| Message ID | 20220421214243.352469-1-luca@z3ntu.xyz (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 88044abcde58ebf810f4be49ee2555ecc333bad4 |
| Headers | show |
| Series | [1/3] ARM: dts: msm8974-FP2: Add support for touchscreen | expand |
Hello: This series was applied to qcom/linux.git (for-next) by Bjorn Andersson <bjorn.andersson@linaro.org>: On Thu, 21 Apr 2022 23:42:41 +0200 you wrote: > Configure the touchscreen found on the new display module of the FP2. > To add some detail, FP2 has two different screen/touchscreen variants > ("display module"), the old module has Synaptics touchscreen, the new > one this Ilitek touchscreen. > > We're only supporting the new display module for now. > > [...] Here is the summary with links: - [1/3] ARM: dts: msm8974-FP2: Add support for touchscreen https://git.kernel.org/qcom/c/88044abcde58 - [2/3] ARM: dts: msm8974-FP2: Configure charger https://git.kernel.org/qcom/c/da281bf9345a - [3/3] ARM: dts: msm8974-FP2: Add supplies for remoteprocs https://git.kernel.org/qcom/c/fb5e339fb1bc You are awesome, thank you!
On Thu, 21 Apr 2022 23:42:41 +0200, Luca Weiss wrote: > Configure the touchscreen found on the new display module of the FP2. > To add some detail, FP2 has two different screen/touchscreen variants > ("display module"), the old module has Synaptics touchscreen, the new > one this Ilitek touchscreen. > > We're only supporting the new display module for now. > > [...] Applied, thanks! [1/3] ARM: dts: msm8974-FP2: Add support for touchscreen commit: 88044abcde58ebf810f4be49ee2555ecc333bad4 [2/3] ARM: dts: msm8974-FP2: Configure charger commit: da281bf9345a8bcde224976b83d6ad7899830e97 [3/3] ARM: dts: msm8974-FP2: Add supplies for remoteprocs commit: fb5e339fb1bc9eb7f34b341d995e4ab39c03588e Best regards,
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts index 96427d75ea82..8f07d8e363aa 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts @@ -57,6 +57,21 @@ vibrator { }; }; +&blsp1_i2c2 { + status = "okay"; + + touchscreen@41 { + compatible = "ilitek,ili2120"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + &blsp1_uart2 { status = "okay"; };
Configure the touchscreen found on the new display module of the FP2. To add some detail, FP2 has two different screen/touchscreen variants ("display module"), the old module has Synaptics touchscreen, the new one this Ilitek touchscreen. We're only supporting the new display module for now. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- .../boot/dts/qcom-msm8974pro-fairphone-fp2.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)