Message ID | 20220507224645.2238421-1-marijn.suijten@somainline.org (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | arm64: dts: qcom: sm6350: Replace literal rpmpd indices with constants | expand |
On 8.05.2022 00:46, Marijn Suijten wrote: > It seems the SM6350_CX definition was temporarily replaced with its > literal value 0 in 1797e1c9a95c ("arm64: dts: qcom: sm6350: Add SDHCI1/2 > nodes") to prevent a dependency on the qcom-rpmpd.h header patch being > available prior to this DT patch being applied, similar to c23f1b77358c > ("arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX"). > However, unlike the revert of that in the sm6125 tree the next merge > window around in a90b8adfa2dd ("Revert "arm64: dts: qcom: sm6125: Avoid > using missing SM6125_VDDCX""), this has not yet happened for sm6350: > replace them back now that the definitions are definitely available. > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi > index fb1a0f662575..b3160720edcb 100644 > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi > @@ -489,7 +489,7 @@ sdhc_1: sdhci@7c4000 { > clock-names = "iface", "core", "xo"; > qcom,dll-config = <0x000f642c>; > qcom,ddr-config = <0x80040868>; > - power-domains = <&rpmhpd 0>; > + power-domains = <&rpmhpd SM6350_CX>; > operating-points-v2 = <&sdhc1_opp_table>; > bus-width = <8>; > non-removable; > @@ -935,7 +935,7 @@ sdhc_2: sdhci@8804000 { > clock-names = "iface", "core", "xo"; > qcom,dll-config = <0x0007642c>; > qcom,ddr-config = <0x80040868>; > - power-domains = <&rpmhpd 0>; > + power-domains = <&rpmhpd SM6350_CX>; > operating-points-v2 = <&sdhc2_opp_table>; > bus-width = <4>; >
Note that the title should have been rpmHpd, apologies for that typo. On 2022-05-08 00:46:45, Marijn Suijten wrote: > It seems the SM6350_CX definition was temporarily replaced with its > literal value 0 in 1797e1c9a95c ("arm64: dts: qcom: sm6350: Add SDHCI1/2 > nodes") to prevent a dependency on the qcom-rpmpd.h header patch being > available prior to this DT patch being applied, similar to c23f1b77358c > ("arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX"). > However, unlike the revert of that in the sm6125 tree the next merge > window around in a90b8adfa2dd ("Revert "arm64: dts: qcom: sm6125: Avoid > using missing SM6125_VDDCX""), this has not yet happened for sm6350: > replace them back now that the definitions are definitely available. > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi > index fb1a0f662575..b3160720edcb 100644 > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi > @@ -489,7 +489,7 @@ sdhc_1: sdhci@7c4000 { > clock-names = "iface", "core", "xo"; > qcom,dll-config = <0x000f642c>; > qcom,ddr-config = <0x80040868>; > - power-domains = <&rpmhpd 0>; > + power-domains = <&rpmhpd SM6350_CX>; > operating-points-v2 = <&sdhc1_opp_table>; > bus-width = <8>; > non-removable; > @@ -935,7 +935,7 @@ sdhc_2: sdhci@8804000 { > clock-names = "iface", "core", "xo"; > qcom,dll-config = <0x0007642c>; > qcom,ddr-config = <0x80040868>; > - power-domains = <&rpmhpd 0>; > + power-domains = <&rpmhpd SM6350_CX>; > operating-points-v2 = <&sdhc2_opp_table>; > bus-width = <4>; > > -- > 2.36.0 >
On Sun, 8 May 2022 00:46:45 +0200, Marijn Suijten wrote: > It seems the SM6350_CX definition was temporarily replaced with its > literal value 0 in 1797e1c9a95c ("arm64: dts: qcom: sm6350: Add SDHCI1/2 > nodes") to prevent a dependency on the qcom-rpmpd.h header patch being > available prior to this DT patch being applied, similar to c23f1b77358c > ("arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX"). > However, unlike the revert of that in the sm6125 tree the next merge > window around in a90b8adfa2dd ("Revert "arm64: dts: qcom: sm6125: Avoid > using missing SM6125_VDDCX""), this has not yet happened for sm6350: > replace them back now that the definitions are definitely available. > > [...] Applied, thanks! [1/1] arm64: dts: qcom: sm6350: Replace literal rpmpd indices with constants commit: 7a9016dbc8760c4f8a610e5cb0ae0f815b0cca81 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index fb1a0f662575..b3160720edcb 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -489,7 +489,7 @@ sdhc_1: sdhci@7c4000 { clock-names = "iface", "core", "xo"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd 0>; + power-domains = <&rpmhpd SM6350_CX>; operating-points-v2 = <&sdhc1_opp_table>; bus-width = <8>; non-removable; @@ -935,7 +935,7 @@ sdhc_2: sdhci@8804000 { clock-names = "iface", "core", "xo"; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd 0>; + power-domains = <&rpmhpd SM6350_CX>; operating-points-v2 = <&sdhc2_opp_table>; bus-width = <4>;
It seems the SM6350_CX definition was temporarily replaced with its literal value 0 in 1797e1c9a95c ("arm64: dts: qcom: sm6350: Add SDHCI1/2 nodes") to prevent a dependency on the qcom-rpmpd.h header patch being available prior to this DT patch being applied, similar to c23f1b77358c ("arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX"). However, unlike the revert of that in the sm6125 tree the next merge window around in a90b8adfa2dd ("Revert "arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX""), this has not yet happened for sm6350: replace them back now that the definitions are definitely available. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)