diff mbox series

[14/14] arm64: dts: qcom: sm4250: Add support for oneplus-billie2

Message ID 20220901072414.1923075-15-iskren.chernev@gmail.com (mailing list archive)
State Superseded
Headers show
Series Add support for sm6115,4250 and OnePlus Nord N100 | expand

Commit Message

Iskren Chernev Sept. 1, 2022, 7:24 a.m. UTC 
Add initial support for OnePlus Nord N100, based on SM4250. Currently
working:
- boots
- usb
- buildin flash storage (UFS)
- SD card reader

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 240 ++++++++++++++++++
 1 file changed, 240 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts

Comments

Krzysztof Kozlowski Sept. 1, 2022, 4:20 p.m. UTC | #1 
On 01/09/2022 10:24, Iskren Chernev wrote:
> Add initial support for OnePlus Nord N100, based on SM4250. Currently
> working:
> - boots
> - usb
> - buildin flash storage (UFS)
> - SD card reader
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---
>  .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 240 ++++++++++++++++++
>  1 file changed, 240 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> new file mode 100644
> index 000000000000..c1cf0288aa5f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -0,0 +1,240 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm4250.dtsi"
> +
> +/ {
> +	model = "OnePlus Nord N100";
> +	compatible = "oneplus,billie2", "qcom,sm4250";
> +
> +	/* required for bootloader to select correct board */
> +	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
> +	qcom,board-id = <0x1000b 0x00>;
> +
> +	aliases {
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon=tty0 console=tty0 clk_ignore_unused pd_ignore_unused";

No bootargs. They are not suitable for wide-use.

> +
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		stdout-path = "framebuffer0";
> +
> +		framebuffer0: framebuffer@9d400000 {
> +			compatible = "simple-framebuffer";
> +			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
> +			width = <720>;
> +			height = <1600>;
> +			stride = <(720 * 4)>;
> +			format = "a8r8g8b8";
> +			status= "okay";

No need for status in new nodes.

> +		};
> +	};
> +
> +	reserved-memory {
> +		mtp_mem: memory@cc300000 {
> +			reg = <0x00 0xcc300000 0x00 0xb00000>;
> +			no-map;
> +		};
> +
> +		param_mem: memory@cc200000 {
> +			reg = <0x00 0xcc200000 0x00 0x100000>;
> +			no-map;
> +		};
> +
> +		bootloader_log_mem: memory@5fff7000 {
> +			reg = <0x00 0x5fff7000 0x00 0x8000>;
> +			no-map;
> +		};
> +
> +		ramoops@cbe00000 {
> +			compatible = "ramoops";
> +			reg = <0x0 0xcbe00000 0x0 0x400000>;
> +			record-size = <0x40000>;
> +			pmsg-size = <0x200000>;
> +			console-size = <0x40000>;
> +			ftrace-size = <0x40000>;
> +		};
> +	};
> +};
> +
> +&usb3 {
> +	status = "okay";
> +};
> +
> +&hsusb_phy {
> +	status = "okay";

Status is the last property. Also in other places.

> +	vdd-supply = <&vreg_l4a>;
> +	vdda-pll-supply = <&vreg_l12a>;
> +	vdda-phy-dpdm-supply = <&vreg_l15a>;
> +
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <14 4>;
> +};
> +
> +&sdhc_2 {
> +	status = "okay";
> +	vmmc-supply = <&vreg_l22a>;
> +	vqmmc-supply = <&vreg_l5a>;
> +
> +	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
> +
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc2_state_on>;
> +	pinctrl-1 = <&sdc2_state_off>;
> +};
> +
> +&ufs_mem_hc {
> +	status = "okay";
> +	vcc-supply = <&vreg_l24a>;
> +	vcc-max-microamp = <600000>;
> +	vccq2-supply = <&vreg_l11a>;
> +	vccq2-max-microamp = <600000>;
> +};
> +
> +&ufs_mem_phy {
> +	status = "okay";
> +	vdda-phy-supply = <&vreg_l4a>;
> +	vdda-pll-supply = <&vreg_l12a>;
> +	vddp-ref-clk-supply = <&vreg_l18a>;
> +};
> +
> +&rpm_requests {
> +	pm6125-regulators {

regulators

> +		compatible = "qcom,rpm-pm6125-regulators";
> +


Best regards,
Krzysztof
Konrad Dybcio Sept. 3, 2022, 12:32 p.m. UTC | #2 
On 1.09.2022 18:20, Krzysztof Kozlowski wrote:
> On 01/09/2022 10:24, Iskren Chernev wrote:
>> Add initial support for OnePlus Nord N100, based on SM4250. Currently
>> working:
>> - boots
>> - usb
>> - buildin flash storage (UFS)
>> - SD card reader
>>
>> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
>> ---
>>  .../boot/dts/qcom/sm4250-oneplus-billie2.dts  | 240 ++++++++++++++++++
>>  1 file changed, 240 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
>> new file mode 100644
>> index 000000000000..c1cf0288aa5f
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
>> @@ -0,0 +1,240 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "sm4250.dtsi"
>> +
>> +/ {
>> +	model = "OnePlus Nord N100";
>> +	compatible = "oneplus,billie2", "qcom,sm4250";
>> +
>> +	/* required for bootloader to select correct board */
>> +	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
>> +	qcom,board-id = <0x1000b 0x00>;
>> +
>> +	aliases {
>> +	};
>> +
>> +	chosen {
>> +		bootargs = "earlycon=tty0 console=tty0 clk_ignore_unused pd_ignore_unused";
> 
> No bootargs. They are not suitable for wide-use.
Agreed, the problem here is probably the framebuffer dying after our clock controllers probe.
One can solve that by adding the relevant clocks/PDs under the framebuffer node like I did
in sm8[123]50 Xperia DTs.

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 000000000000..c1cf0288aa5f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,240 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "OnePlus Nord N100";
+	compatible = "oneplus,billie2", "qcom,sm4250";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	aliases {
+	};
+
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0 clk_ignore_unused pd_ignore_unused";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+			width = <720>;
+			height = <1600>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+			status= "okay";
+		};
+	};
+
+	reserved-memory {
+		mtp_mem: memory@cc300000 {
+			reg = <0x00 0xcc300000 0x00 0xb00000>;
+			no-map;
+		};
+
+		param_mem: memory@cc200000 {
+			reg = <0x00 0xcc200000 0x00 0x100000>;
+			no-map;
+		};
+
+		bootloader_log_mem: memory@5fff7000 {
+			reg = <0x00 0x5fff7000 0x00 0x8000>;
+			no-map;
+		};
+
+		ramoops@cbe00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xcbe00000 0x0 0x400000>;
+			record-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+		};
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&hsusb_phy {
+	status = "okay";
+	vdd-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on>;
+	pinctrl-1 = <&sdc2_state_off>;
+};
+
+&ufs_mem_hc {
+	status = "okay";
+	vcc-supply = <&vreg_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l11a>;
+	vccq2-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+};
+
+&rpm_requests {
+	pm6125-regulators {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};