diff mbox series

[20/23] ARM: dts: qcom-msm8974*: Clean up old GPIO declarations

Message ID 20220415115633.575010-21-konrad.dybcio@somainline.org (mailing list archive)
State Accepted
Headers show
Series [01/23] ARM: dts: qcom-*-sony*: Mention SONY board names in DT filenames | expand

Commit Message

Konrad Dybcio April 15, 2022, 11:56 a.m. UTC 
Remove unneeded level of nesting, as it does not match the current DTS
style.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    | 21 +++-----
 .../dts/qcom-msm8974-sony-xperia-rhine.dtsi   | 13 ++---
 .../boot/dts/qcom-msm8974pro-samsung-klte.dts | 53 +++++++------------
 3 files changed, 33 insertions(+), 54 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 7e4e723f1dc3..52b3f055e834 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -573,12 +573,10 @@  cmd-data {
 	};
 
 	mpu6515_pin: mpu6515 {
-		irq {
-			pins = "gpio73";
-			function = "gpio";
-			bias-disable;
-			input-enable;
-		};
+		pins = "gpio73";
+		function = "gpio";
+		bias-disable;
+		input-enable;
 	};
 
 	touch_pin: touch {
@@ -601,13 +599,10 @@  reset {
 	};
 
 	panel_pin: panel {
-		te {
-			pins = "gpio12";
-			function = "mdp_vsync";
-
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	bt_pin: bt {
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index c2e423d2a21e..1120972ae4d2 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -375,14 +375,11 @@  &smbb {
 
 &tlmm {
 	ts_int_pin: touch-int {
-		pin {
-			pins = "gpio61";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-			input-enable;
-		};
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
 	};
 
 	sdc1_on: sdc1-on {
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index f230a657d0f3..7c7ad9e7baa6 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -780,50 +780,37 @@  cmd-data {
 	};
 
 	i2c_touchkey_pins: i2c-touchkey {
-		mux {
-			pins = "gpio95", "gpio96";
-			function = "gpio";
-			input-enable;
-			bias-pull-up;
-		};
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
 	};
 
 	i2c_led_gpioex_pins: i2c-led-gpioex {
-		mux {
-			pins = "gpio120", "gpio121";
-			function = "gpio";
-			input-enable;
-			bias-pull-down;
-		};
+		pins = "gpio120", "gpio121";
+		function = "gpio";
+		input-enable;
+		bias-pull-down;
 	};
 
 	gpioex_pin: gpioex {
-		res {
-			pins = "gpio145";
-			function = "gpio";
-
-			bias-pull-up;
-			drive-strength = <2>;
-		};
+		pins = "gpio145";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
 	};
 
 	wifi_pin: wifi {
-		int {
-			pins = "gpio92";
-			function = "gpio";
-
-			input-enable;
-			bias-pull-down;
-		};
+		pins = "gpio92";
+		function = "gpio";
+		input-enable;
+		bias-pull-down;
 	};
 
 	panel_te_pin: panel {
-		te {
-			pins = "gpio12";
-			function = "mdp_vsync";
-
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };