diff mbox series

[v6,3/4,RESEND] arm64: dts: qcom: sm8150: Add dt entries to support crypto engine.

Message ID 20220919221509.1057574-4-bhupesh.sharma@linaro.org (mailing list archive)
State Superseded
Headers show
Series ARM: dts + defconfig: Add support for Qualcomm QCE block on new SoCs and in defconfig | expand

Commit Message

Bhupesh Sharma Sept. 19, 2022, 10:15 p.m. UTC 
Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm8150.dtsi'.

Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Tested-by: Jordan Crouse <jorcrous@amazon.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index cef8c4f4f0ff..6e21352a158c 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2041,6 +2041,34 @@  ufs_mem_phy_lanes: phy@1d87400 {
 			};
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x504 0x0011>,
+				 <&apps_smmu 0x506 0x0011>,
+				 <&apps_smmu 0x514 0x0011>,
+				 <&apps_smmu 0x516 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>;
+			interconnect-names = "memory";
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8150-qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x504 0x0011>,
+				 <&apps_smmu 0x506 0x0011>,
+				 <&apps_smmu 0x514 0x0011>,
+				 <&apps_smmu 0x516 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>;
+			interconnect-names = "memory";
+		};
+
 		ipa_virt: interconnect@1e00000 {
 			compatible = "qcom,sm8150-ipa-virt";
 			reg = <0 0x01e00000 0 0x1000>;