diff mbox series

[v2,1/2] dt-bindings: pinctrl: qcom: Add sm8450 lpass lpi pinctrl bindings

Message ID 20220816180157.6711-2-srinivas.kandagatla@linaro.org (mailing list archive)
State Superseded
Headers show
Series pinctrl: add support for SM8450 LPASS LPI pinctrl | expand

Commit Message

Srinivas Kandagatla Aug. 16, 2022, 6:01 p.m. UTC 
Add device tree binding Documentation details for Qualcomm SM8450
LPASS(Low Power Audio Sub System) LPI(Low Power Island) pinctrl driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../qcom,sm8450-lpass-lpi-pinctrl.yaml        | 136 ++++++++++++++++++
 1 file changed, 136 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml

Comments

Krzysztof Kozlowski Aug. 17, 2022, 6:07 a.m. UTC | #1 
On 16/08/2022 21:01, Srinivas Kandagatla wrote:
> Add device tree binding Documentation details for Qualcomm SM8450
> LPASS(Low Power Audio Sub System) LPI(Low Power Island) pinctrl driver.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  .../qcom,sm8450-lpass-lpi-pinctrl.yaml        | 136 ++++++++++++++++++
>  1 file changed, 136 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
> 

Thank you for your patch. There is something to discuss/improve.

> +  gpio-ranges:
> +    maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> +  '-pins$':
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "/schemas/pinctrl/pincfg-node.yaml"

Drop quotes.

> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          pattern: "^gpio([0-1]|[0-8]])$"

Similarly to your other patch SC8280XP - this looks not correct.
> +
> +      function:
> +        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
> +                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
> +                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
> +                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
> +                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
> +                wsa2_swr_data, i2s2_data, i2s4_ws, i2s4_clk, i2s4_data,
> +                slimbus_clk, i2s3_clk, i2s3_ws, i2s3_data, slimbus_data,
> +                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a, ext_mclk1_d,
> +                ext_mclk1_e ]
> +
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +      drive-strength:
> +        enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +        default: 2
> +        description:
> +          Selects the drive strength for the specified pins, in mA.
> +
> +      slew-rate:
> +        enum: [0, 1, 2, 3]
> +        default: 0
> +        description: |
> +          0: No adjustments
> +          1: Higher Slew rate (faster edges)
> +          2: Lower Slew rate (slower edges)
> +          3: Reserved (No adjustments)
> +
> +      bias-pull-down: true
> +
> +      bias-pull-up: true
> +
> +      bias-disable: true
> +
> +      output-high: true
> +
> +      output-low: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +allOf:
> +  - $ref: "pinctrl.yaml#"

Drop the quotes.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/sound/qcom,q6afe.h>
> +    lpi_tlmm: pinctrl@33c0000 {

Drop label.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..3d75c87c259d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,136 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sm8450-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI pins SLEW registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-1]|[0-8]])$"
+
+      function:
+        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+                wsa2_swr_data, i2s2_data, i2s4_ws, i2s4_clk, i2s4_data,
+                slimbus_clk, i2s3_clk, i2s3_ws, i2s3_data, slimbus_data,
+                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a, ext_mclk1_d,
+                ext_mclk1_e ]
+
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    lpi_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+        reg = <0x3440000 0x20000>,
+              <0x34d0000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 23>;
+    };