From patchwork Fri Apr 15 11:56:21 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 12814813 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E3D87C43219 for ; Fri, 15 Apr 2022 11:57:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1352754AbiDOL7c (ORCPT ); Fri, 15 Apr 2022 07:59:32 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33106 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1352786AbiDOL71 (ORCPT ); Fri, 15 Apr 2022 07:59:27 -0400 Received: from m-r2.th.seeweb.it (m-r2.th.seeweb.it [5.144.164.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 97BDDA8ED6; Fri, 15 Apr 2022 04:56:57 -0700 (PDT) Received: from localhost.localdomain (abxj52.neoplus.adsl.tpnet.pl [83.9.3.52]) by m-r2.th.seeweb.it (Postfix) with ESMTPA id 480843F73B; Fri, 15 Apr 2022 13:56:55 +0200 (CEST) From: Konrad Dybcio To: ~postmarketos/upstreaming@lists.sr.ht Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 11/23] ARM: dts: qcom-msm8974-klte: Use &labels Date: Fri, 15 Apr 2022 13:56:21 +0200 Message-Id: <20220415115633.575010-12-konrad.dybcio@somainline.org> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415115633.575010-1-konrad.dybcio@somainline.org> References: <20220415115633.575010-1-konrad.dybcio@somainline.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Use &labels to align with the style used in new DTS and apply tiny style fixes. Signed-off-by: Konrad Dybcio --- .../boot/dts/qcom-msm8974-samsung-klte.dts | 1247 ++++++++--------- arch/arm/boot/dts/qcom-msm8974.dtsi | 4 +- 2 files changed, 608 insertions(+), 643 deletions(-) diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index daafc4d31fc5..823dda35fb16 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -13,201 +13,42 @@ / { aliases { serial0 = &blsp1_uart1; mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ + mmc1 = &sdhc_3; /* SDC2 SD card slot */ }; chosen { stdout-path = "serial0:115200n8"; }; - smd { - rpm { - rpm_requests { - pma8084-regulators { - compatible = "qcom,rpm-pma8084-regulators"; - status = "okay"; - - pma8084_s1: s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - }; - - pma8084_s2: s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_s3: s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_s5: s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - - pma8084_s6: s6 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l3: l3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l4: l4 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l9: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l11: l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pma8084_l13: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l15: l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l16: l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pma8084_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l18: l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l19: l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l21: l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l22: l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l23: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - pma8084_l24: l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pma8084_l25: l25 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - }; - - pma8084_l26: l26 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l27: l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_lvs1: lvs1 {}; - pma8084_lvs2: lvs2 {}; - pma8084_lvs3: lvs3 {}; - pma8084_lvs4: lvs4 {}; - - pma8084_5vs1: 5vs1 {}; - }; - }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + + home-key { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; }; }; @@ -315,594 +156,718 @@ vreg_panel: panel-regulator { }; /delete-node/ vreg-boost; - - adsp-pil { - cx-supply = <&pma8084_s2>; - }; }; -&soc { - serial@f991e000 { - status = "okay"; - }; +&blsp1_i2c2 { + status = "okay"; - /* blsp2_uart2 */ - serial@f995e000 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_pins_active>; - pinctrl-1 = <&blsp2_uart2_pins_sleep>; + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; - bluetooth { - compatible = "brcm,bcm43540-bt"; - max-speed = <3000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pins>; - device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&tlmm>; - interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wakeup"; - }; - }; + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - gpio-keys { - compatible = "gpio-keys"; + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; + pinctrl-0 = <&touch_pin>; - volume-down { - label = "volume_down"; - gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - debounce-interval = <15>; - }; + syna,startup-delay-ms = <100>; - home-key { - label = "home_key"; - gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - wakeup-source; - debounce-interval = <15>; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; }; - volume-up { - label = "volume_up"; - gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - debounce-interval = <15>; + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; }; }; +}; - pinctrl@fd510000 { - blsp2_uart2_pins_active: blsp2-uart2-pins-active { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "blsp_uart8"; - drive-strength = <8>; - bias-disable; - }; +&blsp1_i2c6 { + status = "okay"; - blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; - bt_pins: bt-pins { - hostwake { - pins = "gpio75"; - function = "gpio"; - drive-strength = <16>; - input-enable; + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; }; - devwake { - pins = "gpio91"; - function = "gpio"; - drive-strength = <2>; + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; }; - }; - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <4>; - bias-disable; + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; }; - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <4>; - bias-pull-up; + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - }; - sdhc2_pin_a: sdhc2-pin-active { - clk-cmd-data { - pins = "gpio35", "gpio36", "gpio37", "gpio38", - "gpio39", "gpio40"; - function = "sdc3"; - drive-strength = <8>; - bias-disable; + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - }; - sdhc2_cd_pin: sdhc2-cd { - pins = "gpio62"; - function = "gpio"; + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; - drive-strength = <2>; - bias-disable; - }; + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; }; - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - }; - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; - drive-strength = <2>; - bias-disable; + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; }; - }; - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; - drive-strength = <2>; - bias-disable; + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; - }; - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - drive-strength = <2>; - bias-disable; + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - }; - i2c_touchkey_pins: i2c-touchkey { - mux { - pins = "gpio95", "gpio96"; - function = "gpio"; - input-enable; - bias-pull-up; + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; }; - }; - i2c_led_gpioex_pins: i2c-led-gpioex { - mux { - pins = "gpio120", "gpio121"; - function = "gpio"; - input-enable; - bias-pull-down; + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; }; }; + }; +}; - gpioex_pin: gpioex { - res { - pins = "gpio145"; - function = "gpio"; +&blsp1_uart2 { + status = "okay"; +}; - bias-pull-up; - drive-strength = <2>; - }; - }; +&blsp2_i2c6 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; +}; + +&blsp2_uart2 { + status = "okay"; - wifi_pin: wifi { - int { - pins = "gpio92"; - function = "gpio"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_pins_active>; + pinctrl-1 = <&blsp2_uart2_pins_sleep>; - input-enable; - bias-pull-down; + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&tlmm>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; + }; +}; - panel_te_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; - drive-strength = <2>; - bias-disable; - }; +&dsi0_phy { + status = "okay"; + + vddio-supply = <&pma8084_l12>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; }; }; +}; - sdhci@f9824900 { - status = "okay"; +&pma8084_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = ; + }; - vmmc-supply = <&pma8084_l20>; - vqmmc-supply = <&pma8084_s4>; + touchkey_pin: touchkey-int-pin { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; + }; - bus-width = <8>; - non-removable; + touch_pin: touchscreen-int-pin { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + panel_en_pin: panel-en-pin { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = ; + qcom,drive-strength = ; }; - sdhci@f9864900 { - status = "okay"; + wlan_sleep_clk_pin: wlan-sleep-clk-pin { + pins = "gpio16"; + function = "func2"; - max-frequency = <100000000>; + output-high; + power-source = ; + qcom,drive-strength = ; + }; - vmmc-supply = <&pma8084_l21>; - vqmmc-supply = <&pma8084_l13>; + panel_rst_pin: panel-rst-pin { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = ; + qcom,drive-strength = ; + }; - bus-width = <4>; - /* cd-gpio is intentionally disabled. If enabled, an SD card - * present during boot is not initialized correctly. Without - * cd-gpios the driver resorts to polling, so hotplug works. - */ - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; - // cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + fuelgauge_pin: fuelgauge-int-pin { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = ; }; +}; - sdhci@f98a4900 { - status = "okay"; +&remoteproc_adsp { + cx-supply = <&pma8084_s2>; +}; - #address-cells = <1>; - #size-cells = <0>; +&remoteproc_mss { + cx-supply = <&pma8084_s2>; + mss-supply = <&pma8084_s6>; + mx-supply = <&pma8084_s1>; + pll-supply = <&pma8084_l12>; +}; - max-frequency = <100000000>; +&rpm_requests { + pma8084-regulators { + compatible = "qcom,rpm-pma8084-regulators"; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pma8084_s4>; + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - bus-width = <4>; - non-removable; + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; - wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - interrupt-parent = <&tlmm>; - interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; }; - }; - usb@f9a55000 { - status = "okay"; + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - /*extcon = <&smbb>, <&usb_id>;*/ - /*vbus-supply = <&chg_otg>;*/ + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; - hnp-disable; - srp-disable; - adp-disable; + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; - ulpi { - phy@a { - status = "okay"; + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; - v1p8-supply = <&pma8084_l6>; - v3p3-supply = <&pma8084_l24>; + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - /*extcon = <&smbb>;*/ - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - }; - i2c@f9924000 { - status = "okay"; + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - touchscreen@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - interrupt-parent = <&pma8084_gpios>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - vdd-supply = <&max77826_ldo13>; - vio-supply = <&pma8084_lvs2>; + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - syna,startup-delay-ms = <100>; + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - #address-cells = <1>; - #size-cells = <0>; + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; }; - }; - i2c@f9928000 { - status = "okay"; + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - - pmic@60 { - reg = <0x60>; - compatible = "maxim,max77826"; - - regulators { - max77826_ldo1: LDO1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo2: LDO2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - max77826_ldo3: LDO3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo4: LDO4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo5: LDO5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo6: LDO6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo7: LDO7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo8: LDO8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo9: LDO9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo10: LDO10 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo11: LDO11 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo12: LDO12 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo13: LDO13 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo14: LDO14 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo15: LDO15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_buck: BUCK { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - max77826_buckboost: BUCKBOOST { - regulator-min-microvolt = <3400000>; - regulator-max-microvolt = <3400000>; - }; - }; + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; }; - }; - i2c@f9968000 { - status = "okay"; + pma8084_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; - fuelgauge@36 { - compatible = "maxim,max17048"; - reg = <0x36>; + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x56>; + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - interrupt-parent = <&pma8084_gpios>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; +}; + +&sdhc_2 { + status = "okay"; + max-frequency = <100000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_pin_a>; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + + non-removable; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; }; +}; - adreno@fdb00000 { - status = "ok"; +&sdhc_3 { + status = "okay"; + max-frequency = <100000000>; + + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + /* + * cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; + /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ +}; + +&tlmm { + blsp2_uart2_pins_active: blsp2-uart2-pins-active { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; }; - mdss@fd900000 { - status = "ok"; + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; - mdp@fd900000 { - status = "ok"; + bt_pins: bt-pins { + hostwake { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + input-enable; }; - dsi@fd922800 { - status = "ok"; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; + devwake { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; - #address-cells = <1>; - #size-cells = <0>; + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; - panel: panel@0 { - reg = <0>; - compatible = "samsung,s6e3fa2"; + sdhc2_pin_a: sdhc2-pin-active { + clk-cmd-data { + pins = "gpio35", "gpio36", "gpio37", "gpio38", + "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + }; - pinctrl-names = "default"; - pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + sdhc2_cd_pin: sdhc2-cd { + pins = "gpio62"; + function = "gpio"; - iovdd-supply = <&pma8084_lvs4>; - vddr-supply = <&vreg_panel>; + drive-strength = <2>; + bias-disable; + }; - reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + sdhc3_pin_a: sdhc3-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; }; + }; - dsi-phy@fd922a00 { - status = "ok"; + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; - vddio-supply = <&pma8084_l12>; + drive-strength = <2>; + bias-disable; }; }; - remoteproc@fc880000 { - cx-supply = <&pma8084_s2>; - mss-supply = <&pma8084_s6>; - mx-supply = <&pma8084_s1>; - pll-supply = <&pma8084_l12>; + i2c6_pins: i2c6 { + mux { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; }; -}; -&spmi_bus { - pma8084@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio5"; - function = "normal"; + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; - bias-pull-up; - power-source = ; - }; + drive-strength = <2>; + bias-disable; + }; + }; - touchkey_pin: touchkey-int-pin { - pins = "gpio6"; - function = "normal"; - bias-disable; - input-enable; - power-source = ; - }; + i2c_touchkey_pins: i2c-touchkey { + mux { + pins = "gpio95", "gpio96"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + }; - touch_pin: touchscreen-int-pin { - pins = "gpio8"; - function = "normal"; - bias-disable; - input-enable; - power-source = ; - }; + i2c_led_gpioex_pins: i2c-led-gpioex { + mux { + pins = "gpio120", "gpio121"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + }; - panel_en_pin: panel-en-pin { - pins = "gpio14"; - function = "normal"; - bias-pull-up; - power-source = ; - qcom,drive-strength = ; - }; + gpioex_pin: gpioex { + res { + pins = "gpio145"; + function = "gpio"; - wlan_sleep_clk_pin: wlan-sleep-clk-pin { - pins = "gpio16"; - function = "func2"; + bias-pull-up; + drive-strength = <2>; + }; + }; - output-high; - power-source = ; - qcom,drive-strength = ; - }; + wifi_pin: wifi { + int { + pins = "gpio92"; + function = "gpio"; - panel_rst_pin: panel-rst-pin { - pins = "gpio17"; - function = "normal"; - bias-disable; - power-source = ; - qcom,drive-strength = ; - }; + input-enable; + bias-pull-down; + }; + }; + panel_te_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; - fuelgauge_pin: fuelgauge-int-pin { - pins = "gpio21"; - function = "normal"; - bias-disable; - input-enable; - power-source = ; - }; + drive-strength = <2>; + bias-disable; }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 6071f5eeba74..3370d48e9ad9 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -339,7 +339,7 @@ timer { clock-frequency = <19200000>; }; - adsp-pil { + remoteproc_adsp: adsp-pil { compatible = "qcom,msm8974-adsp-pil"; interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, @@ -840,7 +840,7 @@ rng@f9bff000 { clock-names = "core"; }; - remoteproc@fc880000 { + remoteproc_mss: remoteproc@fc880000 { compatible = "qcom,msm8974-mss-pil"; reg = <0xfc880000 0x100>, <0xfc820000 0x020>; reg-names = "qdsp6", "rmb";