From patchwork Tue Apr 5 06:34:51 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 12801046 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 580CBC433FE for ; Tue, 5 Apr 2022 06:35:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230345AbiDEGhl (ORCPT ); Tue, 5 Apr 2022 02:37:41 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49470 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230359AbiDEGhd (ORCPT ); Tue, 5 Apr 2022 02:37:33 -0400 Received: from mail-ej1-x635.google.com (mail-ej1-x635.google.com [IPv6:2a00:1450:4864:20::635]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B214718B38 for ; Mon, 4 Apr 2022 23:35:20 -0700 (PDT) Received: by mail-ej1-x635.google.com with SMTP id ot30so14596204ejb.12 for ; Mon, 04 Apr 2022 23:35:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=CBvlbU43jHzlylVBNIqHKM031Xg4IT9urGiAHQVtPUQ=; b=II3h2PtUIgEV6c5K+3sALeQYfGFWVVfOmHcA+KQYJewDuem5RY1eAAR4hoPWhjJqYs 1LrqSLJt6tDpxWU3S9XndOtaZKz1DoA2+/AqybjdcNI8/+C3rPgVEuKdO3CeCHWDnubJ a6JWFuovkctm1Yy2t6qnq1zgffR3LWt/7tPnSIEoVmKpu5aidJHfq79jwO7GYJTxs+BA eTJNRXiyZGeqqGikyCd8iOzPEd3V1BSx1E1FCcpsi7CEfCLXqKln2gHHFnct/QZqVVX9 CLML1z7QttWQ5VZGVSY05P6b3KPZM1CMyothq7HZ+FORKf18dMFd/xhdO62Fl3ZeJ/mA tCzQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=CBvlbU43jHzlylVBNIqHKM031Xg4IT9urGiAHQVtPUQ=; b=7E919z0lsioPMZB3mroohvnku3hYXu1ZBVtcLHSf57xwAt/+cR1H7Qn6JD9lZdNok6 5uShThIuRDviTT3GDnPuhQ2RMenOEN/GOeEecHJ8ipfDeSH12li0ojSsHBCd1fEV+PJY m5uIN9if2afRXYlJQ2pacgwokb/YLP4hG7ufVHTl3I9YDBqohgA0b7wMPRg5OT3kes1T qLzWPE6JaU/1fgKz3gf6Gp/wZAB+RX/REXeYLJEAAFgIb7ahs+Te5Mby4lE025DVnu2b 3HschlVP2frN4UqtbAa6BuoIHxgqTL64oLzriBGd2KlaRtXhx/MfiXoD+Omvh0msbe/X Yb2A== X-Gm-Message-State: AOAM532RJ3902nj9M+Fbsioh88tnxuWGPvdZh3d2Aa52Mp4nSoMFG+fu 8yhq9V0HjnqY8dSlxhJkWKUzTQ== X-Google-Smtp-Source: ABdhPJzuIslR7e62msxXDGKisOMK2+YPFnREc28H4X8PEniBM44xQHZDnA6eym9Q3LGIpL0Gxsuc1Q== X-Received: by 2002:a17:907:7d89:b0:6e7:fdc1:255b with SMTP id oz9-20020a1709077d8900b006e7fdc1255bmr1986753ejc.340.1649140519232; Mon, 04 Apr 2022 23:35:19 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-201-27.adslplus.ch. [188.155.201.27]) by smtp.gmail.com with ESMTPSA id bs7-20020a056402304700b004197e5d2350sm6086543edb.54.2022.04.04.23.35.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 04 Apr 2022 23:35:18 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Greg Kroah-Hartman , Mark Brown , linux-arm-msm@vger.kernel.org, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-spi@vger.kernel.org Cc: Kuldeep Singh , Krzysztof Kozlowski , Rob Herring Subject: [PATCH v4 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema Date: Tue, 5 Apr 2022 08:34:51 +0200 Message-Id: <20220405063451.12011-10-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220405063451.12011-1-krzysztof.kozlowski@linaro.org> References: <20220405063451.12011-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Convert the Qualcomm General Serial Bus Interface (GSBI) to DT Schema. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring --- .../bindings/soc/qcom/qcom,gsbi.txt | 87 ------------ .../bindings/soc/qcom/qcom,gsbi.yaml | 132 ++++++++++++++++++ 2 files changed, 132 insertions(+), 87 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt deleted file mode 100644 index fe1855f09dcc..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ /dev/null @@ -1,87 +0,0 @@ -QCOM GSBI (General Serial Bus Interface) Driver - -The GSBI controller is modeled as a node with zero or more child nodes, each -representing a serial sub-node device that is mux'd as part of the GSBI -configuration settings. The mode setting will govern the input/output mode of -the 4 GSBI IOs. - -Required properties: -- compatible: Should contain "qcom,gsbi-v1.0.0" -- cell-index: Should contain the GSBI index -- reg: Address range for GSBI registers -- clocks: required clock -- clock-names: must contain "iface" entry -- qcom,mode : indicates MUX value for configuration of the serial interface. - Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values. - -Optional properties: -- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference - dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. -- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses - dma. - -Required properties if child node exists: -- #address-cells: Must be 1 -- #size-cells: Must be 1 -- ranges: Must be present - -Properties for children: - -A GSBI controller node can contain 0 or more child nodes representing serial -devices. These serial devices can be a QCOM UART, I2C controller, spi -controller, or some combination of aforementioned devices. - -See the following for child node definitions: -Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt -Documentation/devicetree/bindings/spi/qcom,spi-qup.txt -Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt - -Example for APQ8064: - -#include - - gsbi4@16300000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <4>; - reg = <0x16300000 0x100>; - clocks = <&gcc GSBI4_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - qcom,mode = ; - qcom,crci = ; - - syscon-tcsr = <&tcsr>; - - /* child nodes go under here */ - - i2c_qup4: i2c@16380000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; - - clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - - clock-frequency = <200000>; - - #address-cells = <1>; - #size-cells = <0>; - - }; - - uart4: serial@16340000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16340000 0x1000>, - <0x16300000 0x1000>; - interrupts = <0 152 0x0>; - clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - }; - }; - - tcsr: syscon@1a400000 { - compatible = "qcom,apq8064-tcsr", "syscon"; - reg = <0x1a400000 0x100>; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml new file mode 100644 index 000000000000..c33704333e49 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm General Serial Bus Interface (GSBI) + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The GSBI controller is modeled as a node with zero or more child nodes, each + representing a serial sub-node device that is mux'd as part of the GSBI + configuration settings. The mode setting will govern the input/output mode + of the 4 GSBI IOs. + + A GSBI controller node can contain 0 or more child nodes representing serial + devices. These serial devices can be a QCOM UART, I2C controller, spi + controller, or some combination of aforementioned devices. + +properties: + compatible: + const: qcom,gsbi-v1.0.0 + + '#address-cells': + const: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The GSBI index. + + clocks: + maxItems: 1 + + clock-names: + const: iface + + qcom,crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + CRCI MUX value for QUP CRCI ports. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. + + qcom,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + MUX value for configuration of the serial interface. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid mux values. + + '#size-cells': + const: 1 + + syscon-tcsr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of TCSR syscon node.Required if child uses dma. + + ranges: true + + reg: + maxItems: 1 + +patternProperties: + "spi@[0-9a-f]+$": + type: object + $ref: /schemas/spi/qcom,spi-qup.yaml# + + "i2c@[0-9a-f]+$": + type: object + $ref: /schemas/i2c/qcom,i2c-qup.yaml# + + "serial@[0-9a-f]+$": + type: object + $ref: /schemas/serial/qcom,msm-uartdm.yaml# + +required: + - compatible + - cell-index + - clocks + - clock-names + - qcom,mode + - reg + +additionalProperties: false + +examples: + - | + #include + #include + #include + + gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + qcom,mode = ; + + serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + }; + + i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* UART chosen */ + }; + };