@@ -44,12 +44,12 @@ ext_3p3v: regulator-fixed@1 {
gpio-keys {
compatible = "gpio-keys";
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEUP>;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEDOWN>;
@@ -23,28 +23,28 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -11,7 +11,7 @@ / {
keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
@@ -187,12 +187,12 @@ partition@0 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
- button@1 {
+ button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
@@ -65,19 +65,19 @@ sata@29000000 {
status = "okay";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
- button@1 {
+ button-1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
- button@2 {
+ button-2 {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
@@ -24,14 +24,14 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -20,28 +20,28 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -25,7 +25,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CAMERA>;
@@ -33,7 +33,7 @@ camera-snapshot {
debounce-interval = <15>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
@@ -41,7 +41,7 @@ volume-down {
debounce-interval = <15>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@@ -25,7 +25,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -33,7 +33,7 @@ volume-down {
debounce-interval = <15>;
};
- home-key {
+ key-home {
label = "home_key";
gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -42,7 +42,7 @@ home-key {
debounce-interval = <15>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -24,28 +24,28 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 4 ++-- arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts | 8 ++++---- arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 2 +- arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 4 ++-- arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 6 +++--- arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 4 ++-- arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi | 8 ++++---- arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts | 6 +++--- arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts | 6 +++--- .../dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 8 ++++---- 10 files changed, 28 insertions(+), 28 deletions(-)