diff mbox series

[v1,6/7] arm: dts: qcom: mdm9615: remove invalid interrupt-names from pl18x mmc nodes

Message ID 20220928-mdm9615-dt-schema-fixes-v1-6-b6e63a7df1e8@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm: qcom: mdm9615: first round of bindings and DT fixes | expand

Commit Message

Neil Armstrong Sept. 28, 2022, 9:14 a.m. UTC 
This solves the 'interrupt-names' was unexpected dtbs check error.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 935f7b222200..d8723bd3fedb 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -325,7 +325,6 @@  sdcc1: mmc@12180000 {
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12180000 0x2000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -345,7 +344,6 @@  sdcc2: mmc@12140000 {
 				status = "disabled";
 				reg = <0x12140000 0x2000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;