Message ID | 20220620120101.2906-7-quic_jinlmao@quicinc.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Coresight: Add support for TPDM and TPDA | expand |
On 20/06/2022 13:00, Mao Jinlong wrote: > TPDA(Trace, Profiling and Diagnostics Aggregator) is > to provide packetization, funneling and timestamping of > TPDM data. Multiple monitors are connected to different > input ports of TPDA.This change is to add tpda > enable/disable/probe functions for coresight tpda driver. > > - - - - - - - - - - - - > | TPDM 0| | TPDM 1 | | TPDM 2| > - - - - - - - - - - - - > | | | > |_ _ _ _ _ _ | _ _ _ _ | > | | | > | | | > ------------------ > | TPDA | > ------------------ > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> > --- > drivers/hwtracing/coresight/Kconfig | 11 + > drivers/hwtracing/coresight/Makefile | 1 + > drivers/hwtracing/coresight/coresight-tpda.c | 206 +++++++++++++++++++ > drivers/hwtracing/coresight/coresight-tpda.h | 35 ++++ > 4 files changed, 253 insertions(+) > create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c > create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h > > diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig > index b2b72a35e416..0cbebfd0d23e 100644 > --- a/drivers/hwtracing/coresight/Kconfig > +++ b/drivers/hwtracing/coresight/Kconfig > @@ -205,6 +205,7 @@ config CORESIGHT_TRBE > config CORESIGHT_TPDM > tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver" > select CORESIGHT_LINKS_AND_SINKS > + select CORESIGHT_TPDA > help > This driver provides support for configuring monitor. Monitors are > primarily responsible for data set collection and support the > @@ -213,4 +214,14 @@ config CORESIGHT_TPDM > To compile this driver as a module, choose M here: the module will be > called coresight-tpdm. > > +config CORESIGHT_TPDA > + tristate "CoreSight Trace, Profiling & Diagnostics Aggregator driver" > + help > + This driver provides support for configuring aggregator. This is > + primarily useful for pulling the data sets from one or more > + attached monitors and pushing the resultant data out. Multiple > + monitors are connected on different input ports of TPDA. > + > + To compile this driver as a module, choose M here: the module will be > + called coresight-tpda. > endif > diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile > index 6bb9b1746bc7..1712d82e7260 100644 > --- a/drivers/hwtracing/coresight/Makefile > +++ b/drivers/hwtracing/coresight/Makefile > @@ -26,5 +26,6 @@ obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o > obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o > obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o > obj-$(CONFIG_CORESIGHT_TPDM) += coresight-tpdm.o > +obj-$(CONFIG_CORESIGHT_TPDA) += coresight-tpda.o > coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \ > coresight-cti-sysfs.o > diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c > new file mode 100644 > index 000000000000..7a0478a8b63e > --- /dev/null > +++ b/drivers/hwtracing/coresight/coresight-tpda.c > @@ -0,0 +1,206 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include <linux/amba/bus.h> > +#include <linux/bitfield.h> > +#include <linux/coresight.h> > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/fs.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > + > +#include "coresight-priv.h" > +#include "coresight-tpda.h" > +#include "coresight-trace-id.h" > + > +DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda"); > + > +/* Settings pre enabling port control register */ > +static void tpda_enable_pre_port(struct tpda_drvdata *drvdata) > +{ > + u32 val; > + > + val = readl_relaxed(drvdata->base + TPDA_CR); Even though the drvdata->atid is constant during the life time of the driver, I would recommend clearing the field and then setting it. e.g, if you get a different ATID on unload-load sequence of the driver, the field will corrupted. val &= ~TPDA_CR_ATID; > + val |= FIELD_PREP(TPDA_CR_ATID, drvdata->atid); > + writel_relaxed(val, drvdata->base + TPDA_CR); > +} > + Is there no global turn-ON for the TPDA ? Or is it per-port enable only via TPDA_Pn_CR ? > +static void tpda_enable_port(struct tpda_drvdata *drvdata, int port) > +{ > + u32 val; > + > + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); > + /* Enable the port */ > + val |= TPDA_Pn_CR_ENA; > + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); > +} > + > +static void __tpda_enable(struct tpda_drvdata *drvdata, int port) > +{ > + CS_UNLOCK(drvdata->base); > + > + if (!drvdata->csdev->enable) > + tpda_enable_pre_port(drvdata); > + > + tpda_enable_port(drvdata, port); > + > + CS_LOCK(drvdata->base); > +} > + > +static int tpda_enable(struct coresight_device *csdev, int inport, int outport) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); > + > + spin_lock(&drvdata->spinlock); > + if (atomic_read(&csdev->refcnt[inport]) == 0) > + __tpda_enable(drvdata, inport); > + > + atomic_inc(&csdev->refcnt[inport]); > + spin_unlock(&drvdata->spinlock); > + > + dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", inport); > + return 0; > +} > + > +static void __tpda_disable(struct tpda_drvdata *drvdata, int port) > +{ > + u32 val; > + > + CS_UNLOCK(drvdata->base); > + > + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); > + val &= ~TPDA_Pn_CR_ENA; > + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); > + > + CS_LOCK(drvdata->base); > +} > + > +static void tpda_disable(struct coresight_device *csdev, int inport, > + int outport) > +{ > + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); > + > + spin_lock(&drvdata->spinlock); > + if (atomic_dec_return(&csdev->refcnt[inport]) == 0) > + __tpda_disable(drvdata, inport); > + > + spin_unlock(&drvdata->spinlock); > + > + dev_dbg(drvdata->dev, "TPDA inport %d disabled\n", inport); > +} > + > +static const struct coresight_ops_link tpda_link_ops = { > + .enable = tpda_enable, > + .disable = tpda_disable, > +}; > + > +static const struct coresight_ops tpda_cs_ops = { > + .link_ops = &tpda_link_ops, > +}; > + > +static int tpda_init_default_data(struct tpda_drvdata *drvdata) > +{ Is there a register that indicates the number of ports on the device ? We don't seem to be using that information. > + int atid; > + /* > + * TPDA must has a unique atid. This atid can uniquely > + * identify the TPDM trace source connected to the TPDA. > + */ > + atid = coresight_trace_id_get_system_id(coresight_get_trace_id_map()); > + if (atid < 0) > + return atid; > + You need to release this id at module exit. Otherwise, we are leaking the id. Suzuki
Hi Suzuki, Thanks for the review. On 7/1/2022 6:24 PM, Suzuki K Poulose wrote: > On 20/06/2022 13:00, Mao Jinlong wrote: >> TPDA(Trace, Profiling and Diagnostics Aggregator) is >> to provide packetization, funneling and timestamping of >> TPDM data. Multiple monitors are connected to different >> input ports of TPDA.This change is to add tpda >> enable/disable/probe functions for coresight tpda driver. >> >> - - - - - - - - - - - - >> | TPDM 0| | TPDM 1 | | TPDM 2| >> - - - - - - - - - - - - >> | | | >> |_ _ _ _ _ _ | _ _ _ _ | >> | | | >> | | | >> ------------------ >> | TPDA | >> ------------------ >> >> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >> Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> >> --- >> drivers/hwtracing/coresight/Kconfig | 11 + >> drivers/hwtracing/coresight/Makefile | 1 + >> drivers/hwtracing/coresight/coresight-tpda.c | 206 +++++++++++++++++++ >> drivers/hwtracing/coresight/coresight-tpda.h | 35 ++++ >> 4 files changed, 253 insertions(+) >> create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c >> create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h >> >> diff --git a/drivers/hwtracing/coresight/Kconfig >> b/drivers/hwtracing/coresight/Kconfig >> index b2b72a35e416..0cbebfd0d23e 100644 >> --- a/drivers/hwtracing/coresight/Kconfig >> +++ b/drivers/hwtracing/coresight/Kconfig >> @@ -205,6 +205,7 @@ config CORESIGHT_TRBE >> config CORESIGHT_TPDM >> tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver" >> select CORESIGHT_LINKS_AND_SINKS >> + select CORESIGHT_TPDA >> help >> This driver provides support for configuring monitor. >> Monitors are >> primarily responsible for data set collection and support the >> @@ -213,4 +214,14 @@ config CORESIGHT_TPDM >> To compile this driver as a module, choose M here: the module >> will be >> called coresight-tpdm. >> +config CORESIGHT_TPDA >> + tristate "CoreSight Trace, Profiling & Diagnostics Aggregator >> driver" >> + help >> + This driver provides support for configuring aggregator. This is >> + primarily useful for pulling the data sets from one or more >> + attached monitors and pushing the resultant data out. Multiple >> + monitors are connected on different input ports of TPDA. >> + >> + To compile this driver as a module, choose M here: the module >> will be >> + called coresight-tpda. >> endif >> diff --git a/drivers/hwtracing/coresight/Makefile >> b/drivers/hwtracing/coresight/Makefile >> index 6bb9b1746bc7..1712d82e7260 100644 >> --- a/drivers/hwtracing/coresight/Makefile >> +++ b/drivers/hwtracing/coresight/Makefile >> @@ -26,5 +26,6 @@ obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o >> obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o >> obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o >> obj-$(CONFIG_CORESIGHT_TPDM) += coresight-tpdm.o >> +obj-$(CONFIG_CORESIGHT_TPDA) += coresight-tpda.o >> coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \ >> coresight-cti-sysfs.o >> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c >> b/drivers/hwtracing/coresight/coresight-tpda.c >> new file mode 100644 >> index 000000000000..7a0478a8b63e >> --- /dev/null >> +++ b/drivers/hwtracing/coresight/coresight-tpda.c >> @@ -0,0 +1,206 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights >> reserved. >> + */ >> + >> +#include <linux/amba/bus.h> >> +#include <linux/bitfield.h> >> +#include <linux/coresight.h> >> +#include <linux/device.h> >> +#include <linux/err.h> >> +#include <linux/fs.h> >> +#include <linux/io.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/platform_device.h> >> + >> +#include "coresight-priv.h" >> +#include "coresight-tpda.h" >> +#include "coresight-trace-id.h" >> + >> +DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda"); >> + >> +/* Settings pre enabling port control register */ >> +static void tpda_enable_pre_port(struct tpda_drvdata *drvdata) >> +{ >> + u32 val; >> + >> + val = readl_relaxed(drvdata->base + TPDA_CR); > > > Even though the drvdata->atid is constant during the life time > of the driver, I would recommend clearing the field and then > setting it. e.g, if you get a different ATID on unload-load > sequence of the driver, the field will corrupted. I will release the id in module exist function. > > val &= ~TPDA_CR_ATID; > >> + val |= FIELD_PREP(TPDA_CR_ATID, drvdata->atid); > > >> + writel_relaxed(val, drvdata->base + TPDA_CR); >> +} >> + > > Is there no global turn-ON for the TPDA ? Or is it per-port > enable only via TPDA_Pn_CR ? No global turn-on for the TPDA. It is per-port enable via TPDA_Pn_CR. > >> +static void tpda_enable_port(struct tpda_drvdata *drvdata, int port) >> +{ >> + u32 val; >> + >> + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); >> + /* Enable the port */ >> + val |= TPDA_Pn_CR_ENA; >> + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); >> +} >> + >> +static void __tpda_enable(struct tpda_drvdata *drvdata, int port) >> +{ >> + CS_UNLOCK(drvdata->base); >> + >> + if (!drvdata->csdev->enable) >> + tpda_enable_pre_port(drvdata); >> + >> + tpda_enable_port(drvdata, port); >> + >> + CS_LOCK(drvdata->base); >> +} >> + >> +static int tpda_enable(struct coresight_device *csdev, int inport, >> int outport) >> +{ >> + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); >> + >> + spin_lock(&drvdata->spinlock); >> + if (atomic_read(&csdev->refcnt[inport]) == 0) >> + __tpda_enable(drvdata, inport); >> + >> + atomic_inc(&csdev->refcnt[inport]); >> + spin_unlock(&drvdata->spinlock); >> + >> + dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", inport); >> + return 0; >> +} >> + >> +static void __tpda_disable(struct tpda_drvdata *drvdata, int port) >> +{ >> + u32 val; >> + >> + CS_UNLOCK(drvdata->base); >> + >> + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); >> + val &= ~TPDA_Pn_CR_ENA; >> + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); >> + >> + CS_LOCK(drvdata->base); >> +} >> + >> +static void tpda_disable(struct coresight_device *csdev, int inport, >> + int outport) >> +{ >> + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); >> + >> + spin_lock(&drvdata->spinlock); >> + if (atomic_dec_return(&csdev->refcnt[inport]) == 0) >> + __tpda_disable(drvdata, inport); >> + >> + spin_unlock(&drvdata->spinlock); >> + >> + dev_dbg(drvdata->dev, "TPDA inport %d disabled\n", inport); >> +} >> + >> +static const struct coresight_ops_link tpda_link_ops = { >> + .enable = tpda_enable, >> + .disable = tpda_disable, >> +}; >> + >> +static const struct coresight_ops tpda_cs_ops = { >> + .link_ops = &tpda_link_ops, >> +}; >> + >> +static int tpda_init_default_data(struct tpda_drvdata *drvdata) >> +{ > > Is there a register that indicates the number of ports on the device ? > We don't seem to be using that information. No such register. > >> + int atid; >> + /* >> + * TPDA must has a unique atid. This atid can uniquely >> + * identify the TPDM trace source connected to the TPDA. >> + */ >> + atid = >> coresight_trace_id_get_system_id(coresight_get_trace_id_map()); >> + if (atid < 0) >> + return atid; >> + > > You need to release this id at module exit. Otherwise, we are leaking > the id. > I will address the comments. > > Suzuki
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig index b2b72a35e416..0cbebfd0d23e 100644 --- a/drivers/hwtracing/coresight/Kconfig +++ b/drivers/hwtracing/coresight/Kconfig @@ -205,6 +205,7 @@ config CORESIGHT_TRBE config CORESIGHT_TPDM tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver" select CORESIGHT_LINKS_AND_SINKS + select CORESIGHT_TPDA help This driver provides support for configuring monitor. Monitors are primarily responsible for data set collection and support the @@ -213,4 +214,14 @@ config CORESIGHT_TPDM To compile this driver as a module, choose M here: the module will be called coresight-tpdm. +config CORESIGHT_TPDA + tristate "CoreSight Trace, Profiling & Diagnostics Aggregator driver" + help + This driver provides support for configuring aggregator. This is + primarily useful for pulling the data sets from one or more + attached monitors and pushing the resultant data out. Multiple + monitors are connected on different input ports of TPDA. + + To compile this driver as a module, choose M here: the module will be + called coresight-tpda. endif diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index 6bb9b1746bc7..1712d82e7260 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -26,5 +26,6 @@ obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o obj-$(CONFIG_CORESIGHT_TPDM) += coresight-tpdm.o +obj-$(CONFIG_CORESIGHT_TPDA) += coresight-tpda.o coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \ coresight-cti-sysfs.o diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c new file mode 100644 index 000000000000..7a0478a8b63e --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/amba/bus.h> +#include <linux/bitfield.h> +#include <linux/coresight.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include "coresight-priv.h" +#include "coresight-tpda.h" +#include "coresight-trace-id.h" + +DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda"); + +/* Settings pre enabling port control register */ +static void tpda_enable_pre_port(struct tpda_drvdata *drvdata) +{ + u32 val; + + val = readl_relaxed(drvdata->base + TPDA_CR); + val |= FIELD_PREP(TPDA_CR_ATID, drvdata->atid); + writel_relaxed(val, drvdata->base + TPDA_CR); +} + +static void tpda_enable_port(struct tpda_drvdata *drvdata, int port) +{ + u32 val; + + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); + /* Enable the port */ + val |= TPDA_Pn_CR_ENA; + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); +} + +static void __tpda_enable(struct tpda_drvdata *drvdata, int port) +{ + CS_UNLOCK(drvdata->base); + + if (!drvdata->csdev->enable) + tpda_enable_pre_port(drvdata); + + tpda_enable_port(drvdata, port); + + CS_LOCK(drvdata->base); +} + +static int tpda_enable(struct coresight_device *csdev, int inport, int outport) +{ + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); + + spin_lock(&drvdata->spinlock); + if (atomic_read(&csdev->refcnt[inport]) == 0) + __tpda_enable(drvdata, inport); + + atomic_inc(&csdev->refcnt[inport]); + spin_unlock(&drvdata->spinlock); + + dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", inport); + return 0; +} + +static void __tpda_disable(struct tpda_drvdata *drvdata, int port) +{ + u32 val; + + CS_UNLOCK(drvdata->base); + + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); + val &= ~TPDA_Pn_CR_ENA; + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); + + CS_LOCK(drvdata->base); +} + +static void tpda_disable(struct coresight_device *csdev, int inport, + int outport) +{ + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); + + spin_lock(&drvdata->spinlock); + if (atomic_dec_return(&csdev->refcnt[inport]) == 0) + __tpda_disable(drvdata, inport); + + spin_unlock(&drvdata->spinlock); + + dev_dbg(drvdata->dev, "TPDA inport %d disabled\n", inport); +} + +static const struct coresight_ops_link tpda_link_ops = { + .enable = tpda_enable, + .disable = tpda_disable, +}; + +static const struct coresight_ops tpda_cs_ops = { + .link_ops = &tpda_link_ops, +}; + +static int tpda_init_default_data(struct tpda_drvdata *drvdata) +{ + int atid; + /* + * TPDA must has a unique atid. This atid can uniquely + * identify the TPDM trace source connected to the TPDA. + */ + atid = coresight_trace_id_get_system_id(coresight_get_trace_id_map()); + if (atid < 0) + return atid; + + drvdata->atid = atid; + return 0; +} + +static int tpda_probe(struct amba_device *adev, const struct amba_id *id) +{ + int ret; + struct device *dev = &adev->dev; + struct coresight_platform_data *pdata; + struct tpda_drvdata *drvdata; + struct coresight_desc desc = { 0 }; + void __iomem *base; + + pdata = coresight_get_platform_data(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + adev->dev.platform_data = pdata; + + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + drvdata->dev = &adev->dev; + dev_set_drvdata(dev, drvdata); + + base = devm_ioremap_resource(dev, &adev->res); + if (!base) + return -ENOMEM; + drvdata->base = base; + + spin_lock_init(&drvdata->spinlock); + + ret = tpda_init_default_data(drvdata); + if (ret) + return ret; + + desc.name = coresight_alloc_device_name(&tpda_devs, dev); + if (!desc.name) + return -ENOMEM; + desc.type = CORESIGHT_DEV_TYPE_LINK; + desc.subtype.link_subtype = CORESIGHT_DEV_SUBTYPE_LINK_MERG; + desc.ops = &tpda_cs_ops; + desc.pdata = adev->dev.platform_data; + desc.dev = &adev->dev; + desc.access = CSDEV_ACCESS_IOMEM(base); + drvdata->csdev = coresight_register(&desc); + if (IS_ERR(drvdata->csdev)) + return PTR_ERR(drvdata->csdev); + + pm_runtime_put(&adev->dev); + + dev_dbg(drvdata->dev, "TPDA initialized\n"); + return 0; +} + +static void __exit tpda_remove(struct amba_device *adev) +{ + struct tpda_drvdata *drvdata = dev_get_drvdata(&adev->dev); + + coresight_unregister(drvdata->csdev); +} + +/* + * Different TPDA has different periph id. + * The difference is 0-7 bits' value. So ignore 0-7 bits. + */ +static struct amba_id tpda_ids[] = { + { + .id = 0x000f0f00, + .mask = 0x000fff00, + }, + { 0, 0}, +}; + +static struct amba_driver tpda_driver = { + .drv = { + .name = "coresight-tpda", + .owner = THIS_MODULE, + .suppress_bind_attrs = true, + }, + .probe = tpda_probe, + .remove = tpda_remove, + .id_table = tpda_ids, +}; + +module_amba_driver(tpda_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Trace, Profiling & Diagnostic Aggregator driver"); diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h new file mode 100644 index 000000000000..4beb33263c96 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-tpda.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _CORESIGHT_CORESIGHT_TPDA_H +#define _CORESIGHT_CORESIGHT_TPDA_H + +#define TPDA_CR (0x000) +#define TPDA_Pn_CR(n) (0x004 + (n * 4)) +/* Aggregator port enable bit */ +#define TPDA_Pn_CR_ENA BIT(0) + +#define TPDA_MAX_INPORTS 32 + +/* Bits 6 ~ 12 is for atid value */ +#define TPDA_CR_ATID GENMASK(12, 6) + +/** + * struct tpda_drvdata - specifics associated to an TPDA component + * @base: memory mapped base address for this component. + * @dev: The device entity associated to this component. + * @csdev: component vitals needed by the framework. + * @spinlock: lock for the drvdata value. + * @enable: enable status of the component. + */ +struct tpda_drvdata { + void __iomem *base; + struct device *dev; + struct coresight_device *csdev; + spinlock_t spinlock; + u8 atid; +}; + +#endif /* _CORESIGHT_CORESIGHT_TPDA_H */