
+ const: qcom,mdp4
+
+ clocks:
+ minItems: 6
+ maxItems: 6
+
+ clock-names:
+ items:
+ - const: core_clk
+ - const: iface_clk
+ - const: bus_clk
+ - const: lut_clk
+ - const: hdmi_clk
+ - const: tv_clk
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: LCDC/LVDS
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI1 Cmd / Video
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI2 Cmd / Video
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Digital TV
+
+ qcom,lcdc-align-lsb:
+ type: boolean
+ description: >
+ Indication that LSB alignment should be used for LCDC.
+ This is only valid for 18bpp panels.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ mdp: mdp@5100000 {
+ compatible = "qcom,mdp4";
+ reg = <0x05100000 0xf0000>;
+ interrupts = <0 75 0>;
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "bus_clk",
+ "lut_clk",
+ "hdmi_clk",
+ "tv_clk";
+ clocks =
+ <&mmcc 77>,
+ <&mmcc 86>,
+ <&mmcc 102>,
+ <&mmcc 75>,
+ <&mmcc 97>,
+ <&mmcc 12>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp_lvds_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdp_dsi1_out: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ mdp_dsi2_out: endpoint {
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ mdp_dtv_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
Convert mdp4 binding into yaml format. Signed-off-by: David Heidelberg <david@ixit.cz> --- .../devicetree/bindings/display/msm/mdp4.txt | 114 ---------------- .../devicetree/bindings/display/msm/mdp4.yaml | 124 ++++++++++++++++++ 2 files changed, 124 insertions(+), 114 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.txt create mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.yaml