| Message ID | 20220609120338.4080-4-johan+linaro@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | phy: qcom-qmp: clean up defines | expand |
On 09/06/2022 15:03, Johan Hovold wrote: > Use lower case hex consistently for define values. > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/phy/qualcomm/phy-qcom-qmp.h | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h > index 6d410826ae90..3a4f150dd499 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp.h > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h > @@ -30,7 +30,7 @@ > #define QSERDES_PLL_CP_CTRL_MODE0 0x080 > #define QSERDES_PLL_CP_CTRL_MODE1 0x084 > #define QSERDES_PLL_PLL_RCTRL_MODE0 0x088 > -#define QSERDES_PLL_PLL_RCTRL_MODE1 0x08C > +#define QSERDES_PLL_PLL_RCTRL_MODE1 0x08c > #define QSERDES_PLL_PLL_CCTRL_MODE0 0x090 > #define QSERDES_PLL_PLL_CCTRL_MODE1 0x094 > #define QSERDES_PLL_BIAS_EN_CTRL_BY_PSM 0x0a4 > @@ -44,7 +44,7 @@ > #define QSERDES_PLL_DIV_FRAC_START3_MODE0 0x0e0 > #define QSERDES_PLL_DIV_FRAC_START1_MODE1 0x0e4 > #define QSERDES_PLL_DIV_FRAC_START2_MODE1 0x0e8 > -#define QSERDES_PLL_DIV_FRAC_START3_MODE1 0x0eC > +#define QSERDES_PLL_DIV_FRAC_START3_MODE1 0x0ec > #define QSERDES_PLL_INTEGLOOP_GAIN0_MODE0 0x100 > #define QSERDES_PLL_INTEGLOOP_GAIN1_MODE0 0x104 > #define QSERDES_PLL_INTEGLOOP_GAIN0_MODE1 0x108 > @@ -270,11 +270,11 @@ > #define QPHY_RX_MIN_HIBERN8_TIME 0x140 > #define QPHY_RX_SIGDET_CTRL2 0x148 > #define QPHY_RX_PWM_GEAR_BAND 0x154 > -#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8 > -#define QPHY_OSC_DTCT_ACTIONS 0x1AC > -#define QPHY_RX_SIGDET_LVL 0x1D8 > -#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC > -#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0 > +#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1a8 > +#define QPHY_OSC_DTCT_ACTIONS 0x1ac > +#define QPHY_RX_SIGDET_LVL 0x1d8 > +#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1dc > +#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1e0 > > /* Only for QMP V3 & V4 PHY - DP COM registers */ > #define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00 > @@ -639,7 +639,7 @@ > #define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8 > #define QSERDES_V4_TX_TX_INTERFACE_MODE 0xbc > #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8 > -#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC > +#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdc > #define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0xe0 > #define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0xe4 > #define QSERDES_V4_TX_VMODE_CTRL1 0xe8
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6d410826ae90..3a4f150dd499 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -30,7 +30,7 @@ #define QSERDES_PLL_CP_CTRL_MODE0 0x080 #define QSERDES_PLL_CP_CTRL_MODE1 0x084 #define QSERDES_PLL_PLL_RCTRL_MODE0 0x088 -#define QSERDES_PLL_PLL_RCTRL_MODE1 0x08C +#define QSERDES_PLL_PLL_RCTRL_MODE1 0x08c #define QSERDES_PLL_PLL_CCTRL_MODE0 0x090 #define QSERDES_PLL_PLL_CCTRL_MODE1 0x094 #define QSERDES_PLL_BIAS_EN_CTRL_BY_PSM 0x0a4 @@ -44,7 +44,7 @@ #define QSERDES_PLL_DIV_FRAC_START3_MODE0 0x0e0 #define QSERDES_PLL_DIV_FRAC_START1_MODE1 0x0e4 #define QSERDES_PLL_DIV_FRAC_START2_MODE1 0x0e8 -#define QSERDES_PLL_DIV_FRAC_START3_MODE1 0x0eC +#define QSERDES_PLL_DIV_FRAC_START3_MODE1 0x0ec #define QSERDES_PLL_INTEGLOOP_GAIN0_MODE0 0x100 #define QSERDES_PLL_INTEGLOOP_GAIN1_MODE0 0x104 #define QSERDES_PLL_INTEGLOOP_GAIN0_MODE1 0x108 @@ -270,11 +270,11 @@ #define QPHY_RX_MIN_HIBERN8_TIME 0x140 #define QPHY_RX_SIGDET_CTRL2 0x148 #define QPHY_RX_PWM_GEAR_BAND 0x154 -#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8 -#define QPHY_OSC_DTCT_ACTIONS 0x1AC -#define QPHY_RX_SIGDET_LVL 0x1D8 -#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC -#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0 +#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1a8 +#define QPHY_OSC_DTCT_ACTIONS 0x1ac +#define QPHY_RX_SIGDET_LVL 0x1d8 +#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1dc +#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1e0 /* Only for QMP V3 & V4 PHY - DP COM registers */ #define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00 @@ -639,7 +639,7 @@ #define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8 #define QSERDES_V4_TX_TX_INTERFACE_MODE 0xbc #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8 -#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC +#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdc #define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0xe0 #define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0xe4 #define QSERDES_V4_TX_VMODE_CTRL1 0xe8
Use lower case hex consistently for define values. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)