[13/23] ARM: dts: qcom-msm8974-castor: Use &labels

Message ID	20220415115633.575010-14-konrad.dybcio@somainline.org (mailing list archive)
State	Accepted
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Konrad Dybcio <konrad.dybcio@somainline.org> To: ~postmarketos/upstreaming@lists.sr.ht Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio <konrad.dybcio@somainline.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 13/23] ARM: dts: qcom-msm8974-castor: Use &labels Date: Fri, 15 Apr 2022 13:56:23 +0200 Message-Id: <20220415115633.575010-14-konrad.dybcio@somainline.org> In-Reply-To: <20220415115633.575010-1-konrad.dybcio@somainline.org> References: <20220415115633.575010-1-konrad.dybcio@somainline.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	[01/23] ARM: dts: qcom--sony: Mention SONY board names in DT filenames \| expand [01/23] ARM: dts: qcom--sony: Mention SONY board names in DT filenames [02/23] ARM: dts: qcom-msm8974: Remove properties that are always overriden [03/23] ARM: dts: qcom-msm8974: Fix UART naming [04/23] ARM: dts: qcom-msm8974: Fix I2C labels [05/23] ARM: dts: qcom-msm8974: Fix up mdss nodes [06/23] ARM: dts: qcom-msm8974: Fix up SDHCI nodes [07/23] ARM: dts: qcom-msm8974: Rename msmgpio to tlmm [08/23] ARM: dts: qcom-apq8074-dragonboard: Use &labels [09/23] ARM: dts: qcom-msm8974-fp2: Use &labels [10/23] ARM: dts: qcom-msm8974-lge-nexus5: Use &labels [11/23] ARM: dts: qcom-msm8974-klte: Use &labels [12/23] ARM: dts: qcom-msm8974-{"hon","am"}ami: Commonize and modernize the DTs [13/23] ARM: dts: qcom-msm8974-castor: Use &labels [14/23] ARM: dts: qcom-msm8974pro: Use &labels [15/23] ARM: dts: qcom-msm8974pro-: Use the 8974pro name in DT filenames [16/23] ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device [17/23] ARM: dts: qcom-msm8974: Sort and clean up nodes [18/23] ARM: dts: qcom-msm8974: Enable IMEM unconditionally [19/23] ARM: dts: qcom-msm8974: Consolidate I2C/UART/SDHCI [20/23] ARM: dts: qcom-msm8974: Clean up old GPIO declarations [21/23] ARM: dts: qcom-msm8974-rhine: Add NFC and enable I2C hosts [22/23] ARM: dts: qcom-msm8974-rhine: Add pstore node [23/23] ARM: dts: qcom-msm8974: Remove unnecessary include

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-shinano-castor.dts index d77540205594..687f6149268c 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-shinano-castor.dts @@ -53,186 +53,6 @@ volume-up { }; }; - smd { - rpm { - rpm_requests { - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-system-load = <154000>; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-allow-set-load; - regulator-system-load = <500000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; - vreg_bl_vddio: lcd-backlight-vddio { compatible = "regulator-fixed"; regulator-name = "vreg_bl_vddio"; @@ -277,447 +97,601 @@ vreg_wlan: wlan-regulator { }; }; -&soc { - sdhci@f9824900 { - status = "okay"; +&blsp1_uart2 { + status = "okay"; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_pin_a>; +}; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; +&blsp2_i2c2 { + status = "okay"; + clock-frequency = <355000>; - sdhci@f9864900 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_pins>; - max-frequency = <100000000>; - non-removable; - vmmc-supply = <&vreg_wlan>; + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; + interrupt-parent = <&tlmm>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; #address-cells = <1>; #size-cells = <0>; - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; - brcm,drive-strength = <10>; + syna,startup-delay-ms = <10>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; }; - }; - sdhci@f98a4900 { - status = "okay"; + rmi-f11@11 { + reg = <0x11>; + syna,f11-flip-x = <1>; + syna,sensor-type = <1>; + }; + }; +}; - bus-width = <4>; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_pins>; - cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + rom_a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom_a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom_a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom_a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom_a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom_a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom_a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom_a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom_a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom_aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom_aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; }; +}; + +&blsp2_uart1 { + status = "okay"; - serial@f991e000 { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart7_pin_a>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; + pinctrl-0 = <&bt_host_wake_pin>, + <&bt_dev_wake_pin>, + <&bt_reg_on_pin>; + + host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; }; +}; - serial@f995d000 { - status = "ok"; +&otg { + status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart7_pin_a>; + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; + hnp-disable; + srp-disable; + adp-disable; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin>, - <&bt_dev_wake_pin>, - <&bt_reg_on_pin>; + ulpi { + phy@a { + status = "okay"; - host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; }; }; +}; - usb@f9a55000 { - status = "okay"; +&pm8941_coincell { + status = "okay"; - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; - hnp-disable; - srp-disable; - adp-disable; +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio5"; + function = "normal"; - ulpi { - phy@a { - status = "okay"; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; + bt_reg_on_pin: bt-reg-on { + pins = "gpio16"; + function = "normal"; - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; + output-low; + power-source = <PM8941_GPIO_S3>; }; - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio17"; + function = "func2"; - drive-strength = <2>; - bias-pull-up; - }; + output-high; + power-source = <PM8941_GPIO_S3>; + }; - tx { - pins = "gpio4"; - function = "blsp_uart2"; + wlan_regulator_pin: wl-reg-active { + pins = "gpio18"; + function = "normal"; - drive-strength = <4>; - bias-disable; - }; - }; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; - blsp2_uart7_pin_a: blsp2-uart7-pin-active { - tx { - pins = "gpio41"; - function = "blsp_uart7"; + lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + pins = "gpio20"; + function = "normal"; - drive-strength = <2>; - bias-disable; - }; + bias-disable; + power-source = <PM8941_GPIO_S3>; + input-disable; + output-low; + }; - rx { - pins = "gpio42"; - function = "blsp_uart7"; +}; - drive-strength = <2>; - bias-pull-up; - }; +&rpm_requests { + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - cts { - pins = "gpio43"; - function = "blsp_uart7"; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; - drive-strength = <2>; - bias-pull-up; - }; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + regulator-always-on; + regulator-boot-on; + }; - rts { - pins = "gpio44"; - function = "blsp_uart7"; + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - drive-strength = <2>; - bias-disable; - }; + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; }; - i2c8_pins: i2c8 { - mux { - pins = "gpio47", "gpio48"; - function = "blsp_i2c8"; + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; - drive-strength = <2>; - bias-disable; - }; + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; }; - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - drive-strength = <2>; - bias-disable; - }; + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - lcd_backlight_en_pin_a: lcd-backlight-vddio { - pins = "gpio69"; - drive-strength = <10>; - output-low; - bias-disable; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - drive-strength = <2>; - bias-disable; - }; + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; }; - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "gpio40"; - function = "sdc3"; + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - drive-strength = <10>; - bias-disable; - }; + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; - cmd { - pins = "gpio39"; - function = "sdc3"; + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; - drive-strength = <10>; - bias-pull-up; - }; + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; - data { - pins = "gpio35", "gpio36", "gpio37", "gpio38"; - function = "sdc3"; + pm8941_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; - drive-strength = <10>; - bias-pull-up; - }; + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; + regulator-boot-on; }; - ts_int_pin: synaptics { - pin { - pins = "gpio86"; - function = "gpio"; + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - drive-strength = <2>; - bias-disable; - input-enable; - }; + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; }; - bt_host_wake_pin: bt-host-wake { - pins = "gpio95"; - function = "gpio"; + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; - drive-strength = <2>; - bias-disable; - output-low; + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; + }; +}; - bt_dev_wake_pin: bt-dev-wake { - pins = "gpio96"; - function = "gpio"; +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + blsp1_uart2_pin_a: blsp1-uart2-pin-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + + drive-strength = <4>; bias-disable; }; }; - i2c@f9964000 { - status = "okay"; + blsp2_uart7_pin_a: blsp2-uart7-pin-active { + tx { + pins = "gpio41"; + function = "blsp_uart7"; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_pins>; + drive-strength = <2>; + bias-disable; + }; - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; + rx { + pins = "gpio42"; + function = "blsp_uart7"; - interrupt-parent = <&tlmm>; - interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + drive-strength = <2>; + bias-pull-up; + }; - #address-cells = <1>; - #size-cells = <0>; + cts { + pins = "gpio43"; + function = "blsp_uart7"; - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; + drive-strength = <2>; + bias-pull-up; + }; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; + rts { + pins = "gpio44"; + function = "blsp_uart7"; - syna,startup-delay-ms = <10>; + drive-strength = <2>; + bias-disable; + }; + }; - rmi-f01@1 { - reg = <0x1>; - syna,nosleep = <1>; - }; + i2c8_pins: i2c8 { + mux { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; - rmi-f11@11 { - reg = <0x11>; - syna,f11-flip-x = <1>; - syna,sensor-type = <1>; - }; + drive-strength = <2>; + bias-disable; }; }; - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - lp8566_wled: backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - power-supply = <&vreg_bl_vddio>; - - bl-name = "backlight"; - dev-ctrl = /bits/ 8 <0x05>; - init-brt = /bits/ 8 <0x3f>; - rom_a0h { - rom-addr = /bits/ 8 <0xa0>; - rom-val = /bits/ 8 <0xff>; - }; - rom_a1h { - rom-addr = /bits/ 8 <0xa1>; - rom-val = /bits/ 8 <0x3f>; - }; - rom_a2h { - rom-addr = /bits/ 8 <0xa2>; - rom-val = /bits/ 8 <0x20>; - }; - rom_a3h { - rom-addr = /bits/ 8 <0xa3>; - rom-val = /bits/ 8 <0x5e>; - }; - rom_a4h { - rom-addr = /bits/ 8 <0xa4>; - rom-val = /bits/ 8 <0x02>; - }; - rom_a5h { - rom-addr = /bits/ 8 <0xa5>; - rom-val = /bits/ 8 <0x04>; - }; - rom_a6h { - rom-addr = /bits/ 8 <0xa6>; - rom-val = /bits/ 8 <0x80>; - }; - rom_a7h { - rom-addr = /bits/ 8 <0xa7>; - rom-val = /bits/ 8 <0xf7>; - }; - rom_a9h { - rom-addr = /bits/ 8 <0xa9>; - rom-val = /bits/ 8 <0x80>; - }; - rom_aah { - rom-addr = /bits/ 8 <0xaa>; - rom-val = /bits/ 8 <0x0f>; - }; - rom_aeh { - rom-addr = /bits/ 8 <0xae>; - rom-val = /bits/ 8 <0x0f>; - }; + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + + drive-strength = <2>; + bias-disable; }; }; -}; -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; + lcd_backlight_en_pin_a: lcd-backlight-vddio { + pins = "gpio69"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; }; - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio5"; - function = "normal"; + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; - bt_reg_on_pin: bt-reg-on { - pins = "gpio16"; - function = "normal"; + drive-strength = <2>; + bias-disable; + }; - output-low; - power-source = <PM8941_GPIO_S3>; - }; + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio17"; - function = "func2"; + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; - output-high; - power-source = <PM8941_GPIO_S3>; - }; + sdhc3_pin_a: sdhc3-pin-active { + clk { + pins = "gpio40"; + function = "sdc3"; - wlan_regulator_pin: wl-reg-active { - pins = "gpio18"; - function = "normal"; + drive-strength = <10>; + bias-disable; + }; - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; + cmd { + pins = "gpio39"; + function = "sdc3"; - lcd_dcdc_en_pin_a: lcd-dcdc-en-active { - pins = "gpio20"; - function = "normal"; + drive-strength = <10>; + bias-pull-up; + }; - bias-disable; - power-source = <PM8941_GPIO_S3>; - input-disable; - output-low; - }; + data { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; }; + }; - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; + ts_int_pin: synaptics { + pin { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; }; }; + + bt_host_wake_pin: bt-host-wake { + pins = "gpio95"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-low; + }; + + bt_dev_wake_pin: bt-dev-wake { + pins = "gpio96"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; };

[13/23] ARM: dts: qcom-msm8974-castor: Use &labels

Commit Message

Patch