diff mbox series

[v3,1/9] arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema

Message ID 20220402184011.132465-2-krzysztof.kozlowski@linaro.org (mailing list archive)
State Superseded
Headers show
Series dt-bindings: qcom: convert entire GSBI (QUP I2C/SPI/UART) to DT schema | expand

Commit Message

Krzysztof Kozlowski April 2, 2022, 6:40 p.m. UTC 
The DT schema expects dma channels in tx-rx order.  No functional
change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Dropped Kuldeep's ack because of changes - more properties changed.
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi |  8 +++----
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 +++++++-------
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 32 +++++++++++++--------------
 arch/arm64/boot/dts/qcom/qcs404.dtsi  | 20 ++++++++---------
 4 files changed, 38 insertions(+), 38 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index aac56575e30d..87c28ffa44d3 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -322,8 +322,8 @@  i2c_0: i2c@78b6000 {
 				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			clock-frequency  = <400000>;
-			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -337,8 +337,8 @@  i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */
 				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			clock-frequency  = <400000>;
-			dmas = <&blsp_dma 17>, <&blsp_dma 16>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index d80b1cefab10..2072638006a4 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -471,8 +471,8 @@  blsp1_i2c2: i2c@78b6000 {
 				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			clock-frequency = <400000>;
-			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
 			pinctrl-0 = <&i2c_0_pins>;
 			pinctrl-names = "default";
 			status = "disabled";
@@ -488,8 +488,8 @@  blsp1_i2c3: i2c@78b7000 {
 				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			clock-frequency = <100000>;
-			dmas = <&blsp_dma 17>, <&blsp_dma 16>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -503,8 +503,8 @@  blsp1_i2c5: i2c@78b9000 {
 				 <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			clock-frequency = <400000>;
-			dmas = <&blsp_dma 21>, <&blsp_dma 20>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -518,8 +518,8 @@  blsp1_i2c6: i2c@78ba000 {
 				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			clock-frequency = <100000>;
-			dmas = <&blsp_dma 23>, <&blsp_dma 22>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 22>, <&blsp_dma 23>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index e34963505e07..384fc8738130 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1485,8 +1485,8 @@  blsp1_uart1: serial@78af000 {
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp1_uart1_default>;
 			pinctrl-1 = <&blsp1_uart1_sleep>;
@@ -1499,8 +1499,8 @@  blsp1_uart2: serial@78b0000 {
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp1_uart2_default>;
 			pinctrl-1 = <&blsp1_uart2_sleep>;
@@ -1529,8 +1529,8 @@  blsp_spi1: spi@78b5000 {
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi1_default>;
 			pinctrl-1 = <&spi1_sleep>;
@@ -1561,8 +1561,8 @@  blsp_spi2: spi@78b6000 {
 			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi2_default>;
 			pinctrl-1 = <&spi2_sleep>;
@@ -1593,8 +1593,8 @@  blsp_spi3: spi@78b7000 {
 			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi3_default>;
 			pinctrl-1 = <&spi3_sleep>;
@@ -1625,8 +1625,8 @@  blsp_spi4: spi@78b8000 {
 			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi4_default>;
 			pinctrl-1 = <&spi4_sleep>;
@@ -1657,8 +1657,8 @@  blsp_spi5: spi@78b9000 {
 			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 13>, <&blsp_dma 12>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi5_default>;
 			pinctrl-1 = <&spi5_sleep>;
@@ -1689,8 +1689,8 @@  blsp_spi6: spi@78ba000 {
 			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&spi6_default>;
 			pinctrl-1 = <&spi6_sleep>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 3f06f7cd3cf2..6b3a8e1006d0 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -823,8 +823,8 @@  blsp1_uart0: serial@78af000 {
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp1_dma 1>, <&blsp1_dma 0>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_uart0_default>;
 			status = "disabled";
@@ -836,8 +836,8 @@  blsp1_uart1: serial@78b0000 {
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp1_dma 3>, <&blsp1_dma 2>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_uart1_default>;
 			status = "disabled";
@@ -849,8 +849,8 @@  blsp1_uart2: serial@78b1000 {
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp1_dma 5>, <&blsp1_dma 4>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_uart2_default>;
 			status = "okay";
@@ -903,8 +903,8 @@  blsp1_uart3: serial@78b2000 {
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp1_dma 7>, <&blsp1_dma 6>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp1_uart3_default>;
 			status = "disabled";
@@ -1067,8 +1067,8 @@  blsp2_uart0: serial@7aef000 {
 			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp2_dma 1>, <&blsp2_dma 0>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp2_uart0_default>;
 			status = "disabled";