[2/3] arm64: dts: qcom: sm6125: Append -state suffix to pinctrl nodes

Commit Message

Marijn Suijten May 8, 2022, 10:03 a.m. UTC

According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be
suffixed by -state:

    qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

The label names have been updated to match, going from sdc2_state_X to
sdc2_X_state.

Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <[e-mail]>
---
 .../boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts     | 4 ++--
 arch/arm64/boot/dts/qcom/sm6125.dtsi                      | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 4916e6c8b625..038970c0b68e 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -88,7 +88,7 @@  &hsusb_phy1 {
 	status = "okay";
 };
 
-&sdc2_state_off {
+&sdc2_off_state {
 	sd-cd {
 		pins = "gpio98";
 		drive-strength = <2>;
@@ -96,7 +96,7 @@  sd-cd {
 	};
 };
 
-&sdc2_state_on {
+&sdc2_on_state {
 	sd-cd {
 		pins = "gpio98";
 		drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 3fadf5196c4d..e601b9bfdc04 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -386,7 +386,7 @@  tlmm: pinctrl@500000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			sdc2_state_off: sdc2-off {
+			sdc2_off_state: sdc2-off-state {
 				clk {
 					pins = "sdc2_clk";
 					drive-strength = <2>;
@@ -406,7 +406,7 @@  data {
 				};
 			};
 
-			sdc2_state_on: sdc2-on {
+			sdc2_on_state: sdc2-on-state {
 				clk {
 					pins = "sdc2_clk";
 					drive-strength = <16>;
@@ -490,8 +490,8 @@  sdhc_2: sdhci@4784000 {
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
 
-			pinctrl-0 = <&sdc2_state_on>;
-			pinctrl-1 = <&sdc2_state_off>;
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
 			pinctrl-names = "default", "sleep";
 
 			power-domains = <&rpmpd SM6125_VDDCX>;