diff mbox series

[v4,4/4] ARM: dts: qcom: ipq8064: Use generic node name for DMA

Message ID 20220421171809.32722-5-singh.kuldeep87k@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v4,1/4] ARM: dts: qcom: apq8064: Use generic node name for DMA | expand

Commit Message

Kuldeep Singh April 21, 2022, 5:18 p.m. UTC 
Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 8cb04aa8ed2f..7e68d4b1527f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1155,7 +1155,7 @@  vsdcc_fixed: vsdcc-regulator {
 			regulator-always-on;
 		};
 
-		sdcc1bam: dma@12402000 {
+		sdcc1bam: dma-controller@12402000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1165,7 +1165,7 @@  sdcc1bam: dma@12402000 {
 			qcom,ee = <0>;
 		};
 
-		sdcc3bam: dma@12182000 {
+		sdcc3bam: dma-controller@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;