| Message ID | 20220724122424.2509021-6-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for tsens controller reinit via trustzone | expand |
On 24.07.2022 14:24, Bhupesh Sharma wrote: > tsens controller(s) on Qualcomm sm6375 SoC might start in > an unknown state or start with TSENS_EN indicating > a 'disabled' state when they enter linux world. > > In such cases, it is useful to try and reinit them via > trustzone [via scm call(s)], at the very start. > > Add hooks for the same in the qcom tsens driver. > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Amit Kucheria <amitk@kernel.org> > Cc: Thara Gopinath <thara.gopinath@gmail.com> > Cc: linux-pm@vger.kernel.org > Cc: linux-arm-msm@vger.kernel.org > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- This sadly doesn't work.. the issue on 6375 is that the controller is in some weird state at boot and this bit that's higher up: ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); if (ret) goto err_put_device; if (!enabled) { dev_err(dev, "%s: device not enabled\n", __func__); ret = -ENODEV; goto err_put_device; } does not succeed. Moving the code added in the patch up or calling qcom_scm_tsens_reinit() or qcom_scm_tsens_reinit() and tsens_reenable_hw_after_scm(priv) directly before this enable check also fails. In fact, the latter crashes the platform.. I don't want to block this series, so I suggest the 6375 part can be dropped for now. Konrad
Hi Konrad, On Thu, 28 Jul 2022 at 19:42, Konrad Dybcio <konrad.dybcio@somainline.org> wrote: > > > > On 24.07.2022 14:24, Bhupesh Sharma wrote: > > tsens controller(s) on Qualcomm sm6375 SoC might start in > > an unknown state or start with TSENS_EN indicating > > a 'disabled' state when they enter linux world. > > > > In such cases, it is useful to try and reinit them via > > trustzone [via scm call(s)], at the very start. > > > > Add hooks for the same in the qcom tsens driver. > > > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Amit Kucheria <amitk@kernel.org> > > Cc: Thara Gopinath <thara.gopinath@gmail.com> > > Cc: linux-pm@vger.kernel.org > > Cc: linux-arm-msm@vger.kernel.org > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > This sadly doesn't work.. the issue on 6375 is that the controller > is in some weird state at boot and this bit that's higher up: > > ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); > if (ret) > goto err_put_device; > if (!enabled) { > dev_err(dev, "%s: device not enabled\n", __func__); > ret = -ENODEV; > goto err_put_device; > } > > does not succeed. > > Moving the code added in the patch up or calling > qcom_scm_tsens_reinit() or qcom_scm_tsens_reinit() and > tsens_reenable_hw_after_scm(priv) directly before this enable > check also fails. In fact, the latter crashes the platform.. > > I don't want to block this series, so I suggest the 6375 part can > be dropped for now. Many thanks for testing the patchset. I agree.. let me drop this patch from the v3 version and we can later target this sm6375 issue via a separate patch. Regards, Bhupesh
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 928b6a44fda8..0141ea43c290 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -1083,6 +1083,16 @@ int __init init_common(struct tsens_priv *priv) if (tsens_version(priv) >= VER_0_1) tsens_enable_irq(priv); + /* + * For some tsens controllers, which start in + * an unknown state or start with TSENS_EN indicating + * a 'disabled' state, its useful to try and reinit + * them via trustzone, at the very start. + */ + if (priv->needs_reinit_wa && + (of_device_is_compatible(dev->of_node, "qcom,sm6375-tsens"))) + __tsens_reinit_worker(priv); + tsens_debug_init(op); err_put_device: @@ -1145,6 +1155,9 @@ static const struct of_device_id tsens_table[] = { }, { .compatible = "qcom,msm8996-tsens", .data = &data_8996, + }, { + .compatible = "qcom,sm6375-tsens", + .data = &data_tsens_v2_reinit, }, { .compatible = "qcom,sm8150-tsens", .data = &data_tsens_v2_reinit,
tsens controller(s) on Qualcomm sm6375 SoC might start in an unknown state or start with TSENS_EN indicating a 'disabled' state when they enter linux world. In such cases, it is useful to try and reinit them via trustzone [via scm call(s)], at the very start. Add hooks for the same in the qcom tsens driver. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Amit Kucheria <amitk@kernel.org> Cc: Thara Gopinath <thara.gopinath@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- drivers/thermal/qcom/tsens.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)