| Message ID | 20220321133318.99406-7-luca.weiss@fairphone.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | UFS support on SM6350 & FP4 | expand |
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index adb6ca2be2a5..533a1c88040f 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -336,6 +336,24 @@ &uart2 { status = "okay"; }; +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7e>; + vcc-max-microamp = <800000>; + vccq2-supply = <&vreg_l12a>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l22a>; +}; + &usb_1 { status = "okay"; };
Configure and enable the nodes for UFS that are used for internal storage on FP4. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- Changes in v2: - nothing .../boot/dts/qcom/sm7225-fairphone-fp4.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)