| Message ID | 20220927173702.5200-10-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings | expand |
On Tue, 27 Sep 2022 19:36:37 +0200, Krzysztof Kozlowski wrote: > The pin controller driver has BLSP functions from 0 to 5, not 1 to 6. > Add missing blsp0_i2c, blsp0_spi (already used in ipq6018-cp01-c1) and > blsp0_uart. Drop blsp6_i2c and blsp6_spi. > > This fixes dtbs_check warning: > > ipq6018-cp01-c1.dtb: pinctrl@1000000: spi-0-state: 'oneOf' conditional failed, one must be fixed: > 'bias-pull-down', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' > 'blsp0_spi' is not one of ['adsp_ext', 'alsp_int', ..... > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Changes since v2: > 1. New patch > --- > .../devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 0bd1aded132d..76698cd97e8c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -72,12 +72,12 @@ patternProperties: enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, - atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, - blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp0_i2c, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp0_spi, blsp1_spi, blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, - blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + blsp0_uart, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
The pin controller driver has BLSP functions from 0 to 5, not 1 to 6. Add missing blsp0_i2c, blsp0_spi (already used in ipq6018-cp01-c1) and blsp0_uart. Drop blsp6_i2c and blsp6_spi. This fixes dtbs_check warning: ipq6018-cp01-c1.dtb: pinctrl@1000000: spi-0-state: 'oneOf' conditional failed, one must be fixed: 'bias-pull-down', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'blsp0_spi' is not one of ['adsp_ext', 'alsp_int', ..... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes since v2: 1. New patch --- .../devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)