diff mbox series

[1/2] dt-bindings: pinctrl: qcom: Add QDU1000 and QRU1000 pinctrl bindings

Message ID 20221001030546.28220-2-quic_molvera@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add pinctrl support for QDU1000/QRU1000 SoCs | expand

Commit Message

Melody Olvera Oct. 1, 2022, 3:05 a.m. UTC 
Add documentation details for device tree bindings for QDU1000 and QRU1000
TLMM devices.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 .../pinctrl/qcom,qdru1000-pinctrl.yaml        | 133 ++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml

Comments

Krzysztof Kozlowski Oct. 1, 2022, 9:20 a.m. UTC | #1 
On 01/10/2022 05:05, Melody Olvera wrote:
> Add documentation details for device tree bindings for QDU1000 and QRU1000
> TLMM devices.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  .../pinctrl/qcom,qdru1000-pinctrl.yaml        | 133 ++++++++++++++++++
>  1 file changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
> new file mode 100644
> index 000000000000..e8d938303231
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
> +
> +maintainers:
> +  - Melody Olvera <quic_molvera@quicinc.com>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer block.
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,qdu1000-tlmm
> +      - const: qcom,qru1000-tlmm
> +
> +  reg:
> +    items:
> +      - description: Base address of TLMM register space
> +      - description: Size of TLMM register space
> +
> +  interrupts:
> +    minItems: 0

Cannot be 0 of interrupts.

> +    maxItems: 1
> +    items:
> +      - const: TLMM summary IRQ
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  wakeup-parent:
> +    maxItems: 1
> +    description:
> +      Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
> +      a general description of GPIO and interrupt bindings.
> +
> +      Please refer to pinctrl-bindings.txt in this directory for details of the
> +      common pinctrl bindings used by client devices, including the meaning of the
> +      phrase "pin configuration node".
> +
> +      The pin configuration nodes act as a container for an arbitrary number of
> +      subnodes. Each of these subnodes represents some desired configuration for a
> +      pin, a group, or a list of pins or groups. This configuration can include the
> +      mux function to select on those pin(s)/group(s), and various pin configuration
> +      parameters, such as pull-up, drive strength, etc.
> +
> +
> +# PIN CONFIGURATION NODES
> +patternPropetries:
> +  '^.*$':
> +    if:
> +      type: object
> +    then:

Nope, that's not correct binding. It does not work. It never worked.

Please do it exactly like:
https://lore.kernel.org/linux-devicetree/20220930200529.331223-1-krzysztof.kozlowski@linaro.org/T/#m08b62ef5d873a52a5cbf3c53b25eff03726e7a16
https://lore.kernel.org/linux-devicetree/20220927173702.5200-1-krzysztof.kozlowski@linaro.org/T/#t


> +      properties:
> +        pins:
> +          description:
> +            List of gpio pins affected by the properties specified in
> +            this subnode.
> +          items:
> +            oneOf:
> +              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
> +              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
> +            minItems: 1
> +            maxItems: 36
> +        function:
> +          description:
> +            Specify the alternative function to be configured for the
> +            specified pins. Functions are only valid for gpio pins.
> +          enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
> +            atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk,
> +            cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
> +            cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0,
> +            cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1,
> +            gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
> +            mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1,
> +            mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
> +            mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9,
> +            nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1,
> +            phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
> +            phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
> +            phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
> +            phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
> +            phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
> +            pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
> +            qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
> +            qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
> +            qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
> +            qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
> +            qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15,
> +            qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8,
> +            qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd,
> +            sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
> +            tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
> +            uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0,
> +            vfr_1, vsense_trigger]
> +        drive-strength:
> +          enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +          default: 2
> +          description:
> +            Selects the drive strength for the specified pins, in mA.
> +        bias-pull-down: true
> +        bias-pull-up: true
> +        bias-disable: true
> +        output-high: true
> +        output-low: true

You miss blank lines in several places. Please do it exactly like I
shown for sdm845.

> +      required:
> +        - pins
> +        - function
> +      additionalProperties: false
> +
> +examples:
> +  - |
> +    tlmm: pinctrl@03000000 {
> +      compatible = "qcom,qdu10000-tlmm";
> +      reg = <0x03000000 0xdc2000>;
> +      interrupts = <0 208 0>;

Use defines.

> +      gpio-controller;
> +      #gpio-cells = <2>;
> +      interrupt-controller;
> +      #interrupt-cells = <2>;
> +      wakeup-parent = <&pdc>;

Missing children.

> +    };

Best regards,
Krzysztof
Rob Herring Oct. 3, 2022, 1:24 p.m. UTC | #2 
On Fri, 30 Sep 2022 20:05:45 -0700, Melody Olvera wrote:
> Add documentation details for device tree bindings for QDU1000 and QRU1000
> TLMM devices.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  .../pinctrl/qcom,qdru1000-pinctrl.yaml        | 133 ++++++++++++++++++
>  1 file changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:81:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:82:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:83:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:84:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:85:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:86:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:87:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:88:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:89:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:90:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:91:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:92:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:93:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:94:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:95:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:96:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:97:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:98:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:99:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:100:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:101:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:102:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:103:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:104:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:105:13: [warning] wrong indentation: expected 17 but found 12 (indentation)
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml:106:13: [warning] wrong indentation: expected 17 but found 12 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: properties:interrupts:minItems: 0 is less than the minimum of 1
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: properties:interrupts: {'minItems': 0, 'maxItems': 1, 'items': [{'const': 'TLMM summary IRQ'}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: properties:interrupts: 'oneOf' conditional failed, one must be fixed:
	[{'const': 'TLMM summary IRQ'}] is too short
	False schema does not allow 0
	1 was expected
	hint: "minItems" is only needed if less than the "items" list length
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: 'patternPropetries' is not one of ['$id', '$schema', 'title', 'description', 'examples', 'required', 'allOf', 'anyOf', 'oneOf', 'definitions', '$defs', 'additionalProperties', 'dependencies', 'dependentRequired', 'dependentSchemas', 'patternProperties', 'properties', 'if', 'then', 'else', 'unevaluatedProperties', 'deprecated', 'maintainers', 'select', '$ref']
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: 'oneOf' conditional failed, one must be fixed:
	'unevaluatedProperties' is a required property
	'additionalProperties' is a required property
	hint: Either unevaluatedProperties or additionalProperties must be present
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#
./Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: error checking schema file
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml: ignoring, error in schema: properties: interrupts: minItems
Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.example.dts:21.32-30.11: Warning (unit_address_format): /example-0/pinctrl@03000000: unit name should not have leading 0s
Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.example.dtb:0:0: /example-0/pinctrl@03000000: failed to match any schema with compatible: ['qcom,qdu10000-tlmm']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Melody Olvera Oct. 4, 2022, 4:41 p.m. UTC | #3 
On 10/1/2022 4:20 AM, Krzysztof Kozlowski wrote:
> On 01/10/2022 05:05, Melody Olvera wrote:
>> Add documentation details for device tree bindings for QDU1000 and QRU1000
>> TLMM devices.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>> ---
>>  .../pinctrl/qcom,qdru1000-pinctrl.yaml        | 133 ++++++++++++++++++
>>  1 file changed, 133 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..e8d938303231
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
>> @@ -0,0 +1,133 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
>> +
>> +maintainers:
>> +  - Melody Olvera <quic_molvera@quicinc.com>
>> +
>> +description: |
>> +  This binding describes the Top Level Mode Multiplexer block.
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - const: qcom,qdu1000-tlmm
>> +      - const: qcom,qru1000-tlmm
>> +
>> +  reg:
>> +    items:
>> +      - description: Base address of TLMM register space
>> +      - description: Size of TLMM register space
>> +
>> +  interrupts:
>> +    minItems: 0
> Cannot be 0 of interrupts.
>
>> +    maxItems: 1
>> +    items:
>> +      - const: TLMM summary IRQ
>> +
>> +  interrupt-controller: true
>> +
>> +  '#interrupt-cells':
>> +    const: 2
>> +
>> +  gpio-controller: true
>> +
>> +  '#gpio-cells':
>> +    const: 2
>> +
>> +  wakeup-parent:
>> +    maxItems: 1
>> +    description:
>> +      Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
>> +      a general description of GPIO and interrupt bindings.
>> +
>> +      Please refer to pinctrl-bindings.txt in this directory for details of the
>> +      common pinctrl bindings used by client devices, including the meaning of the
>> +      phrase "pin configuration node".
>> +
>> +      The pin configuration nodes act as a container for an arbitrary number of
>> +      subnodes. Each of these subnodes represents some desired configuration for a
>> +      pin, a group, or a list of pins or groups. This configuration can include the
>> +      mux function to select on those pin(s)/group(s), and various pin configuration
>> +      parameters, such as pull-up, drive strength, etc.
>> +
>> +
>> +# PIN CONFIGURATION NODES
>> +patternPropetries:
>> +  '^.*$':
>> +    if:
>> +      type: object
>> +    then:
> Nope, that's not correct binding. It does not work. It never worked.
>
> Please do it exactly like:
> https://lore.kernel.org/linux-devicetree/20220930200529.331223-1-krzysztof.kozlowski@linaro.org/T/#m08b62ef5d873a52a5cbf3c53b25eff03726e7a16
> https://lore.kernel.org/linux-devicetree/20220927173702.5200-1-krzysztof.kozlowski@linaro.org/T/#t
Understood; will correct the binding.
>
>> +      properties:
>> +        pins:
>> +          description:
>> +            List of gpio pins affected by the properties specified in
>> +            this subnode.
>> +          items:
>> +            oneOf:
>> +              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
>> +              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
>> +            minItems: 1
>> +            maxItems: 36
>> +        function:
>> +          description:
>> +            Specify the alternative function to be configured for the
>> +            specified pins. Functions are only valid for gpio pins.
>> +          enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
>> +            atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk,
>> +            cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
>> +            cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0,
>> +            cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1,
>> +            gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
>> +            mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1,
>> +            mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
>> +            mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9,
>> +            nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1,
>> +            phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
>> +            phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
>> +            phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
>> +            phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
>> +            phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
>> +            pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
>> +            qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
>> +            qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
>> +            qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
>> +            qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
>> +            qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15,
>> +            qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8,
>> +            qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd,
>> +            sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
>> +            tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
>> +            uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0,
>> +            vfr_1, vsense_trigger]
>> +        drive-strength:
>> +          enum: [2, 4, 6, 8, 10, 12, 14, 16]
>> +          default: 2
>> +          description:
>> +            Selects the drive strength for the specified pins, in mA.
>> +        bias-pull-down: true
>> +        bias-pull-up: true
>> +        bias-disable: true
>> +        output-high: true
>> +        output-low: true
> You miss blank lines in several places. Please do it exactly like I
> shown for sdm845.
Ditto for above.
>
>> +      required:
>> +        - pins
>> +        - function
>> +      additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    tlmm: pinctrl@03000000 {
>> +      compatible = "qcom,qdu10000-tlmm";
>> +      reg = <0x03000000 0xdc2000>;
>> +      interrupts = <0 208 0>;
> Use defines.
Understood.
>
>> +      gpio-controller;
>> +      #gpio-cells = <2>;
>> +      interrupt-controller;
>> +      #interrupt-cells = <2>;
>> +      wakeup-parent = <&pdc>;
> Missing children.
Will add.
>
>> +    };
> Best regards,
> Krzysztof
Thanks,
Melody
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
new file mode 100644
index 000000000000..e8d938303231
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
@@ -0,0 +1,133 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
+
+maintainers:
+  - Melody Olvera <quic_molvera@quicinc.com>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,qdu1000-tlmm
+      - const: qcom,qru1000-tlmm
+
+  reg:
+    items:
+      - description: Base address of TLMM register space
+      - description: Size of TLMM register space
+
+  interrupts:
+    minItems: 0
+    maxItems: 1
+    items:
+      - const: TLMM summary IRQ
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  wakeup-parent:
+    maxItems: 1
+    description:
+      Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+      a general description of GPIO and interrupt bindings.
+
+      Please refer to pinctrl-bindings.txt in this directory for details of the
+      common pinctrl bindings used by client devices, including the meaning of the
+      phrase "pin configuration node".
+
+      The pin configuration nodes act as a container for an arbitrary number of
+      subnodes. Each of these subnodes represents some desired configuration for a
+      pin, a group, or a list of pins or groups. This configuration can include the
+      mux function to select on those pin(s)/group(s), and various pin configuration
+      parameters, such as pull-up, drive strength, etc.
+
+
+# PIN CONFIGURATION NODES
+patternPropetries:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in
+            this subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
+              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+            minItems: 1
+            maxItems: 36
+        function:
+          description:
+            Specify the alternative function to be configured for the
+            specified pins. Functions are only valid for gpio pins.
+          enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+            atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk,
+            cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+            cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0,
+            cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1,
+            gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+            mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1,
+            mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+            mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9,
+            nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1,
+            phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+            phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
+            phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+            phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
+            phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
+            pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
+            qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+            qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
+            qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
+            qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+            qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15,
+            qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8,
+            qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd,
+            sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
+            tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+            uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0,
+            vfr_1, vsense_trigger]
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+        bias-pull-down: true
+        bias-pull-up: true
+        bias-disable: true
+        output-high: true
+        output-low: true
+      required:
+        - pins
+        - function
+      additionalProperties: false
+
+examples:
+  - |
+    tlmm: pinctrl@03000000 {
+      compatible = "qcom,qdu10000-tlmm";
+      reg = <0x03000000 0xdc2000>;
+      interrupts = <0 208 0>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      wakeup-parent = <&pdc>;
+    };