diff mbox series

[v3,3/3] clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs

Message ID 20220920111517.10407-3-quic_rjendra@quicinc.com (mailing list archive)
State Accepted
Headers show
Series [v3,1/3] clk: qcom: gdsc: Fix the handling of PWRSTS_RET support | expand

Commit Message

Rajendra Nayak Sept. 20, 2022, 11:15 a.m. UTC 
The USB controllers on sc7280 do not retain the state when
the system goes into low power state and the GDSCs are
turned off. This results in the controllers reinitializing and
re-enumerating all the connected devices (resulting in additional
delay while coming out of suspend)
Fix this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
Since sc7280 only supports cx (parent of usb gdscs) Retention, there
are no cxcs offsets mentioned in order to support the Retention
state.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
v3:
Updated the changelog

 drivers/clk/qcom/gcc-sc7280.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index 7ff64d4d5920..7b6e5a86c11f 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -3126,7 +3126,7 @@  static struct gdsc gcc_usb30_prim_gdsc = {
 	.pd = {
 		.name = "gcc_usb30_prim_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = VOTABLE,
 };
 
@@ -3135,7 +3135,7 @@  static struct gdsc gcc_usb30_sec_gdsc = {
 	.pd = {
 		.name = "gcc_usb30_sec_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = VOTABLE,
 };