diff mbox series

[v6,05/12] regulator: qcom_spmi: add support for HT_P600

Message ID 20220704212402.1715182-5-robimarko@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v6,01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074 | expand

Commit Message

Robert Marko July 4, 2022, 9:23 p.m. UTC 
HT_P600 is a LDO PMOS regulator based on LV P600 using HFS430 layout
found in PMP8074 and PMS405 PMIC-s.

Both PMP8074 and PMS405 define the programmable range as 1.704 to 1.896V
but the actual MAX output voltage depends on the exact LDO in each of
the PMIC-s.
Their usual voltage that they are used is 1.8V.

It has a max current of 600mA, voltage step of 8mV.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 drivers/regulator/qcom_spmi-regulator.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 38bbc70241ae..ad9ad9f4be8e 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -165,6 +165,7 @@  enum spmi_regulator_subtype {
 	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4	= 0x10,
 	SPMI_REGULATOR_SUBTYPE_HFS430		= 0x0a,
 	SPMI_REGULATOR_SUBTYPE_HT_P150		= 0x35,
+	SPMI_REGULATOR_SUBTYPE_HT_P600		= 0x3d,
 };
 
 enum spmi_common_regulator_registers {
@@ -549,6 +550,10 @@  static struct spmi_voltage_range ht_p150_ranges[] = {
 	SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000),
 };
 
+static struct spmi_voltage_range ht_p600_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000),
+};
+
 static DEFINE_SPMI_SET_POINTS(pldo);
 static DEFINE_SPMI_SET_POINTS(nldo1);
 static DEFINE_SPMI_SET_POINTS(nldo2);
@@ -570,6 +575,7 @@  static DEFINE_SPMI_SET_POINTS(ht_lvpldo);
 static DEFINE_SPMI_SET_POINTS(ht_nldo);
 static DEFINE_SPMI_SET_POINTS(hfs430);
 static DEFINE_SPMI_SET_POINTS(ht_p150);
+static DEFINE_SPMI_SET_POINTS(ht_p600);
 
 static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
 				 int len)
@@ -1464,6 +1470,7 @@  static const struct regulator_ops spmi_hfs430_ops = {
 
 static const struct spmi_regulator_mapping supported_regulators[] = {
 	/*           type subtype dig_min dig_max ltype ops setpoints hpm_min */
+	SPMI_VREG(LDO,   HT_P600,  0, INF, HFS430, hfs430, ht_p600, 10000),
 	SPMI_VREG(LDO,   HT_P150,  0, INF, HFS430, hfs430, ht_p150, 10000),
 	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
 	SPMI_VREG(BUCK,  HFS430,   0, INF, HFS430, hfs430, hfs430,  10000),