| Message ID | 20220421214243.352469-2-luca@z3ntu.xyz (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | da281bf9345a8bcde224976b83d6ad7899830e97 |
| Headers | show |
| Series | [1/3] ARM: dts: msm8974-FP2: Add support for touchscreen | expand |
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts index 8f07d8e363aa..34266126d5a2 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts @@ -397,6 +397,16 @@ &sdhc_2 { pinctrl-1 = <&sdc2_off>; }; +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,fast-charge-safe-voltage = <4380000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + qcom,minimum-input-voltage = <4450000>; +}; + &tlmm { panel_pin: panel { te {
Set the relevant properties on the smbb charger to allow the device to charge properly. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)